• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.205-205
• /
• 2019

우리나라에서 강우의 시간분포를 위해 보편적으로 사용되고 있는 방법은 Huff 4분위법으로 강우의 시간적 분포특성을 나타내는 무차원 시간분포곡선을 제시한 것으로, 강우의 지속기간을 4분위로 구분하여 각 분위의 강우량 중 가장 큰 값이 속해 있는 구간을 선택하여 그 구간의 위치에 따라 분위를 정하는 방법이다. 현재 실무에서는 Huff의 분위별 곡선에 대한 회귀식은 지속기간 전반에 걸쳐 정확도가 높은 이유로 6차식을 적용하고 있으나, 통계 모델링에서 간결함의 원리에 따라 회귀식이 간결할 필요가 있으며, 통계적 유의수준에 기초하여 회귀계수를 결정하여야 하므로 유의성 검정 방법을 통한 검정결과를 비교할 필요가 있다. 따라서 본 연구에서는 다중회귀분석 방법에 따른 회귀계수 유의성 검정결과 비교를 위하여 구미지역의 무차원 누가우량 백분율을 이용한 시간분포 회귀식을 이용하여 유의성 검정 방법인 분산분석 방법(Analysis of Variance)과 변수선택 방법(Backward Selection)의 검정 결과를 도출 및 비교하였다. 통계프로그램인 프로그래밍 R을 이용하여 변수선택 방법 중 후방제거법 함수를 이용하여 최종 회귀식을 도출하고 또한 7차 회귀식을 분산분석을 이용한 후방제거법으로 회귀계수를 제거하는 방법으로 최종 회귀식을 산정하였다. 분산분석을 이용한 후방제거법의 유의성 검정결과는 프로그래밍 R을 이용한 후방제거법의 결과와 동일한 것으로 분석되었다. 일반적으로 설계강우량의 시간분포를 위한 방법으로 사용되고 있는 Huff의 4분위 방법의 시간분포 회귀식은 회귀계수의 유의성 검정이 이루어지고 있지 않으므로 본 연구결과를 통해 설계강우량 시간분포 회귀식의 유의성 검정방법 제시 및 결과도출과정을 통해 시간분포 회귀식 산정기법으로 활용할 수 있을 것으로 사료된다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.17-26
• /
• 2008

In this paper, we propose a distributed multi-view video coding method employing illumination compensation for multi-view video coding. Distributed multi-view video coding (DMVC) methods can be classified either into a temporal or an inter-view interpolation-based ones according to ways to generate side information. DMVC with inter-view interpolation utilizes characteristics of multi-view videos to improve coding efficiency of the DMVC by using side information based on the inter-view interpolation. However, mismatch of camera parameters and illumination change between two views could bring about inaccurate side information generation. In this paper, a modified distributed multi-view coding method is presented by applying illumination compensation in generating the side information. In the proposed encoder system, in addition to parity bits for AC coefficients, DC coefficients are transmitted as well to the decoder side. By doing so, the decoder can generate more accurate side information by compensating illumination changes with the transmitted DC coefficients. We found that the proposed algorithm is $0.1{\sim}0.2\;dB$ better than the conventional algorithm that does not make use of illumination compensation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.152-160
• /
• 2000

This paper addresses the analysis and design of fuzzy-model-based controller for nonlinear systems using extended PDC and optimal pole-placement schemes. In the design procedure, we represent the nonlinear system using a Takagi-Sugeno fkzy model and formulate the controller rules by using the extended parallel distributed compensator (EPDC) and construct an overall fuzzy logic controller by blending all local state feedback controllers with an optimal pole-placement scheme. Unlike the commonly used parallel distributed compensation technique, by blending a newly extended parallel distributed compensator and the optimal poleplacement schemes, we can design not only a local stable k z y controller but also an overall stable fuzzy controller to perform the tacking control objective. Furthermore, a stability analysis is carried out not only for the fuzzy model but also for a real nonlinear system. Finally. the effectiveness and feasibility of the proposed fizzy model-based controller design method has been shown through a simulation example.

• Journal of the Korea Society for Simulation
• /
• v.18 no.2
• /
• pp.9-17
• /
• 2009

A face database has contained a large amount of facial information data since face recognition was widely used. With the increase of facial information data, the face recognition based on distributed processing method has been noticed as a major topic. In existing studies, there were lack of discussion about the transferring method for large data. So, we proposed a fuzzy logic-based bit compression rate selection method for distributed face recognition. The proposed method selects an effective bit compression rate by fuzzy inference based on face recognition rate, processing time for recognition, and transferred bit length. And, we compared the facial recognition rate and the recognition time of the proposed method to those of facial information data with no compression and fixed bit compression rates. Experimental results demonstrates that the proposed method can reduce processing time for face recognition with a reasonable recognition rate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.148-156
• /
• 2007

The fiber dispersion in fiber-reinferced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. However, evaluation of the fiber dispersion in the composite PVA-ECC (polyvinyl alcohol-engineered cementitious composite) is extremely challenging because of the low contrast of PVA fibers with the cement-based matrix. In the present work, a new evaluation method is developed and demonstrated. Using a fluorescence technique on the PVA-ECC, PVA fibers are observed as green dots in the cross-section of the composite. After capturing the fluorescence image with a charged couple device (CCD) camera through a microscope, the fiber dispersion is evaluated using an image processing technique and statistical tools. In this image processing technique, the fibers are more accurately detected by employing an enhanced algorithm developed based on a discriminant method and watershed segmentation. The influence of fiber orientation on the fiber dispersion evaluation was also investigated via shape analyses of fiber images.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.14-24
• /
• 2012

DVC (Distributed Video Coding) techniques need feedback channel for parity bit control to achieve the good RD performances, however, this causes the DVC system to have high decoding latency. In order to implement in real time environments and to accelerate commercializations, many research works have been focusing on the development of fast video decoding algorithm. As one of the real time implementations, this paper deals with a novel DVC scheme suitable for some application areas where source statistics such as motion information can be provided to the encoder side from the decoder side. That is, this paper propose a fast distributed video decoding scheme to improve the decoding speed by using the feedback of motion information derived in SI generation. Through computer simulations, it is shown that the proposed method outperforms the conventional fast DVC decoding schemes.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.9-15
• /
• 2022

In order to overcome the limitation of conventional nanoparticle dispersion methods such as sonicator or homogenizer, a filtration method using an ultrasonic atomization effect and cyclones was proposed in this study. A 0.5 wt% suspension was made with Al₂O₃ powder with an average diameter of 250 nm. The suspension was filtered by the proposed method after pre-dispersing using a sonicator and a homogenizer, respectively. As the result, in the case of the suspension after pre-dispersing with a sonicator, the particle size distribution of the filtered suspension started showing up a single normal distribution indicating the mode of the average diameter only after the 3rd cyclone process. On the other hand, in the case of the suspension with the homogenizer pre-dispersion, similar results appeared from the 2nd cyclone process. Filtration of various types of nanoparticles is expected to be possible by adjusting ultrasonic atomization frequency and manipulating the design of the cyclone.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2009

Let us consider that the variance function in regression model has a discontinuity/change point at unknown location. Yu and Jones (2004) proposed the local polynomial fit to estimate the log-variance function which break the positivity of the variance. Using the local polynomial fit, Huh (2008) estimate the discontinuity point of the log-variance function. We propose a test for the existence of a discontinuity point in the log-variance function with the estimated jump size in Huh (2008). The proposed method is based on the asymptotic distribution of the estimated jump size. Numerical works demonstrate the performance of the method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.261-262
• /
• 2008

분산제의 종류와 함량이 무기물-유기물 복합재료의 레올로지 특성 및 유전특성에 미치는 영향에 대하여 고찰하였다. 먼저 Multiple light scattering 방법을 통하여 용액의 입자 이동속도와 용액의 맑은층의 두께변화를 살펴보았으며 이를 통해 적정한 분산제의 선정 및 선정된 분산제의 함량비에 따른 무기물 분말의 분산 특성을 고찰하였다. 그리고 테이프 캐스팅을 통하여 테이프를 제작한 후 1GHz에서 유전특성을 측정하였다. 위 결과들을 통하여 분산제의 종류와 함량비에 따라 용액 및 슬러리의 특성이 다르며 적정한 분산제를 사용하여 유전상수 16.5에 유전손실 0.0058의 복합재료를 제작할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.2
• /
• pp.108-115
• /
• 2003

Two types of one-dimensional dispersion-correction scheme are developed to take into account the dispersion effects for the simulation of tsunami propagation using ADCIRC finite element model based on shallow-water equations The first is an implicit scheme, and the dispersion-correction is accomplished by controlling the weighting factor assigned to each spatial derivative term of different time levels. The other scheme is explicit and the dispersion is considered by adjusting the element size. The validity of the dispersion-correction scheme proposed in this study is confirmed through the comparison of numerical solutions calculated using the new schemes with analytical ones considering dispersion effect of waves.