• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.16-28
• /
• 2005

최근 컴퓨터비전 기술을 이용하는 새로운 패러다임의 마커프리 모션캡처 기술이 미국의 MIT, CMU, MS, 일본의 ATR, MERL, 영국의 Oxford 대학 등에서 개발되고 있다. 마커프리 모션캡처는 연기자의 몸에 마커나 센서를 부착하지 않으며 특별한 조명이 필요 없으므로, 애니메이션 제작뿐만 아니라 일반인을 대상으로 하는 동작 인터페이스분야로의 확대 적용이 가능한 모션캡처 방식이다. ETRI에서는 여러 응용 분야에 모션인터페이스로 활용할 수 있는 환경 변화에 강인한 마커프리 모션캡처 시스템을 개발하고 있다. 몸에 마커나 센서를 부착하지 않은 자유 복장 상태의 동작자에 대해 조명 조건 변화 및 배경 변화에 강건하게 실시간 모션캡처 할 수 있는 기술 개발을 목표로 한다. 본 연구 개발이 성공한다면, 2007년에 876억 달러 규모로 확대될 전망인 영화, 방송물, 게임 등을 포함한 세계 영상 콘텐츠 시장에서 핵심 요소 기술 역할을 할 것이다. 그리고, 차세대 3D OS에서는 직관적 3D 포인팅 수단으로 활용될 수 있을 것이며, 2004년에 18,600만 대가 출고된 PC 시장을 고려하면 폭발적 수요가 예측된다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.49-52
• /
• 2009

3상 전압의 크기가 일정하고, 위상차도 $120^{\circ}$인 전압이 부하에 공급되는 것이 가장 바람직하지만, 부하의 운전조건과 설계에 따라 부하 단자에서의 3상에서는 균등한 전압이 되지 않는 경우가 많은 편이다. 이와 같은 전압 불평형이 존재할 경우 전류 불평형으로 이어져 기기의 출력저하나 부하에 졸지 않은 결과를 낳게 된다. 커패시터는 역률 보상으로도 사용되며, 비선형 부하에서 발생하는 고조파를 저감하기 위해 리액터와 함께 사용되기도 한다. 커패시터에 리액터를 부착하여 사용하는 경우 사고 발생이 높은 편이다. 그래서 커패시터 설비에 전압 불평형이 존재할 경우 전압, 전류 그리고 용량의 변화가 어떻게 진행되는지 확인하는 것이 매우 중요하다. 본 연구에서는 전압 불평형율이 존재할 경우 커패시터 단독운전과 리액터의 부착시 전압, 전류 및 용량의 크기가 규정에서 제시한 범위이내 인지를 계산하였다.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.141-150
• /
• 1993

콘크리트내에 짧은 길이를 갖고 임의의 방향으로 배향된 강섬유는 콘크리트가 인장응력을 받을 때 일반콘크리트에 비하여 인장강도와 연성을 증가시키며 이는 콘크리트모체내 강섬유의 균열억제메카니즘에 기인한다. 본연구에서는 기존의 각기다른 spacing 개념들에 의하여 SFRC의 인장강도를 예측하고 정확한도를 실험치와 비교하여 평가하였는데 시험체의 경계조건 및 타설시의 진동으로 인한 콘크리트내 강섬유의 재향성을 고려한 단위면적당 섬유수(N1)개념이 실행결과와 가장 좋은 상관관계를 나타내었다. 또한 SFRC의 강도후 영역에 대한 이론적인 해석이 고려되었으며 본 해석은 시험체의 경계조건, 진동효과, 콘크리트모체와 강섬유의 강섬유의 접촉면의 비선형부착특성 고려 및 특히 위험단면에서 매입길이가 다른 각 강섬유의 적합조건을 고려하였다.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1978.10a
• /
• pp.206.3-206
• /
• 1978

태국으로부터 발효원료 수입된 Tapioca chips에 부착된 사상균과 곡자, 공기, 식물의 잎으로부터 적색색소를 생산하는 미생물을 분리하여 그 배양조건을 검토하였다. 분리한 균수는 Eumycetes중 균사에 septa를 가지는 Ascomycetes과의 Monascus sp.로 동정되었다. 최적 적색색소 생산의 배지조성분은 탄소원으로 Tapioca chips powder 3.5%, 질소원으로 $NaNO_3$ 0.2%, amino acid 중 L-arginine, L-glutamic acid, L-proline 0.3%, vitamin 중 folic acid, niacin 1 $\mu\textrm{g}$/mι. 무기염류로 $MnO_2$ 0.001% 첨가가 효과적이었고 배양온도 $32~33^{\circ}C,$ pH 6.5, 배양기간 4일, 배지용량 100/500mι, 진탕배양(180rpm)의 조건하에서 적색색소 생산이 잘 되었다.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.50-59
• /
• 2005

This paper described performance test of 1st prototype "Tail-Fan" system. KARI(Korea Aerospace Research Institute) developed "Tail-Fan" system as a kind of helicopter anti-torque system(ATS) and designed ATS performance test-rig for Tail-Fan system performance test. For Tail-Fan system performance tests, firstly, test-rig operation tests were carried out for verification of design specifications. And natural frequencies of fan blade and test-rig were measured respectively. To find the operation rotating speed for performance tests, vibration tests using accelerometers on tail gear box(TGB) were carried out. Through the fanplot and vibration test results, rotational speed for Tail-Fan performance test to avoid a resonance were found and performance tests were carried out in flight conditions. We analyzed test data by non-dimensionalization. Through this results, 1st prototype "Tail-Fan" system was satisfied with design requirements.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.17-25
• /
• 2005

The bender element method is an experimental technique to determine very small strain ($<10^{-3}\%$), elastic shear modulus of a soil, $G_{max}$ by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure small strain modulus of wet or dry soils in various laboratory apparatus. In this paper, bender element (BE), resonant column (RC) and torsional shear (TS) tests were performed on Toyoura sand at various testing conditions using the modified Stokoe type RC/TS testing equipment capable of performing BE test. Based on the results, applicabilities of the testing method using bender element were evaluated by comparing the values of $G_{max}$ obtained from RC/TS and BE testing methods. For more dependable evaluation, the loading frequency of each testing method was considered for the results obtained for samples in saturated condition by adapting Biot's theory.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.633-639
• /
• 2007

This study proposes an optimal condition to recognize a train using RFID. In order to recognize a moving train, bandwidth, an angle of antenna and the location of a tag should be considered. In this study, a field test was conducted using two different bandwidths (900MHz and 2.45GHz), four angles of antenna(0, 30, 45, and $60^{\circ}$), different velocities (10, 30 and 50km), and three different locations of tags. The field test verified the optimal condition for recognition of a train, The present study convinced that location detection and tracking of rail freight can be monitored in real time. The present technology can be applied to railway signals including detecting and tracking such as EURO Balis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.923-930
• /
• 2012

The wall heat transfer of backward-facing step laminar flows with different Prandtl numbers and a pulsating inlet is investigated by unsteady simulations. The inlet is perturbed by the variation of frequency and amplitude. Temperature-dependent transport properties are adopted. Various characteristics of the wall heat transfer are explained by the variation of the thermal boundary layer. For Pr < 1, the wall heat transfer of temperature-dependent properties is decreased compared to that of constant properties, whereas it increases for Pr < 1. In addition, the wall heat transfer increases depending on the pulsating amplitude. However, the results of frequency variation for St < 0.2 show that the heat transfer is strongly enhanced at a specific frequency. In particular, the increase in the wall heat transfer is strongly related to the root mean square of the fluctuations of the reattachment length.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.319-327
• /
• 2020

Particulate matters (PM) are small particulate pollution that decrease the function of skin barrier, which causes inflammatory skin diseases and extrinsic aging. In this study, we evaluated the effect of preventing the adherence of PMs from several cosmetic products applied to human skin using iron oxide black. The PM floating chamber consists of skin exposure area, PM inlet, floating power device, and an outlet so that PM can be naturally attached to the skin while floating in the chamber. The change in skin brightness according to the floating concentration of alternative fine dust was checked to confirm the optimal floating concentration conditions. The intensity difference (before-after intensity, Δ) before and after adhesion of iron oxide black was proportional to the amount of PM adhered. The anti-adherence effect of iron oxide black on five cosmetic products were evaluated through 20 each subjects by comparing the amount of iron oxide black adhered on the control and treatment. The difference in brightness before and after the iron oxide black attached to the skin was calculated and compared with the control group(p < 0.05). When over 150 mg of iron oxide black was adhered on the skin, the interference of intensity was low and clearly showed the skin adhered pattern. According to the application of the five cosmetics, the intensity difference was significantly lower than the control group. This means that depending on the product, it prevented the attachment of iron oxide black. This study is a safe and useful method to confirm the prevention of PM skin adherence. In conclusion, cosmetics can prevent the adherence of PM on the skin according to the formulation or ingredients characteristics.