• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2015

In this study, to obtain isoindoline compounds with the high thermal resistance and reddish yellow color using an environmental friendly method without the use of any surfactants, isoindoline derivatives with different structures were added at various reaction temperatures for the synthesis and the product was then crystallized by controlling temperatures and times in autoclave. Chemical structures, particle sizes, color differences, and optical properties were evaluated by the means of FT-IR, FE-SEM, UV-Vis spectroscopy, PSA (particle size analyzer) and Zeta potential analyzer. The samples with an enhanced dispersibility, highly thermal resistance, uniform particle sizes were achieved possibly due to the addition of isoindoline derivatives into the crystallization processing mixtures. The color change trend was also observed depending upon synthesis conditions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.240.2-240.2
• /
• 2011

그라파이트 산화물(graphite oxide;G.O)는 그라파이트와는 다르게 물에서의 분산 능력이 뛰어나고 다양한 기판상에 단일 G.O layer를 형성할 수 있는 특성을 가지고 있으며, 유연(flexible)하고 투명(transparent)하기 때문에 다양한 전 자기 디바이스에 적용 가능하다. 특히, 최근 자성산화물 나노입자(magnetic oxide nanoparticles)에 대한 연구가 집중되고 있는데, 이러한 자성 나노입자와 G.O와의 복합체에 대한 연구는 다양한 분야로의 적용성에 대한 새로운 길을 열어주고 있다. 본 연구에서는 화학적 처리법을 적용하여 자성 나노입자(Co 나노입자)와 G.O 복합체를 제조하였다. Natural Graphite powder (N.G)에 $H_2O_4$ (98%) 및 $(NH_4)_2SO_4$를 적정 몰비로 첨가하여 반응 시킨 후 공기 중에서 열처리 공정을 수행하여 expanded graphite (E.G)를 제조 하였다. 열처리된 E.G를 $1,050^{\circ}C$ 온도에서 15~30초 및 30~60초 동안 공기 중에서 열처리 하여 expanded graphite oxide (E.G.O)를 제조하였으며, E.G.O와 $Co(acac)_3$의 화학적 반응을 통하여 Co 자성나노입자-G.O 복합체를 제조하였다. N.G, E.G, E.G.O 및 E.G.O+Co입자의 결정구조 분석을 위하여 XRD 측정을 수행하였으며, FTIR을 이용하여 각 단계에서의 반응성에 대한 연구를 수행하였다. 각 단계에서 표면 및 내부 미세구조 특성 분석을 위하여 SEM, TEM, 및 EDX 분석을 수행하였으며, E.G.O+Co 복합체의 자기적 특성 평가를 위하여VSM (vibrating sample magnetometer) 측정을 수행하였다. 이러한 연구 결과는 향후 자성나노입자와 그라핀과의 복합화를 위한 기저 기술로 활용가능하리라 판단된다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.195-201
• /
• 1997

The present paper describes the effect of dry mixed grinding on kaolinite-aluminum trihydroxide mixture with a planetary ball mill before sintering and its influence on mullite formation during sintering. The size reduction of the mixture is market in the early stage of grinding and the obtained fine particles agglomerate subsequently with an increase of grinding time. The crystal structure of the mixture is collapsed easily into an amorphous one by planetary ball milling, of which amount increases with an increase of grinding time. Only mullite phase except for anatase as an inherent impurity in kaolinite appeared in the sintered body of the mixtures with mixed grinding as relatively lower temperature 1523K, while corundum, cristobalite, and Al-Si spinel phases, besides mullite were formed in the sintered body of the mixture without mixed grinding. Therefore, the mixed grinding treatment is very effective to improve the homogeneous mixing and disp-ersion of the mixture of raw materials on a micro scale and to decrease the thermal decomposition tem-perature by crystal structure change of them so as to obatin direct preparation of mullite with high purity at relatively low temperature.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.141-141
• /
• 2000

한지의 제조에 있어서 부원료인 점질물은 초지시 매우 중요한 역할을 하는데 그 주된 역 할은 다음과 같다. 먼저 점질물은 섬유의 분산을 용이하게 하고 종이의 강도를 증가시키며, 양지와는 달리 박엽지의 제조가 편리하고, 종이의 경도를 증가시키며, 습지의 처리를 용이하 게 하며, 점성으로 인하여 섬유의 침전올 방지하고, 종이의 광택을 향상시키는 둥 매우 중요 한 역할을 한다. 그러나 한지 제조시 이러한 식물성 점제의 미묘한 작용은 현재 대다수의 한지 제조 공장에서 사용하고 있는 합성점제인 PAM이나 PEO 등의 합성 고분자 화합물에 서는 기대하기 어려운 작용이라 여겨진다. 이와 같은 사실에서 본 연구에서는 전통적인 천 연점질물인 황촉규근의 점질물과 합성점제인 PAM 및 우리 나라에서 전혀 사용되지 않고 있는 나무수국 내수피의 점질물을 이용하여 한지를 제조하고 이들 한지의 특성을 SEM 및 A AFM(Atomic Force Microscopy)를 이용하여 분석하였다. 먼저 각각의 점질물로 제조한 한지를 SEM으로 관찰한 결과 닥나무 인피섬유의 최외층에 투명막이 존재하는 사실을 발견할 수 있었다. 이러한 투명막은 닥나무나 뽕나무 인피섬유에 만 존재하고 삼지닥나무나 산닥나무 둥과 같은 기타 인피섬유에는 존재하지 않으므로 한지 의 원료 섬유의 식별에 매우 중요한 요소가 된다. 또한 이러한 투명막은 섬유간 결합을 증 대시켜 한지의 강도 발현에 기여한다고 사료된다. 천연점질물인 황촉규근과 나무수국 점 질물을 이용하여 제조한 한지를 SEM 및 SEM-EDXA를 이용하여 분석한 결과, 황촉규근 점질물로 제조한 한지에는 상당량의 전분입자가 폰재하고 있었으며 나무수국 점질물로 제 조한 한지에는 침상의 수산칼슐 결정이 상당량 존재하고 있는 사실을 발견하였다. 이러한 사실은 한지 제조시 사용된 점질물의 식별에 중요한 요소라 사료된다. 한지의 원료인 닥나무 인피펄프와 침엽수 미표백 크라프트 펄프를 AFM을 이용하여 분석 한 결과, 닥나무 인피펄프의 마이크로피브릴 폭은 5-10nm로 Sw-UKP의 마이크로피브릴 폭 lO-20nm보다 매우 가늘고, 치밀한 세포벽 구조를 하고 있었다. 닥나무 인피펄프의 이러 한 세포벽 구조 및 마이크로피브렬의 형태가 Sw-UKP보다 높은 섬유강도를 나타내는 원인 이라 사료된다. 각각의 점질물을 이용하여 제조한 한지의 섬유표면을 AFM을 이용하여 관 찰한 결과, 원료펄프의 표면관찰에서와는 달리 초지시 사용된 점질물이 섬유표면을 피복하 고 있어 명확한 형태의 마이크로피브렬을 관찰할 수 가 없었다. 따라서 점질물의 이러한 역 할이 한지의 강도 및 보존성 향상에 기여하리라 사료된다.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.17-23
• /
• 2013

Clustering is required to configure clustering interdependent structural technology. Clustering handles variable workloads or impede continuity of service to continue operating in the event of a failure. Long as high-availability clustering feature focuses on server operating systems. Active-standby state of two systems when the active server fails, all services are running on the standby server, it takes the service. This function switching or switchover is called failover. Long as high-availability clustering feature focuses on server operating systems. The cluster node that is running on multiple systems and services have to duplicate each other so you can keep track of. In the event of a node failure within a few seconds the second node, the node shall perform the duties broken. Structure for high-availability clustering efficiency should be measured. System performance of infrastructure systems performance, latency, response time, CPU load factor(CPU utilization), CPU processes on the system (system process) channels are represented.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.51-70
• /
• 1995

Types of foundation of high rise buildings are primarily determined by loads transmitted from super structure, soil bearing capacity and available construction technology, The use of deep foundation of the buildings considered in this study due to the fact that rock of enough bearing capacity is not found down until 90~l00m. When a concentration of high soil pressure must be distributed over the entire building area, when small soft soil areas must be bridged, and when compressible strata are located at a shallow depth, mat foundation may be useful in order to have settlement and differential settlement of variable soils be minimized. The concept of mat foundation will also demonstrate some difficulties of applications if the load bearing demand directly carried down to the load -bearing strata exceeds the load -bearing capacity. This paper introduces both the analysis and design of mat type foundation for high rise buildings as well as the method-ology of modelling of the soil foundation, especially, engineered to redistribute the stress exceeding the soil bearing capacity. This process will result in the wide spread of stresses over the entire building foundation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1147-1158
• /
• 2006

Clustering algorithm is an essential element to implement a hierarchical routing protocol, especially for a large-scale wireless sensor network. In this paper, we propose a new type of energy-efficient clustering algorithm, which maximizes the physical distance between cluster head and gateway by a neighbor node discovery mechanism. Furthermore, a slave/master patching scheme is introduced as a useful means of further improving the energy-efficiency. It has been shown that the number of cluster heads can be reduced by as many as 21% as compared with the existing clustering algorithms.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell structure nanoparticles were synthesised by sol-gel process, and the morphology and crystallinity of TiO$_2$ shell were investigated by TEM and UV-Vis. absorption spectrometer. Au/TiO$_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of TOAA (Titanium Oxide Acethylacetonate) in Au colloid ethanol solution with $H_2O$. The thickness of TiO$_2$ shell on the surface of Au particles was about 1 nm. To investigate the crystallinity of TiO$_2$ shell, UV light with 254 nm and radioactive lay of $^{60}$ CO were irradiated on the TiO$_2$ coated Au colloid ethanol solution. The surface plasmon phenomenon of Au nanoparticles appeared only when the radioactive lay was irradiated on the TiO$_2$ coated Au colloid ethanol solution. From these results, it was found that the TiO$_2$ shell was amorphous and the MUA (Mercaptoundecanoic Acid) layer on the Au particle for its dispersion didn't act as an obstacle to disturb the movement of electron onto the surface of Au particle.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.3
• /
• pp.419-446
• /
• 2012

National statistical system in Korea has developed along with national economic agenda such as a government oriented high economic growth and has formed to a typical diversified statistical system. While the national statistics have been produced whenever they are needed, they are facing the critics that production of basic statistics were lack of balance. Grasping the statistical demand properly, enhancing the statistical concurrence with international organization, preventing the production of overlapped and similar statistics, and improving the professionalism of manpower in statistical industry are the structural problems that Korean statistical system has to get over. It is important to strengthen the coordination mechanism and the governance structure of the national statistical system to level up the integrity and credibility of statistical program. The length of Chief Statistician's tenure need to be assured.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.929-932
• /
• 2012

Novel platform technology has been developed to replace the photolithography used currently for manufacturing semiconductors and display devices. As a substrate, plastics, especially polycarbonates, have been considered for future application such as flexible display. Other plastics, i.e. polyimide, polyetheretherketon, and polyethersulfone developed for the substrate at this moment, are available for photolithography due to their high glass transition temperature, instead of high price. After thin polystyrene film was coated on the polycarbonate substrate, microstructure of the film was formed with polydimethylsiloxane template over the glass transition temperature of the polystyrene. The surface of the structure was treated with potassium permanganate and octadecyltrimethoxysilane so that the surface became hydrophobic. After this surface treatment, the nanoparticles dispersed in aqueous solution were aligned in the structure followed by evaporation of the DI water. Without the treatment, the nanoparticles were placed on the undesired region of the structure. Therefore, the interfacial interaction was also utilized for the nanoparticle alignment. The surface was analyzed using X-ray photoelectron spectrometer. The evaporation of the solvent occurred after several drops of the solution where the hydrophilic nanoparticles were dispersed. During the evaporation, the alignment was precisely guided by the physical structure and the interfacial interaction. The alignment was applied to the electric device.