• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.413-417
• /
• 2007

노면배수 시설의 설계를 위하여 부등류 해석을 기반으로 한 설계모형을 수립하고 등류 해석을 기반으로 한 설계결과와 비교하였다. 노면배수시설을 설계하기 위해서는 지속시간을 가정하여 설계강우를 결정하고 설계변수인 유출구 간격을 가정하여, 호우에 응답하여 발생하는 홍수의 도달시간이 가정된 지속시간과 유사할 때까지 계산을 반복하여 유출구 간격을 결정한다. 부등류 해석에 의한 수로 흐름 해석은 수로 양단에 유출구를 갖는 수로의 분수계의 위치를 결정하는 과정과 발생하는 최대수심이 허용수심을 초과하지 않도록 수로길이를 산정하는 과정을 포함하므로 등류 해석에 비해 계산과정이 복잡하게 된다. 가상의 노면배수 체계를 설정하고 다양한 수로경사에 대해 노면배수 설계모형을 적용한 결과, 등류해석의 경우 유출구 간격은 수로경사가 증가할수록 증가하였지만, 부등류 해석의 경우 수로경사가 증가할수록 감소하였다가 다시 증가하는 경향을 보였다. 수로경사가 작은 경우 등류 해석보다 부등류 해석을 기반으로 노면배수 시설을 설계하는 것이 합리적인 것으로 판단되었다.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.245-250
• /
• 2014

This paper, as a study for the serviceability design of railway bridges with concrete track, presents the effects of design parameters of tracks and bridges on the forces acting on the rail supports of the track. To calculate the forces acting on the track, an unequal spacing discrete supported model with different spacing of rail supports was induced. Design parameters are the rail support spacing of expansion joints above abutments or piers of bridges, the distance from the support of a girder to the last rail support on the end of the girder, and the number of additional rail supports. The causes of the displacement of track are axial force, unit vertical displacement, and unit rotation. From the analysis, the maximum compressive force and the maximum uplifting force acting on the rail supports were determined and the effects of the rail support spacing on the forces acting on the track were presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1047-1054
• /
• 2000

A numerical simulation was made to delineate the re-distribution of tonal noise generated from the equally-spaced blade passing frequency (BPF). A pressure-wave model was employed to analyze the tonal noise. An optimal solution for diversifying the tonal peak noise was obtained by rearranging the unequally-spaced blade angles. This was based on the fact that the noise energy is transferred from BPF to the neighboring frequency band. A limit condition for the minimum blade angle spacing was imposed. The unbalancing problem was also considered to avoid the weight bias.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.655-661
• /
• 2000

Diesel power plant can be used as a power supplier for the isolated place where consumption of electric power is variable. The reason is that mobility and durability of diesel engine is superior to those of other thermal engines. However, there are some disadvantages for using these diesel engines such as bigger vibratory excitation force comparing to the others, which result from high combustion pressure of cylinders and inertia force of piston reciprocating masses. In this paper, control and optimization of torsional vibration of 12K90MC-S engine for diesel power plant using uneven crank angles is identified by theoretical analysis and vibration measurement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.19-36
• /
• 1991

The purpose of this paper is to calculate the excavation volume of unequal interval grid using nonlinear boundary in earthwork volume determination. The formulas by unmerical annlysis in this paper is compared with linear and nonlinear spot level method of unequal interval grid. As a result algorithm of derived formula by numerical analysis should provide a better accuracy than the linear and unlinear spot level method currently in use. Practical application of each method is illustrated by three model test.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1173-1185
• /
• 2008

The design methods of the road surface drainage facilities were compared for the improvement of design method. We have developed four computational design models classified by the methods to determine the duration of design rainfall and to analyze the flow of a linear drainage channel. The critical duration was determined by assuming the critical duration to be 10 minutes or by finding the duration of design storm being similar to the travel time of flow by trial and error. The flow of a linear drainage channel was analyzed as the uniform flow or the varied flow. The design models were applied to the artificial road surface drainage facilities with various channel slopes and road shoulder slopes. If the rainfall intensity of the 10 minutes duration was applied, the outlet spacing obtained from the design based on the varied flow analysis was larger than the uniform flow analysis only when the channel slope and the road shoulder slope was small. On the other hands, if the duration of design rainfall was determined by calculating the travel time, the varied flow analysis brought about larger outlet spacing than the uniform analysis for all conditions. However, the model of the critical duration concept and the varied flow analysis resulted in smaller outlet spacing than the current design method employing the rainfall of 10 minutes duration and the uniform flow analysis.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.133-138
• /
• 2011

This study aims to compare hydraulic & hydrologic design characteristics by examining generated on weak points for road drainage poor sites. More appropriated methodology of rainfall-intensity calculated is to consider minutely rainfall-intensity decision method for road drainage basins. To use non-uniform flow analysis methodology for road surface drainage facilities inlet spacing decision methods is better than present experience inlet spacing decision equations.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.65-74
• /
• 2013

The visual sensibility and preferences are closely related with color combinations, stripe intervals, and stripe complexity. We studied the effect of stripes characteristics on visual sensibility and preferences for men's shirts fabrics. As a result of a factor analysis, the adjectives were classified by viewers into 5 factors as attraction, maturity, dignity, practicality, and simplicity. We found that stripe intervals had a significant visual effect on maturity, dignity, and practicality. The uneven stripes had higher scores for dignity and practical while lower for mature. The stripes with consecutive order of two different thickness were felt more strongly in attractive, practical, and preferred. The results also showed that stripes with compound and contrast colors were attractive and preferred.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.67-72
• /
• 2012

Finite element method was used to compare un-piled and piled raft foundation behaviors on sandy soils in this study. The soil parameters were estimated from SPT tests of 25 boreholes. Based on these soil parameters, a finite element analysis was conducted on un-piled and piled raft foundations. For the un-piled raft, the normalized settlement parameter for raft sizes of $8m{\times}8m$ and $15m{\times}15m$ ranged from 1.02~1.15 and 0.64~0.81, respectively. The raft thickness affects differential settlement and bending moments, but has little effect on load sharing or maximum settlement. Pile spacing greatly affected the maximum settlement, the differential settlement, the bending moment in the raft, and the load shared by the piles, while the differential settlement, the maximum bending moment and the load sharing are not affected very much by increasing the pile lengths.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.61-70
• /
• 1995

The purpose of this paper is to calculate the excavation volume of unequal interval grid using nonlinear boundary in eathwork volume determination for reclamation of the foreshore. A congruence area formula by first and third equation is compared with trapezoidal, simpson formulas to earthwork volume. And nonlinear spot level method of unequal interval grid is compared with linear and nonlinear spot level method of equal interval grid excavation volume. As a result algorithm of derived area and volume formula should provide a better accuracy than linear and nonlinear spot level currently in use. Practical application of each method to the excavation volume is illustrated by digital elevation model of aerial photogrammetry and model test of aquarium.