Analysis and Design of Mat Foundation for High -Ribe Buildings

초고층 건물의 전면기초(MAT 기초) 해석 및 설계

  • 홍원기 (건영(주) 엔지니어링 사업본부) ;
  • 황대진 (삼성 건설(주) 기술연구소, 정삼성건설(주) 기술연구소) ;
  • 권장혁
  • Published : 1995.06.01

Abstract

Types of foundation of high rise buildings are primarily determined by loads transmitted from super structure, soil bearing capacity and available construction technology, The use of deep foundation of the buildings considered in this study due to the fact that rock of enough bearing capacity is not found down until 90~l00m. When a concentration of high soil pressure must be distributed over the entire building area, when small soft soil areas must be bridged, and when compressible strata are located at a shallow depth, mat foundation may be useful in order to have settlement and differential settlement of variable soils be minimized. The concept of mat foundation will also demonstrate some difficulties of applications if the load bearing demand directly carried down to the load -bearing strata exceeds the load -bearing capacity. This paper introduces both the analysis and design of mat type foundation for high rise buildings as well as the method-ology of modelling of the soil foundation, especially, engineered to redistribute the stress exceeding the soil bearing capacity. This process will result in the wide spread of stresses over the entire building foundation.

초고층 건물의 기초는 지반의 지지력, 경제성, 시공성 등이 고려되어 먼저 그 형태가 결정되게 된다. 이 논문에서 고려된 빌딩에서의 깊은 기초의 적용은 심도90~l00m까지 암반의 충분한 지내력이 확보되고 있지 않은데 기인한 것이다. 지반의 지지력이 전반적으로 그다지 크지 않으면서 상부 구조물이 어느 특정기등에 상당한 축력을 미치게 되는 경우 이곳에는 상대적으로 많은 침하가 예상되게 된다. 이러한 경우 전면기초(MAT기초)로 처리하면 지반에 미치는 큰 응력을 주위 지반으로 분산시켜 경제적이며 바람직한 설계가 가능하여 진다. 이때 약한 부분의 지반은 전면기초를 통하여 지지력의 여유가 있는 지반과 연결되게 되므로 전면기초가 이와 같은 휨모멘트나 전단력등을 전달할 수 있도록 설계된다면 기초의 부등침하를 방지할 수 있게되어 상부 구조물을 부등침하로 부터 안전하게 보존할 수 있게 된다. 본 논문은 이와같이 실제 계획, 설계중인 초고층 건물의 순수전면기초 해석 및 설계로서 일반 실무에도 연결될 수 있는 설계기법과 하중이 지반의 지내력을 초과하는 경우 응력의 재분배를 고려한 모델링 기법을 소개하고자 한다.

Keywords

References

  1. 콘크리트 변동균;신현묵;문제길
  2. Foundation Analysis and Design(3rd Ed.) Joseph E.Bowles
  3. Proceeding, ASCE Structures Congress of 93 Dynamic inelastic Analysis of tall Buildings Hong, Won Kee
  4. SAFE-Slab Analysis by the Finite Element Method Habibullah,A.
  5. Building Code Requirements for Reinforced Concrete American Concrete Institute
  6. 지질조사 보고 China Non-Ferrous-Metal Industry Changsha Survey InstituteHainan Branch