• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.243-248
• /
• 2019

The respiratory tract is an essential part of the respiratory system involved in the process of respiration. However, if stenosis occurs, it interferes with breathing and can even lead to death. Asthma is a typical example of a reversible cause of airway narrowing, and the number of patients suffering from acute exacerbation is steadily increasing. Therefore, it is important to detect airway narrowing early and prevent the patient's condition from worsening. Optical coherence tomography (OCT), which has high resolution, is suitable for observing the microstructure of tissues. In this study we developed an endoscopic OCT system. We combined a 1300-nm OCT system with a servo motor, which can rotate at a high speed. A catheter was pulled back using a linear stage while imaging with 360° rotation by the motor. The motor was selected considering various requirements, such as torque, rotational speed, and gear ratio of pulleys. An ex vivo rabbit tracheal model was used as a sample, and the sample and catheter were immobilized by acrylic structures. The OCT images provided information about the structures of the mucosa and submucosa. The difference between normal and stenosed parts in the trachea was confirmed by OCT. Furthermore, through a three-dimensional (3-D) reconstruction process, it was possible to identify and diagnose the stenosis in the 3-D image of the airway, as well as the cross-sectional image. This study would be useful not only for diagnosing airway stenosis, but also for realizing 3-D imaging.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.965-970
• /
• 2010

Bolts and nuts are widely used to fasten mechanical parts together in machines and structures. The primary role of a nut is to maintain the axial force of a bolt. In this paper, a new type of a lock nut that uses a spring is studied. To have a spring within a nut, a cocking process to narrow the top of the nut is adopted, but cracking occurred in the process. In this study, strain of an initial model is measured using the finite element analysis program, MSC/Marc. The occurrence of the crack was studied by comparing the maximum observed strain of a model with the maximum strain indicated by an accurate stress-strain diagram of 1020 steel. Then, the structure of the lock nut was optimized by response surface analysis to prevent cracking. The prototype of the lock nut was manufactured on the basis of the optimization result, and cracking did not occur.

• Journal of the Speleological Society of Korea
• /
• no.67
• /
• pp.1-9
• /
• 2005

The lava-calcification which was found in Geunjisul located in Jeju-do (Korea) was investigated to analyse the cause of calcification through the internal factor of cave structure and surroundings in company with relevant ecological system. The volcanic cave is degenerated after formation from volcano lava extravasation, however, the cave became more stronger with solidification and petrification by the reinforced structure of calcification as the cement in concrete buildings unprecedentedly if the lava-calcification occurred in the cave. Such a Progressive Phenomena of lava-calcification was verified in progress first in Geonjigul located at Hyubjae-ri, but those would be found in other simiiar case of caves distributed and connected with seaside of shelly sand beach.

• Parasites, Hosts and Diseases
• /
• v.33 no.3
• /
• pp.155-164
• /
• 1995

The location of actin and myosin of the several stages of Cwptosporinium parvum was observed. The tissue antigen of C. pcruum was prepared through immunosuppression of IgG mice with Depomedrol . The thin sectioned specimens, which were incubated with the IgG fraction of the rabbit polyclonal antibodies raised against chicken back muscle actin and bovine uterus myosin, were treated with 10 nm gold-conjugated goat anti-rabbit IgG, Electrodense particles were located mainly on the pellicles of all observed developmental stages of the parasites. The number of actin gold particles in the cytoplasm increased when the parasite was dividing actively as in case of meronts. Especially in macrogametocytes, a lot of actin and myosin particles were synthesized and storaged as amilopectin-like bodies. There were many actin gold particles along the microspikes of cytoplasmic membranes in various developmental stages. The actin and myosin observed in this study may play important roles to control the shape of the parasites and movement of cytoplasmic membranes as cvtoskeletal proteins.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.153-153
• /
• 2011

현대 건축은 기능적이고 합리적이었지만 획일적이었던 박스형 건축에서 탈피해 형태와 공간에 있어서 다양한 변화를 시도하고 있다. 특별한 건축물의 실현을 위해 각 나라의 기술력은 급속한 발전을 이루었고, 보다 더 독특한 건축물에 대한 관심은 비정형 건축물에 대한 관심의 증대로 이어지고 있다. 이러한 비정형 건축물에 적합한 구조로써 프리폼(Free-Form) 구조가 있다. 프리폼 구조로 입체골조(Double Layered Structure)를 많이 사용하였으나, 최근 유리로 되어 투명하고 기하학적 모양의 건축물을 추구함에 따라 평면골조(Single Layered Structure)가 증가하고 있는 추세이다. 평면골조는 축력 지배형과 모멘트 지배형으로 분류할 수 있고 프리폼 구조의 구성 요소 중 가장 취약하고 중요한 부분은 노드이다. 본 연구에서는 프리폼 구조 중 가장 큰 관심이 고조되고 있는 평면골조 모멘트 지배형의 노드에 대한 국내외 기술 분석을 통해 향후 연구 방향성을 제시하고자 한다. 입체골조는 하나의 노드에 여러개의 부재가 3차원으로 결합되어야 하기 때문에 다른 골조 시스템에 비해 노드부가 복잡하지만, 건축물의 외관을 유리로 하여 투명하게 하고 비틀리고 구부러진 구조물에 대한 건축적 요구가 많아짐에 따라 평면골조의 인기가 높아지고 있다. 이러한 시대의 흐름에 발맞추어 건물의 구조적, 기하학적 요구를 충족시키기 위해 다양한 노드 시스템이 개발 중이며, 가해지는 하중의 특성에 따라 축력 지배형과 모멘트 지배형으로 구분하여 노드의 양상을 분류할 수 있다. 축력 지배형의 대표적인 시스템은 다이아그리드(Diagrid)이다. 축력 지배형 프리폼 구조의 노드는 전체 구조물의 하중을 축력으로 받아 모두 전달해야 하기 때문에 크기가 크고 가새가 2~4개층에 걸쳐서 설치되기 때문에 중량이다. 모멘트 지배형 노드를 갖는 프리폼 구조의 형태는 대부분 지붕 구조로써 지붕 자체의 하중만을 견디도록 설계된다. 따라서 노드부와 노드에 붙는 부재들이 가볍기 때문에 사람이 들 수 있고 노드의 크기가 작아 시공성이 좋으며 대량 생산이 가능하다는 장점이 있다. 노드의 형태는 힘의 흐름과 쓰임에 따라 다양하다. 평면골조 모멘트 지배형의 노드는 접합방식에 따라 Splice node connection과 End-Face node connection 두 가지로 분류할 수 있다. Splice node connection은 각 부재의 종축으로 노드와 구조부재 사이에 이음재를 두어 연결하고, 연결 형태에 따라 전단력을 전달할 수 있는 1~2개의 접촉면이 생긴다. 전단응력을 받는 볼트로 이음재를 이어 조립하거나 용접으로 접합할 수 있다. 대표 노드로, SBP-1, SBP-2와 POLO-1 등이 있다. End-Face node connection은 각 연결된 부재의 단부와 노드 사이의 연결면은 종축방향의 수직이고, 인장응력을 받는 볼트를 사용하거나 용접에 의해 접합할 수 있다. 대표 노드로 SBP-4, WABI-1, MERO-1(Cylinder), MERO-2(Block), MERO-4(Double Dish) 등이 있다. 본 기술 현황 분석을 통해 현재 개발된 노드를 분류하고 가장 관심이 높은 Single Layer 모멘트 지배형 노드를 비교, 분석하였다. 최근 건물의 경향을 반영한 프리폼 구조를 실현하기 위해서 필수적인 노드의 개발은 국외에서 활발히 연구되고 있지만 그 기술이 개방되어 있지 않다. 국내에서는 동대문 디자인 플라자에 새로운 노드를 적용하고 고려대학교에서 모멘트 지배형 노드를 개발하는 등 발전 가능성을 보이고 있지만 국외 사례들에 비하면 아직 초기 단계라 할 수 있다. 따라서 현장 용접을 지양하고 공장 제작하여 현장에서 조립하며, 프로젝트 별로 상이한 노드를 사용하는 것이 아닌 다양한 요구를 효과적으로 수용하는 구조 효율성을 향상시킨 노드 상세의 개발이 이루어져야 할 것이다.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.131-138
• /
• 2019

Recently, there are many structures exposed to severe outdoor environments, which results in rapid degradation of durability of the concrete structures. there can be rapid deterioration of the concrete structures from early frost damage due to the insufficient curing in low outdoor temperature condition. The objective of this study is to investigate the effect of thickness change conditions and binding material on early frost damage depth of the concrete exposed to cold weather in winter, and is to clearly assess damage depth of the concrete structure due to early frost damage. Specimens with 300x300x(150, 200, 250, 300mm) were prepared. OPC and OPC+FA+BS were adopted for binders. Test results indicate that the depth of the early frost damage was deeper with the decrease of thickness of members. The brightness of specimens were reduced when the member thickness was thinner. When determining the depth of early frost damage, it can be distinguished into dark color and relatively bright color when dried for approximately 30 minutes in the indoors of $20^{\circ}C$ in temperature and 60% in relative humidity after submerging in water for 24 hours. The dark colored part can be determined easily when measured with vernier calipers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2023

An artificial intelligence (AI) method based on image deep learning is proposed to predict the entire displacement shape of a structure using the feature of partial displacements. The performance of the method was investigated through a structural test of a steel frame. An image-to-image regression (I2IR) training method was developed based on the U-Net layer for image recognition. In the I2IR method, the U-Net is modified to generate images of entire displacement shapes when images of partial displacement shapes of structures are input to the AI network. Furthermore, the training of displacements combined with the location feature was developed so that nodal displacement values with corresponding nodal coordinates could be used in AI training. The proposed training methods can consider correlations between nodal displacements in 3D space, and the accuracy of displacement predictions is improved compared with artificial neural network training methods. Displacements of the steel frame were predicted during the structural tests using the proposed methods and compared with 3D scanning data of displacement shapes. The results show that the proposed AI prediction properly follows the measured displacements using 3D scanning.

• Journal of the Korean Society of Radiology
• /
• v.83 no.3
• /
• pp.538-558
• /
• 2022

The perivascular space (PVS) of the brain, also known as Virchow-Robin space, consists of cerebrospinal fluid and connective tissues bordered by astrocyte endfeet. The PVS, in a word, is the route over the arterioles, capillaries, and venules where the substances can move. Although the PVS was identified and described first in the literature approximately over 150 years ago, its importance has been highlighted recently after the function of the waste clearing system of the interstitial fluid and wastes was revealed. The PVS is known to be a microscopic structure detected using T2-weighted brain MRI as dot-like hyperintensity lesions when enlarged. Although until recently regarded as normal with no clinical consequence and ignored in many circumstances, several studies have argued the association of an enlarged PVS with neurodegenerative or other diseases. Many questions and unknown facts about this structure still exist; we can only assume that the normal PVS functions are crucial in keeping the brain healthy. In this review, we covered the history, anatomy, pathophysiology, and MRI findings of the PVS; finally, we briefly touched upon the recent trials to better visualize the PVS by providing a glimpse of the brain fluid dynamics and clinical importance of the PVS.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.75-82
• /
• 2007

The present work measured and analyzed changes in the acoustics of a sound field which has a retractable ceiling. An 1/20 scale model of an openable space was built and measurement was carried out by varying the opened area of a ceiling. The most widely used room acoustic and design parameters, RT, EDT, and D50 were investigated. The results suggest that the use of RT as an acoustic design parameter may not be proper in an openable space and further it is likely to mislead the initial acoustic design of such spaces. It is mainly due to the characteristics of RT in which non-exponential decay processes are linearly fitted. Early decay times were found to be decreased in proportion to increaing the ratio of opened area. D50, an index of speech intelligibility, was effectively shows the influence of openings on the acoustics. It is also found that EDT and D50 at the seats, not directly exposed to the opened part of a ceiling, were almost linearly decreased in proportion to the ratio of opened area, while little influence was found for the opening ratio larger than 40% at the directly exposed seats to the opened part of a ceiling.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.527-530
• /
• 2014

A 7-year-old neutered male Korean domestic short-haired cat was referred to our clinic to treat constipation which had persisted for 6 months. The rectal examination revealed narrowing of the right lateral portion of the pelvic canal. A reduced pelvic canal diameter by pelvic fracture malunion was revealed on radiography. The pelvic canal diameter ratio measured from preoperative was 0.68. Based on rectal and radiographic examinations, constipation caused by pelvic canal narrowing was confirmed. Pelvic symphyseal distraction-osteotomy and iliac wedge osteotomy were performed. An iliac osteotomy of the ilium was performed to ease the pelvic symphyseal distraction. After the symphysis was split longitudinally, pelvic symphyseal distraction was maintained by using a spacer made of poly-methyl-methacrylate. The osteotomy of the ilium was fixed using a bone plate and screws. Increased pelvic canal diameter was confirmed on post-operative radiography and the postoperative pelvic canal diameter ratio was 0.91. The patient received antibiotics, NSAIDs, crystalloids and Lactulose for post-operative care. The cat recovered normal defecation abilities and did not have constipation at one week postoperatively. No episodes of constipation persisting longer than 6 months have been reported by owners in previous studies. Pelvic symphyseal distraction osteotomy and iliac wedge osteotomy may prove to be a useful surgical procedure to treat pelvic canal stenosis that is caused by pelvic fracture malunion.