• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.175.2-175.2
• /
• 2011

바이오디젤의 국가별 의무 사용 정책 확대로 인해 원료유 가격이 상승하고 있으며 원료유가 부족한 상황으로 다양한 원료를 찾는 연구가 진행되고 있다. 육상 유지 작물보다 단위면적당 생산성이 매우 높은 미세조류는 제3세대 바이오매스로 주목받고 있으며 산업체 배출 이산화탄소를 이용해 작은 면적에서 배양할 수 있는 장점이 있다. 미세조류로부터 바이오디젤 생산은 먼저 오일 함량이 높은 미세조류 종의 선정과 배양 및 수확 후 효율적인 방법으로 바이오디젤 원료유를 추출하는 과정이 중요하다. 본 연구는 Microwave로 전처리된 미세조류로 부터 원료유를 추출하여, 인지질, 단백질, 엽록소 등의 반응저해 물질을 일부 감소시키고 추출수율을 높였지만, 산가가 80이상으로 높게 추출되고 추출된 오일이 높은 점성을 가지는 문제가 있다. 이로 인해 전이에스테르화 반응의 진행이 불가하였으며 이러한 문제를 해결하기 위해, 에스테르화 반응에 용매를 혼합하여 반응성을 개선하고자 하였다. 추가된 보조 용매는 오일과 쉽게 혼합되어 반응물의 점성을 낮추고, 반응 완료후, 물에 쉽게 용해되는 불순물, 미 반응물, 촉매 등의 분리 및 제거를 용이하게 하는 장점이 있다. 또한 오일과 비교하여 낮은 끓는점을 갖는 용매는 증류를 통해 쉽게 제거가 가능하다. 반응이 완료된 오일은 초기산가 80에서 10이하의 감소를 나타내 용매 혼합 에스테르화의 효율적인 부분을 확인하였다.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.254-260
• /
• 2015

The effect of the extraction solvent on the physiological properties of the peel of the Korean pear (Pyrus pyrifolia cv. Niitaka) was evaluated. The total phenol content was highest in the 80%(wt) methanol extract, whereas flavonoid content was highest in the 80% ethanol extract. The antioxidant activities of the extracts were evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging abilities, and their reducing power. The water and 80% methanol extracts of the pear peel had highest DPPH and ABTS radical scavenging activities, and reducing power, respectively. The inhibition of ${\alpha}$-glucosidase was highest in the 80% methanol extract, and alcohol dehydrogenase activity was highest in the water extract. All three extracts had similar antimicrobial activity. Because water, 80% ethanol, and 80% methanol extracts exhibited high activities in different assays of physiological properties, each solvent could be used for specific purposes.

• Membrane Journal
• /
• v.29 no.2
• /
• pp.105-110
• /
• 2019

Porous membranes are widely used in industry for removing particulate matter. Unlike conventional porous membrane fabrication methods, the solution spreading phase separation method can form pores very simply. The first step is to wet the mesh with the support layer, then to let the polysulfone solution flow into a solvent without water. The solvent is readily vaporized and the polysulfone is made into a thin film. When the polysulfone solution is mixed with water to form pores, the pore size can be adjusted according to the concentration ratio of the polysulfone solution. The thickness of the membrane is easily controlled by the concentration of the solution. The porous separator has the formation of meshes intact and is very useful for forming a three-dimensional structure. The solution spreading phase separation method proposed in this study is characterized by its high cost competitiveness compared with conventional membranes due to its low production cost and easy process control.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.915-921
• /
• 2007

As a preliminary measurement of siloxanes in landfill gas(LFG), this study was conducted to determine the best suitable solvent applicable to the extraction of siloxanes in the domestic landfill using liquid-absorption method. Three solvents of n-hexane, acetone, and methanol were tested and the results obtained from GC analysis for each solvent were compared to their properties. Results showed that the resolution in the GC spectrum was the best from methanol due to the lack of overlapping of the peaks between silane and solvent. The detected siloxanes concentration were varied at maximum 2.6 times depending on the types of solvent as well as extraction velocity and impinger steps. In total, the highest concentration of siloxanes was obtained from methanol, which showed ideal pattern in the absorption of each impinger step and the least relative standard deviation. Accordingly, it is concluded that methanol is the most suitable solvent for the extraction of siloxanes in the domestic landfill. However, it is considered that solvent suitability can vary depending on the waste components and landfill record in landfills.

• Clean Technology
• /
• v.13 no.4
• /
• pp.274-280
• /
• 2007

A liquid-liquid solvent extraction process was developed in this study to recover Fe and Ni from heavily concentrated aqueous ferric chloride solution, in an effort to substitute the conventional iron reduction method. Solvent composition and extraction conditions were first developed from the laboratory experiments, and the pilot system was designed and built for commercialization. Stage numbers for extraction and stripping were determined from pilot plant runs, and other operation data were obtained for mass production.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.408-411
• /
• 2003

By reversed-phase high-performance liquid chromatography, the extraction and separation of glabridin by from licoricce root was performed in this work. The column efficiencies and resolutions of glabridin were investigated with mobile phase composition on the reversed-phase chromatographic system. The glabridin collected from licorice root was identified by LC/MS. The mobile phase used to extract glabridin were composed of ethanol, methanol, acetone, and ethyl acetate. For one-hour ultrasonic extraction with solvent of ethyl acetate, the favorable content of glabridin was obtained as 1.26g/kg. The glabridin was well separated in the mobile phase composition of 50/50 vol. % (acetonitrile/water).

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.21-26
• /
• 1996

Commercially available Chines oriental lacquer was treated to get two fractions, hexane soluble fraction and hexane insoluble fraction. Hexane soluble fraction was subjected to thermal curing process. Films obtained from the lacquer under normal conditions and obtained from thermal curing were compared. The compounds in hexane soluble fraction were copolymerized with 1,6-diisocyanohexane, and toluendiisocyanate(TDI). Films obtained by thermal curing were highly brittle and hydrophobic while the films obtained under normal conditions were hydrophilic. Curing reaction did not occur when oxygen was not available.Some of the major component in the lacquer was isolated by HPLC and UV spectrum of each compound was recorded.

• The Korean Journal of Food And Nutrition
• /
• v.1 no.2
• /
• pp.18-24
• /
• 1988

이온교환 크로마토그라피와 젤 여과법으로 연어알에서 carotenoprotein을 충분히 정제하였다. CHCls/MeOH (211)용매로 지질 성분을 추출한 후, Sephadex G-25로 정제하고 silicic acid 컬럼으로 분획하여 중성지질, 당지질, 인지질 그리고 콜레스테롤의 량을 각각 정량하였다. T.L.C.와 HPLC로 개별 성분을 분리, 정량한 결과 중성지질은 tripalmitate와 cholesteryl oleate로 구성되었고, 당지질은 esterified steryglycoside와 소량의 cerebroside, 인지질은 p.c, co, lp.c 및 p.e로 구성 되었음을 밝혔다. 결합당 성분으로서는 galactose만이 검출되었다. 지방산은 palmitate와 oleate가 대부분이었으며, 6종류의 sterol성분을 분리 확인하였다. 지질과 결합된 단백질의 아미노산도 분석하여 이들로부터 carotenoprotein의 본성을 추론하였다.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.57-63
• /
• 2016

Thermally induced phase separation (TIPS) and nonsolvent induced phase separation (NIPS) were simultaneously induced for the preparation of flat PVDF membranes. N-methyl-2-pyrrolidone (NMP) was used as a solvent and dibutyl-phthlate (DBP) was used as a diluent for PVDF. When PVDF was melt blended with NMP and DBP, crystallization temperature was lowered for TIPS and unstable region was expanded for NIPS. Ratio of solvent to diluent changed the phase separation mechanism to obtain the various membrane structures. Contact mode of dope solution with nonsolvent determined the dominant phase separation behavior. Since heat transfer rate was greater than mass transfer rate, surface structure was formed by NIPS and inner structure was by TIPS. Quenching temperature of dope solution also affected the phase separation mechanism and phase separation rate to result in the variation of structure.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.579-587
• /
• 2005

Phase separations of Poly(4-vinylphenol)(PVPh)/acetone and PVPh/methyl ethyl ketone solutions were measured using the thermal optical analysis (TOA) method. The phase separations of these system showed the behaviors of LCST-type (lower critical solution temperature). The measured cloud temperatures were lowered with increasing molecular weight of PVPh, and cloud temperatures of PVPh/MEK solutions shifted to higher temperature regions, compared to the PVPh/acetone solutions. Phase equilibria of PVPh/ketone solutions were described with taking account of self-associations of PVPh and cross-associations between PVPh and solvent, by using the PC-SAFT equation of state. PC-SAFT EoS parameters of PVPh and cross-association parameters were determined by simultaneously fitting liquid density data of PVPh and VLE data of the PVPh/acetone system. The estimated parameters of PVPh and cross-association parameters were utilized to calculations of the binodal and spinodal curves, and the calculated binodal curves were in good agreements with the experimental cloud temperatures.