• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.766-774
• /
• 2017

Software has been developed for simulating particle dispersion in a circular pipe with sudden-expansion, which models the fuel feeding system of a combustor that uses metal powder like aluminum as fuel. The Lagrangian based discrete tracer point method was employed for a plug flow of particles that satisfies local turbulent velocity fluctuations. A radial velocity component was created to improve the flow turning outwards in the recirculation zone. The particle distribution patterns from both with and without the component were directly compared with the experiments near the reattachment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.519-522
• /
• 2004

첨가제로 $Bi2O_3$를 첨가하고, 소결 온도를 변화시켜 고주파 내역에서 전자기적 특성이 안정적으로 유지될 수 있는 Ni-Zn 페라이트를 제조하고자 하였다. $Bi2O_3$의 첨가는 액상을 형성하여 소결을 촉진시키며, 0.3 wt% 첨가된 시편에서는 비정상 입자를 성장시켜 높은 전력 손실 특성을 나타내었다. 그러나 $Bi2O_3$의 적정한 첨가는 소결을 촉진시켜 밀도를 증가시키며, 균일한 입자를 형성하여 전력 손실이 감소하였다. Ni-Zn 페라이트에 $Bi2O_3$의 첨가는 공명 주파수 범위의 제어가 가능하며, 소결 촉진 및 밀도의 증가를 가져와 안정적인 재료를 제조할 수 있었다. 투자율의 일정성이 특정 주파수 10MHz 부근에서 급증하면서 급감하는 것은 공명이 생기고, 이러한 현장은 자벽 공명 또는 자벽의 이동에 의해 나타나는 것으로 보여진다.

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.393-400
• /
• 2004

Nitrosation of phenol (POH) was studied by adding hydrochloric acid and sodium nitrite to phenol solution with reaction temperature and time change. The optimum condition of nitrosation was found from the effects of hydrochloric acid and sodium nitrite concentration, reaction temperature, and reaction time changes on the production of nitrosophenol (POHNO). As a result, it was found that the optimum conditions were $5.0{\times}10^{-4}{\sim}2.0{\times}10^{-3}M$ range of $NO{_2}^-$ concentration, more than 0.10 M of HCl concentration, temperature of $80^{\circ}C$, and 3 hrs. of reaction time. In this condition, 10 U.S. E.P.A. classified priority environmental pollutant, phenols, were nitrosated. Nitrosated phenols were: POH, 2-Chlorophenol (2ClPOH), 2,4-diChlorophenol (2ClPOH), 2,4-dimethylphenol (24diMPOH), and 4-Chloro -3-methylphenol (4Cl3MPOH), and a small part of 2-nitrophenol (2NPOH). The ${\lambda}_{max}$ values of nitrosated phenols in acidic solution were around 300 nm, and those in basic solution were around 400 nm. Molar absorptivities (${\varepsilon}$) at the 400 nm of the nitrosated phenols in the basic solution were 1.5~2.0 times larger than those at 300 nm in acidic solution. It was also found by Capillary-HPLC chromatograms of the nitrosated phenol solutions that the production of the nitrosophenols were interfered by the excess concentration of nitrite (more than $3.0{\times}10^{-3}M$).

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.174-179
• /
• 1984

Some physico-chemical properties of proteolytic enzyme produced from Streptomyces alboniger Hesseltine were characterized. The optimal pH and temperature of the enzyme were around pH 9.0 and $40^{\circ}C$, respectively. The enzyme was stable between pH $6.0{\sim}10.8$ and the enzyme activity was not inactivated by heat treatment in lower temperature than $40^{\circ}C$. However the enzyme activity decreased by 70% of the initial activity for 10minutes at $70^{\circ}C$. The Km value was $7.1{\mu}M$ with Hammarsten casein and $333.3{\mu}M$ with cytochrom C. The activity of enzyme was inhibited by metal ions in the order of $Fe^{+++}>Hg^{++}>Cu^{++}>Pb^{++}>Zn^{++}$, whereas $Ca^{++}$ increased the enzyme activity. There was no effect of $Mg^{++}$ and $Co^{++}$ on the enzyme activity. The enzyme was inhibited by EDTA strongly. When $Ca^{++}$ was added to the EDTA-denaturated enzyme, the activity of enzyme was restored.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.12
• /
• pp.51-61
• /
• 2014

This paper presents an experimental study of the plugging effect on the capacity of open-ended piles installed in sandy soil. Full-scale tests, including dynamic and static axial-compression load tests, were carried out on three instrumented piles with different diameters (508.0, 711.2 and 914.4 mm). To measure the outer and inner shaft resistances acting on the piles, a double-walled system was utilized with instrumented strain gauges on the outside and inside walls of the pile. The results of field tests show that the inner shaft resistance was mostly mobilized at the location between the pile tip and 18-34% of the total plug length. It was found that the soil plugging in the lower portion has influence on the inner shaft resistance. In addition, it can be also demonstrated that the ratio of inner shaft resistance plus annulus load resistance to total resistance decreased with increasing pile diameters. The results of these tests show that the relationship between the degree of plugging and pile diameter is clearly established. Direct observations of the soil plugs were made and used to quantify both the plug length ratio (PLR) and the incremental filling ratio (IFR). Based on this result, it was found that the N value of the standard penetration test (SPT) is highly correlated with the IFR.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.121-130
• /
• 1993

The GaP crystals were grown by synthesis solute diffusion method and its properties were investigated. High quality single crystals were obtained by pull-down the crystal growing ampoule with velocity of 1.75mm/day. Etch pits density along vertical direction of ingot was increased from 3.8 ${\times}{10^4}$c$m^{-2}$ of the first freeze to 2.3 ${\times}{10^5}$c$m^2$ of the last freeze part. The carrier concentration and mobilities at room temperature were measured to 197.49cc$m^2$/V.sec and 6.75 ${\times}{10^{15}}$c$m^{-3]$, respectively. The temperature dependence of optical energy gap was empirically fitted to $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$/(373. 096+TJeV. Photoluminescence spectra measured at low temperature were consist with sharp line-spectra near band-gap energy due to bound-exciton and phonon participation in band edge recombination process. Zn-diffusion depth in GaP was increased with square root of diffusion time and temperature dependence of diffusion coefficient was D(Tl = 3.2 ${\times}{10^3}$exp( - 3.486/$k_{\theta}$T)c$m^2$/sec. Electroluminescence spectra of p-n GaP homojunction diode are consisted with emission at 630nm due to recombination of donor in Zn-O complex center with shallow acceptors and near band edge emission at 550nm. Photon emission at current injection level of lower than 100m A was due to the band-filling mechanism.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.114-123
• /
• 2009

The species composition and biomass of coralline algae around three (Uljin, Wolseong and Gori) nuclear power plants on the east coast of Korea were investigated seasonally from February 1997 to October 2006. As a result, 13 species of coralline algae were found during the past ten years. Among them, Corallina pilulifera, C. officinalis, Amphiroa zonata and Pneophyllum zostericolum were common species that occurred more than 50% in frequency during the study period. Species number of coralline algae were between 10$\sim$12 species at the breakwaters near the outfalls of power plants and 8$\sim$12 species at the control area, and differences in species composition were not observed among study sites. Seasonal fluctuations of mean biomass were 0$\sim$2,530 g dry wt m$^{-2}$ and dominant species in biomass was Corallina pilulifera at all the study sites. The breakwaters of power plants generally had a greater coralline algal biomass than the control area. Biomass proportions of coralline algae at the breakwaters of power plants were also higher than those at the control area. At the Uljin sites, particularly, biomass of coralline algae showed greatest in summer and biomass proportion showed highest during the summer season. Differences in the spatio-temporal patterns of coralline algae around three nuclear power plants on the east coast of Korea were presumably due to the regional temperature variations.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.49-53
• /
• 1969

Some properties of glucose isomerizing enzyme which produced by the strain K-17 in xylose containing nutrient broth medium were investigated. The optimal pH for enzyme reaction was indicated about 7.2 and optimal temperature was about $75^{\circ}C$. The same optimal temprature was indicated by both cell free extract and acetone dried cells using as enzyme. The glucose isomerizing enzyme from strain K-17 was not inhibited by the high concentration of substrate even in a suturated glucose solution, but most enzyme was inactivated by the heat treatment at $80^{\circ}C$. The maximum fructose forming ratio from glucose was about 50 percents.

• Korean Journal of Optics and Photonics
• /
• v.26 no.3
• /
• pp.168-171
• /
• 2015

The heat flow characteristics of a high-power optical semiconductor source have been analyzed using a 3D CFD commercial tool, and the thermal resistance values for each of the layers revealed the places for thermal bottlenecks to be improved. As the heat source of a LD (Laser Diode) has a small volume and a narrow surface, the effective thermal cross-sectional area near it is also quite small. It was possible to expand the cross-sectional area effectively by using graphene layers on the TIM (Thermal Interface Material) layers of a LD chip. The effective values of heat resistance for the layers are compared to confirm the improvement effect of the graphene layers before and after, which can be considered to expand the thermal cross section of the heat transfer path.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.269-278
• /
• 2004

In this study, hydraulic and hydrologic safety of an existing dam with morning glory spillway was evaluated and the problems were derived in order to control extreme floods efficiently. For design flood(520cms and EL. 170.3m), the spillway was turned out to have no problem for discharge and negative pressure in vertical transition. However, the critical point for discharge starts with EL. 170.7m which transits weir flow condition to orifice flow condition and there may be negative pressure in weir crest. While maximum water level can not be greater than EL. 170.5m including freeboard according to the dam design criteria, the maximum water level based on reservoir routing was turned out to be EL. 172.46m, and fundamental measures should be requested and planned.