• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.101-109
• /
• 2022

The mobility and transport of radioactive cesium are crucial factors to consider for the safety assessment of high-level radioactive waste disposal sites in granite. The retardation of radionuclides in the fractured crystalline rock is mainly controlled by the hydrochemical condition of groundwater and surface reactions with minerals present in the fractures. This paper reports the experimental results of cesium sorption to the Wonju Granite, a typical Mesozoic granite in Korea, performed in an anaerobic chamber that mimics the anoxic environment of a deep disposal site. We measured the rates and amounts of cesium (¹³³Cs) removed by crushed granite samples in different electrolyte (NaCl, KCl, and CaCl₂) solutions and a synthetic groundwater solution, with variations in the initial cesium concentration (10^-5, 5×10^-6, 10^-6, 5×10^-7 M). The cesium sorption kinetic and isotherm data were successfully simulated by the pseudo-second-order kinetic model (r²= 0.99) and the Freundlich isotherm model (r²= 0.99), respectively. The sorption distribution coefficient of granite increased almost linearly with increasing biotite content in granite samples, indicating that biotite is an effective cesium scavenger. The cesium removal was minimal in KCl solution compared to that in NaCl or CaCl₂ solution, regardless of the ionic strength and initial cesium concentration that we examined, showing that K⁺ is the most competitive ion against cesium in sorption to granite. Because it is the main source mineral of K⁺ in fracture fluids, biotite may also hinder the sorption of cesium, which warrants further research.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.2
• /
• pp.14-23
• /
• 2022

The purpose of this study is to preserve the sustainable traditional landscape of the "Terraced Paddy Fields of Gacheon Village, Namhae". To this end, the changes in the traditional landscape and its factors were analyzed, and a conservation plan was sought to coexist with local communities. The results are as follows; First, the traditional scenery of "Terraced Paddy Fields of Gacheon Village, Namhae" is characterized by stonework built on a steep topography to secure cultivated land and narrow rice fields. To this end, local communities have maintained the traditional landscape through their long-established traditional knowledge, but after the designation of cultural heritage, the unique landscape of the "Terraced Paddy Fields of Gacheon Village, Namhae" changed as standardized stone construction methods were applied. Recently, the Cultural Heritage Administration recognized these problems and returned to the direct repair system of local communities, so cultivated land is regaining the scenery of the past. Second, the factors that changed the traditional landscape of the "Terraced Paddy Fields of Gacheon Village, Namhae" were largely found to be a decrease in voluntary conservation consciousness, a limited management range of preservation society, a decrease in agricultural population, and a lack of skilled traditional skills. After the designation of cultural heritage, expectations for policy support by the state or local governments accelerated the damage as existing farmland was neglected, and the lack of agricultural population also resulted in the same result. The preservation society is making efforts to preserve it, but the phenomenon of excessive and insufficient management personnel is intensifying. Conflicts between residents due to profit polarization have spread to the problem of escalating. In addition, there are concerns about the loss of traditional knowledge such as step farming technology and stone construction functions. Third, to suggest a win-win plan with local communities for preserving the traditional landscape, it is necessary to seek the ways to expand farming participants and generate profits through the placement of professional careers and public-private linkage system. In addition, it is desirable to improve the profit distribution system through the preservation society to strengthen the management authority and induce participation. And a support system is required for education on the transmission of terraced farming technology and stone construction functions.

• Korean Journal of Plant Resources
• /
• v.36 no.2
• /
• pp.172-180
• /
• 2023

In the current study, four groups; control, 500, 1000, and 2000 mg/L, were treated to investigate the effects of physiological and growth characteristics on Machilus thunbergii under various fertilization levels. As a result of the physiological response to the fertilization treatment, the fertilized group demonstrated relatively higher levels of A, ITE, WUEi, V_camx, PI_abs, and SFI_abs in comparison to the control. The best photosynthetic mechanism was most clearly seen at 1000 mg/L, which involved gas exchange through active stomatal opening and closing. For a productive photosynthetic mechanism. As seen in the growth response of M. thunbergii to fertilization treatment, the fertilized group has significantly higher height, DRC, leaf dry weight, stem dry weight, total dry weight, LWR, and SWR than the control group. A healthy seedling quality index was particularly evident at 1000 mg/L, and other growth indicators were also at a decent level. 500 mg /L also demonstrated growth characteristics that were comparable to those at 1000 mg/L. As a result, M. thunbergii featured the best physiological and growth characteristics in response to the fertilization treatment at 1000 mg/L, and 500 mg/L also showed a similar trend, which is considered to be a good option from an economical perspective.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.21-35
• /
• 2022

With the support of local and central governments, various incentive policies for "green" cars have been established, and the number of electric vehicle users has been rapidly increasing in recent years. As a result, much attention is being given to establishing a user-centered charging infrastructure. A standard for the number of electric vehicle chargers to be supplied is being prepared based on building characteristics, but there is quite limited research on the appropriate ratio of slow and fast chargers based on the characteristics of each place. Therefore, this study derived an appropriate penetration ratio based on data about the distribution ratio of common slow chargers. These data were collected using a survey of actual electric vehicle users. Next, an analysis was done on how to categorize the needs of charging environments and to determine what criteria or characteristics to use for categorization. Based on the results of the survey analysis, three types of places were derived. Type-1 places require 10% of chargers to be slow chargers, Type-2 places require 40-60% of chargers to be slow chargers (i.e., around equal distribution of slow and fast chargers), and Type-3 places require more than 80% of chargers to be slow chargers. The required levels of slow chargers were classified by place type and by individual using latent class cluster analysis, which made it possible to categorize them into five clusters related to socioeconomic variables, vehicle characteristics, traffic, and charging behaviors. It was found that there was a high correlation between charging behavior, weekend travel behavior, gender, and income. The results and insights from this study could be used to establish charging infrastructure policies in the future and to prepare standards for supplying charging infrastructure according to changes in the electric vehicle market.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.87-98
• /
• 2019

This study sought to identify the impact of scenarios, capital, manpower (directors, actors), media promotion, oral communication, and recognition on the intention of watching movies, and to present marketing and policy implications to film producers for ways to revitalize their films. Therefore, the implications of this study are as follows: First, if you watch a movie with a friend or introduce a movie, you should set up a marketing strategy to promote the movie as a oral message to the people around you through double points and free admission at the 10th movie. It will also require the promotion of the scenario to be strengthened so that people around them can recognize it naturally. Second, film production companies will have to improve the quality of their movies by readjusting the distribution of capital in the event of capital investment. In addition, the movie should be encouraged by the oral publicity that the huge amount of capital has enhanced the quality of the movie, as well as pre-experience events to help the audience recognize it. Third, filmmakers will have to choose directors and actors who can digest novel and experimental material over the director's or actor's reputation. Fourth, the movie promotion company should set up strategies to cater to visitors through a contest for ideas for promoting visitors, which can arouse interest among visitors. Fifth, movie promoters will have to set a sufficient promotional period for visitors to be aware of the film in advance. Finally, movie writers will have to create scenarios with a variety of materials that meet the needs of visitors. Also, movie officials will have to develop or create a mechanism for those who watch the movie to practice oral and cognitive skills.

• 한국노년학
• /
• v.39 no.4
• /
• pp.921-939
• /
• 2019

According to the social selectivity theory (SST), despite the disadvantages of life conditions, older adults experience less negative emotions because they regulate their emotions by avoiding negative stimuli or situations. Based on the SST, this study attempted to find out whether older adults are better able to regulate negative emotions than young adults in the Ultimatum Game (UG). In an UG, if the proposer proposes to distribute a portion of the money to the responder, the responder must decide whether to accept or reject it. If the responder accepts the offer, the proposer and the responder can each have their own share as proposed, but if s/he reject the offer, both get nothing. Thus, if the responder considers own economic benefits, it is a more reasonable decision to accept the unfair offer no matter how low, than to reject it. To accept an unfair offer, the responder must regulate the anger felt at the proposer. If older adults could regulate anger better than young adults, they would be less likely to reject the unfair offer than young adults. Fifty-seven olders and 60 university students participated in this study. Both the older and young adults accepted most of the fair offers. In contrast, older adults accepted unfair offers at a significantly higher rate than young adults. In addition, compared to young adults, older adults reported anger less frequently at the unfair offers. Accepting unfair offers was negatively correlated with anger report, but positively correlated with the emotion regulation measured by ERQ. The ERQ score was negatively correlated with anger report. Emotion regulation partially mediated the relationship between the age groups and acceptance of unfair offers. The present results showed that older adults accepted the unfair offers at a higher rate than young adults because they could regulate the negative emotions felt at the unfair offer better than young adults. This study provided new evidence for the claim that improving emotional regulation is a major developmental change in adulthood.

• Journal of Venture Innovation
• /
• v.6 no.4
• /
• pp.41-62
• /
• 2023

Given that SME workers are the driving force of national competitiveness and the basis and cornerstone of the industry, it is meaningful to study workers' job satisfaction and the factors that affect job satisfaction. In addition to variables related to corporate competitiveness and organizational justice, this study introduced variables such as environmental(E) activities, social(S) activities, and governance(G) activities, which th national government uses as major management evaluation indicators. Therefore, a literature study and empirical analysis were conducted on how self-efficacy affects job satisfaction when workers are faced with a changed work environment. To conduct this study, 300 copies of data were collected from workers in small and medium-sized enterprises and used for analysis. For data analysis, the SPSS statistical program (Ver. 25.0) was used. The study finds, first, that product or service quality and employee competency among corporate competitiveness had a significant positive(+) effect on job satisfaction. Secondly, among ESG management activities, social(S) activities and governance(G) activities were found to have a significant positive(+) effect on job satisfaction. Third, among organizational justice, distribution justice and procedural justice were found to have a positive(+) effect on job satisfaction. Fourth, self-efficacy was found to mediate the effect of product or service quality, employee competency, social(S) and governance(G) activities among ESG management activities, and procedural justice among organizational justice on job satisfaction. The academic value of this study is that it empirically analyzed the factors that ESG management activities affect workers' jobs,. As a result, it was confirmed that workers were satisfied with their jobs by actively showing interest in social(S) activities and governance(G) activities among ESG management activities and participating in corporate management. In addition, workers sensitive to changes in the external environment can become satisfied with their jobs through self-efficacy when SMEs actively enhance corporate competitiveness, execute ESG management activities, and provide a fair organizational culture. Finally, this study suggests that there's a possibility of improving the competitiveness of SMEs through a virtuous cycle created by a change in perception of job conversion and a decrease in turnover.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.203-212
• /
• 2024

The purpose of this study is to examine the validity of Hidden Stems (支藏干) in the Four Pillars of Destiny with regard to the use of human governance periods in the hidden stems (人元用事). First, there is a theory of assigning period of governance for designated constituents (司令論) in the Hidden Stems of the Earthly Branch. Second, there is a theory that determines the structure of the Four Pillars by the Exposed Constituent from the Hidden Stems (透出論) in the Month Earthly Branch. Since these two theories conflict with each other and cause confusions, this study examined the theory of Hidden Stems in the Four Pillars Classics and examined the historical development of governance period for constituent hidden stems and their validity. The results of the study are as follows: Firstly, the number of dates assigned to respective constituents does not correspond to the calendarical principle, and the assignment of the governance dates for each constituent does not correspond to the principles proposed in ancient books of Four Pillars. Second, though it is said in the Classics that 72 days are equally assigned to each of the Five Elements, actual distributed days for the five elements was 65 days for Wood, 55 days for Fire, 100 days for Earth, 65 days for Metal, and 65 days for Water. Third, though it is said that 7 days should be designated to Yang Earth Mu for the months of Tiger 寅, Monkey, Snake, and Pig, it is logically more legitimate to assign those days to Yin Earth Ki since the month before Tiger is Ox, and the month before Monkey is Goat. Lastly, rationale behind assigning Ki Earth only to Horse Oh as constituting Hidden Stem while disregarding months of Rat, Rabbit, and Rooster is considered not reasonable. Looking at these results comprehensively, it is concluded that the Exposed Constituent theory is logically more appropriate than Assigned Governance theory.