• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.246-255
• /
• 2007

The floating image system (FIS) is a device to display input source in the space between fast surface of the display and an observer and it provides pseudo 3D depth to an observer when input source as real object or 2D image was displayed through the optical lens system in the FIS. The Advanced floating image system (AFIS) was designed to give more effective 3D depth than existing FIS by adding front and rear depth cues to the displayed stereogram, which it was used as input source. The magnitude of disparity and size of stereogram were strongly related each other and they have been optimized for presenting 3D depths in a non-optical lens systems. Thus, if they were used in optical lens system, they will have reduced or magnified parameters, leading to problem such as providing incorrect 3D depth cues to an observer. Although the size of stereogram and disparity were demagnified by total magnifying power of optical system, the viewing distance (VD) from the display to an observer and base distance (BD) for the gap between the eyes were fixed. For this reason, the quantity of disparity in displayed stereogram through the existing FIS has not kept the magnifying power to the total optical system. Therefore, we proposed the methods to provide correct 3D depth to an observer by compensating quantity of disparity in stereogram which was satisfied to keep total magnifying power of optical lenses system by AFIS. Consequently, the AFIS provides a good floating depth (pseudo 3D) with correct front and rear 3D depth cues to an observer.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.142-145
• /
• 2019

Normally, a corner cube retroreflector (CCRR) sheet is used as a retroreflective mirror array (RRMA) in a volumetric display. Each CCRR unit reflects light in the retroreflective direction, which is parallel to the incident light, and it makes a blurred image, as it shifts the position of light within its dimensions. Adopting a "curved planar wall" and "parabolic focusing" (x-axis), a hybrid-t(transverse direction)-RRMA is proposed, to improve the image quality and brightness. The improvement of image contrast is achieved by tuning a "linear v-shaped groove" structure to a "parabolic v-shaped groove". Also, the system has been simplified and the brightness enhanced 4 times by removing the half mirror.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.540-545
• /
• 2016

Many golf balls have wrong rotation axis owing to bad production and scratch. A flying golf ball makes sliced or curved motion mainly to owing the wrong rotation axis of golf ball. Dimples of golf ball make a golf ball higher and more straight flying. When we hit a golf ball by driver or iron club, the dimpled ball flies straight and rotates as well. While the ball flying, the rotating axis of the ball convergence. And this makes the ball motion curved. If we hit a golf ball in direction of the rotation axis, the flying ball makes straight motion. In this paper, we develop a control system to detect convergence axis and time of flying golf ball based on vision system. To show validity of the developed system, We experimented several case for dimpled golf balls.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.54-62
• /
• 2021

This study has investigated the 3-D deflection characteristics of a flexible plate levitated by non-contact grippers using SPIV method. The measuring instrument consisted of a flexible plate located under four non-contact grippers and two cameras at the bottom of a transparent acrylic plate. Measurements were made on two materials (PVC and PC) for the plate with 50×50 cm2 area and 1 mm thickness. The deflection characteristics and flatness vary depending on the plate material, the gripper position and the air flow supplied to the gripper. For the material of PVC, the overall defection is convex. As the gripper position goes outward from the plate center, the upmost bending point also moves to the outside of the plate with the flatness increasing. However, the air flow rate does not affect the deflection pattern except for the small increase of flatness. For the material of PC, the shape of deflection changes from convex to concave as the gripper position goes out. The flatness is the highest at the point of transition from convex to concave, but the air flowrate has little effect on the flatness.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.237-244
• /
• 2013

Supermultiview and electro-holographic displays are promising displays for the future because they provide continuous parallaxes as their depth cue. But they are still in the early development stage due to the lack of supporting technologies. Achieving the continuous parallax in the supermultiview relies more on the number and size of pixels in the pixel cell/elemental image rather than the number of different view images. For the electro-holographic display, it also relies on the number and size of pixels in the panel. So these two methods share the same requirements for achieving the parallax. But the image displayed on the holographic display provides more impressive visual appeal than that on the supermultiview because the image can be floated on the front space of the display.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.264-274
• /
• 2020

The Ro-Ro ferry ship capsized and sank to the bottom of the sea because of the rapid turning for several reasons, such as lack of stability due to the center of gravity rise from the extension and rebuilding of the stern cabin, excessive cargo loading, and shortage ballast, poor lashing, etc. The purpose of this study was to investigate and analyze the cause of the ship's rapid flooding, capsizing, and sinking accident according to rapid turning scientifically and accurately using the Fluid-Structure Interaction( FSI) analysis technique. Several tests were conducted for this cause investigation of the flooding and sinking accident correctly and objectively, such as the realization of the accurate ship posture tracks according to the accident time using several accident movies and photos, the validation of cargo moving track, and sea water inflow amount through the exterior openings and interior paths compared with the ship's posture according to the accident time using the floating simulation and hydrostatic characteristics program calculation, and the performance of a full-scale ship flooding·sinking simulation.

• Journal of Digital Convergence
• /
• v.15 no.9
• /
• pp.301-309
• /
• 2017

The purpose of this study was to explore family caregiver's need for online education for dementia caregiving. Participants in this study were 220 family caregivers from district dementia centers in Seoul. Family caregiver's usability and needs of online education program were assessed using self-administered questionnaires. Descriptive statistics and t-test comparisons were conducted. About 50% of family caregivers answered they could use and have intention to use online education. The results showed that there were the highest demand for the video lectures which give information about dementia and case video about caregiving skills. There were differences in needs of online program according to the gender and age. The use of online program offers users the opportunity to participate support program at their own time and pace. In order to maximize the effects of online support programs, it is important to establish the strategies of the customized programs considering the characteristics of the caregivers.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.3
• /
• pp.1-18
• /
• 2010

The purpose of this study was to develop a teaching-learning process plan for sustainable residing creating with neighbors and to apply it to the housing section of Technology-Home Economics according to the 2007 Revised Curriculum. Teachinglearning method solving practical problems was used for the teaching-learning process plans of 6-session lessons according to the ADDIE model. In the development stage, 17 activity materials and 15 teaching learning materials (6 reading texts, 6 moving pictures, 2 internet and 1 image materials) were developed. for the 6-session lessons, based on the stages of solving practical problems. The plans applied to the 3 classes of 8, 9, and 10th grade of the H. junior and senior high school in Myun district in Kyungbook during Sept. 1st to 14th, 2009. The results showed that students actively participated when the contents and materials were related to their own experience. The 6-session lessons about sustainable residing creating with neighbors was significantly increased the sense of community between before and after. Each of the 4 stages of the teachinglearning method solving practical problems were highly participated by the students. The satisfaction with the contents and methods of the 6-session lessons were evaluated over medium to somewhat higher levels. The practical activities to solve the community space and programs were got positive comments. Problem solving process and presentation and discussion were needed to learn more. Those results might support that the teachinglearning process plan this research developed. would be appropriate to the lessons for sustainable residing creating with neighbors.