• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.99-105
• /
• 2003

지방을 함유하고 있는 붉은자루 동충하초는 일반적으로 분쇄에 널리 사용되고 있는 핀밀이나 해머밀로 분쇄하기에는 어려움이 있다 핀밀이나 해머밀은 분쇄 로터날과 분쇄망사이의 갭사이에서 로터의 회전에 의하여 발생하는 원심력을 이용 충격과 마찰로 분쇄물을 분쇄망의 홀크기에 의존하여 분쇄를 하게된다. 이때 지방이 많은 분쇄물의 경우 로터와 망의 마찰로 인한 열방생으로 인하여 지방이 녹아 분쇄망의 홀을 매우는 눈막힘 현상이 발생하게 되어 분쇄를 더이상 할 수 없게 된다. (중략)

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.33-38
• /
• 2011

Economic development involves increase in life expectancy as well as human health care. Consequently, demand for fish meal and fish oil is rapidly growing. In particular, Krill (Eupausia superba) oil product is in high demand due to its rich unsaturated-fatty acid, and thus stable supplies are necessary in the krill oil market. It is required for captured krills to be immediately frozen and stored during ship transport, since proteins of the krill are quickly denatured in natural temperature condition. However, the transportation cost has been sharply increased, which encourages researchers to involve in studies for development of efficient oil extraction process. In this study, a solid/liquid separation technique on boat for the krill oil was developed through triple separation tests using only a separator or using either brush or crusher prior to the separator. The separation tests revealed that the efficiency were 46.2, 60.2 and 60.4 % by the separator, combination with brush, and combination with crusher, respectively. In addition, it was found that byproduct, extracted cake, derived from the separation process could be used as a feed stuff. These results suggest that smashing using the brush or crusher prior to the separator is more efficient than using only the separator.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.409-415
• /
• 2021

Medical waste management is becoming increasingly important, specifically in light of the current COVID-19 pandemic, as hospitals, clinics, quarantine centers, and medical research institutes are generating tons of medical waste every day. Previously, a traditional incineration process was utilized for managing medical waste, but the lack of landfill sites, and accompanying environmental concerns endanger public health. Consequently, an innovative sterilization shredding system was developed to resolve this problem. In this research, we focused on the design and numerical analysis of a shredding system for hazardous and infectious medical waste, to establish its operational performance. The shredding machine's components were modeled in a CAD application, and finite element analysis (FEA) was conducted using ABAQUS software. Static, fatigue, and dynamic loading conditions were used to analyze the structural stability of the cutting blade. The blade geometry proved to be effective based on the cutting force applied to shred medical waste. The dynamic stability of the structure was verified using modal analysis. Furthermore, an S-N curve was generated using a high cycle fatigue study, to predict the expected life of the cutting blade. Resultantly, an appropriate shredder system was devised to link with a sterilization unit, which could be beneficial in reducing the volume of medical waste and disposal time, thereof, thus eliminating environmental issues, and potential health hazards.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.8-14
• /
• 2020

In the air current pulverizing type grinding method, the blade wings fitted inside a casing are rotated at a high speed to generate a cornering air current, which facilitates the collision of materials with one another, leading to the pulverizing phenomenon. In contrast to mechanical grinding, grit pulverizing leads to fine grinding and less acid waste and degeneration of the material. Moreover, this approach prevents the loss of nutritional value, while allowing the milling grain to have an excellent texture. However, the existing air current pulverizing type machines consist of prefabricated blades, which cannot be rotated at a speed higher than 5,000 rpm. Consequently, the grinding process becomes time consuming with a low productivity. To overcome these problems, in this study, the shape and structure of the air current pulverizing type wings were optimized to allow rapid grinding at more than 8,000 rpm. Moreover, the optimal design for the ripening parts for the air current pulverizing type device was determined by performing a computational fluid dynamics analysis based on airflow analyses to produce machinery that can grinding materials to the order of micrometers.

• Cement
• /
• s.189
• /
• pp.41-48
• /
• 2011

고로시멘트는 포틀랜드시멘트와 고로슬래그의 혼합시멘트로, 최근에는 특히 저탄소 녹색성장 환경에 우수한 시멘트로서 관심이 모아지고 있다. 1824년 영국의 연와공 조셉 아스프딘(Joseph Aspdin)에 의해 발명된 포틀랜드시멘트는 약 184년의 역사를 가지고 있는 반면에, 일본의 슬래그시멘트 역사는 작년이 탄생부터 정확히 100년이 되기 때문에, 잠시 그 역사의 일부를 돌이켜 생각해 보고자 한다. 최근 슬래그시멘트는 건설시장에서 보통포틀랜드시멘트와 경쟁하기 위하여 발열억제를 위한 저발열고로시멘트를 개발하고, 강도경쟁에 의한 품질안정을 위하여 분리분쇄 추진, 고로슬래그에 적합한 클링커를 개발하고, 자기 수축 저감 등을 위한 연구도 병행하고 있다. 날로 심화되는 건설환경에서 살아 남기 위한 여러 방법들이 강구되고 있는 것이다. 고로시멘트는 보통포틀랜드시멘트와 비교해서 중성화, 강도발현을 위한 충분한 습윤양생 등 몇 가지 약점도 있지만, 슬래그시멘트 본연의 고유의 특성을 잘 나타내는 내해수성, 내염성, ASR 등의 장점들도 않고 "환경에 뛰어난" 시멘트로 각인된 만큼, 갖고 있는 특징들을 충분히 잘 활용하고, 개선 보완 시켜나가면 21세기의 최상의 재료로 평가 받을 수 있다고 기대해 본다. 끝으로, 본 자료는 신일철고로시멘트(주)단(檀)이 기고한 (콘크리트공학 2010년 10월호) 논문을 요약 발췌한 것이다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.3-41
• /
• 2009

인류가 위성을 발사하기 시작하면서 수많은 우주파편이 발생하게 되었고 이로 인하여 우주파편 환경은 날이 갈수록 심각해지고 있다. 우주공간을 비행하는 우주물체는 분쇄된 파편, 임무 관련 파편, rocket body 그리고 운용위성으로 구분된다. U.S. Space Surveillance Network에 따르면 10cm 이상 크기를 갖는 물체는 현재 13,000개가 넘는다고 알려지고 있고 질량만 해도 6,000톤이 넘는다. 이런 우주파편 환경으로 인하여 우주파편 간의 충돌, 우주파편과 운용위성 간의 충돌 또는 운용위성 간의 충돌에 대한 우려가 꾸준히 제기되어왔고, 불행하게도 2009년 2월 10일 Iridium 33과 Cosmos 2251 위성이 고도 790km 부근에서 충돌하여 1,300여개의 우주파편이 발생했다. 또한 2007년에 중국이 고도 860km 부근에서 750kg에 해당하는 자국의 위성(FY-1C)을 미사일로 격추시킴에 따라 2500여개의 우주파편이 발생하여 저궤도의 우주파편 환경을 더욱 심각하게 만들고 있다. 운용위성과 우주파편과의 충돌 가능성을 분석하기 위해서는 우주파편 및 위성의 궤도정보를 알아야 한다. 이를 위해서 NORAD(North American Aerospace Defense Command)에서 제공하는 TLE(Two Line Element)가 주로 이용된다. 하지만 관측 및 궤도 결정 특성상 수 km의 오차를 포함하므로 궤도정보의 공분산이 크다는 단점이 있으므로 충돌 분석을 수행하는데 있어 한계가 있다. 이 논문은 충돌분석 수행에 있어 TLE 정보만을 이용한 경우뿐만 아니라 정밀궤도와 TLE를 동시에 이용한 경우를 비교함으로써 충돌 불확실성의 해소방안을 제시할 계획이다.

• Elastomers and Composites
• /
• v.38 no.2
• /
• pp.128-138
• /
• 2003

It goes to be serious with environmental pollution because of great number of waste tires scrapped each you. That is why there are lots of studies for efficient recycle. We tried to reduce particle size of the waste tire powder using a new technology of self-designed grinding machine (SDGM) and ultrasonic treatment. The purpose of this study is to improve the physical properties of reduced waste tire powder. We investigated the fine powder by particle size distribution(PSD) analysis. And also we examined the physical and mechanical properties and cross-link density at various particle sire. Also we carried out morphological studies after making the products by SEM.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.125-132
• /
• 2009

Extracts and fractions of Inonotus obliquus (Chaga in Russia) have been known to have various biological activities, including antimutagenic, anticancer, antioxidative, and immunostimulating effects. This study was performed to confirm anticancer effect of 10% superfine Chaga mushroom processed by nano-mill technology on C57BL/6 mice. Chaga particles belonged in the size of 1 ${\mu}m$ was about 40% after nanomill processing according to the volume distribution. As the result of subcutaneous injection of B16BL6 melanoma cells to the mice, the tumor volume (p<0.001) and tumor weight (p<0.01) was significantly decreased in the experimental (NCh) group as compared with control (C) group and the tumor growth inhibitory rate was 29.2%. On examination of survival rate after intraperitoneal injection of B16BL6 melanoma cells, the mean survival time per a mouse was 17.7 and 26.0 days in C and NCh group respectively. The survival rate of NCh group was 40% when that of C group was 0% at the 35th day. On the result of examination to confirm histological toxicity by Chaga superfine particles, both groups did not show any morphological and pathological changes in the small and large intestine under the light microscope. These results suggest that feeding of superfine Chaga produced by nanomill technique has a tumor growth inhibitory effect in vivo.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.82-89
• /
• 2009

According to the great city development and the rapid growth of redevelopment project, waste concrete emission has been increased. Waste concrete powder is one of the by-product originated from the recycling of the waste concrete. The more making high quality recycled aggregate to use aggregate for concrete, the more waste concrete powder is producted relatively. Therefore, to realize the total recycling of waste concrete, development of recycling technology for waste concrete powder need very much. This technical note present the discharged process and the various properties of waste concrete powder. As the results, on the average, the maximum particle-size of waste concrete powder is less than $600{\mu}m$, and oven-dry density is less than $2.5g/cm^3$. And waste concrete powder contains more than 50% of $SiO_2$, 30% of CaO and 10% of $Al_2O_3$. Thus qualities of waste concrete powder is lower than those of high quality raw material for concrete. However, if it is processed by grading to the purpose, it will be used as resource of raw materials for construction field.