• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.468-474
• /
• 2015

Electrically conductive polymer nanocomposites were prepared by the inclusion of graphene-based nanofillers. Graphene oxide (GO) and reduced graphene oxide wrapped by poly(styrene sulfonate) (PSS-RGO) were used as nanofillers to make good dispersion with the aqueous dispersion of polystyrene (PS) particles. GO sheets were synthesized by the modified Hummers' method from graphite, and PSS-RGO sheets were prepared by the reduction of GO-dispersed PSS solution with hydrazine monohydrate. Morphology and properties of PS/GO and PS/PSS-RGO nanocomposites via latex technology were investigated. Both nanofillers showed well dispersed morphology in PS matrix. Rheological and electrical percolation thresholds were 0.28 and 0.51 wt% for GO, and 0.50 and 1.01 wt% for PSS-RGO respectively. It is speculated that PS/GO nanocomposites showed better conductivity than PS/PSS-RGO counterparts due to the partial recovery of GO by thermal reduction during molding.

• Ecology and Resilient Infrastructure
• /
• v.4 no.2
• /
• pp.105-114
• /
• 2017

This study performed physical habitat simulation for fish and macroinvertebrate species in the Gongneung River. Target fishes were selected as Rhinogobius brunneus and Zacco platypus. Target macroinvertebrate species were selected as Hydropsyche kozhantschikovi and Chironomidae. Habitat suitability curves were constructed by using monitoring data from the monitoring project which is called "the survey and evaluation of aquatic ecosystem health". For calculation of CSI, weighted mean method was used. For macroinvertebrates species, the weighting factor derived from analytic hierarchy method was considered. River2D, which is capable to simulate flow in two-dimensional space, was selected for flow computation. Composite suitability index was simulated for target fish and macroinvertebrate species for discharge of drought, low, normal, and averaged-wet flow. Simulation results show that Chironomidae and Hydropsyche kozhantschikovi prefer the pool and riffle habitat, respectively. Rhinogobius brunneus and Zacco platypus show high suitability in riffle habitat.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.527-535
• /
• 2020

The purpose of research is to examine mothers with elementary school children in Chungcheong and the convergence effect of recognition of food labeling standards on purchasing behavior. A two-step cluster analysis was performed for group classification according to the purchase behavior of processed foods and the collection was determined by Schwarz's BIC criteria. Three types were determined: "convenience pursuit," "large mart preference," and "high cost reverse purchase". The proportion of college graduates in 'large mart preference' was higher, the proportion of employment mothers in 'high cost reverse purchase' was higher, and the need for food labeling standards was higher in 'large mart preference'. 'Shelf life' was recognized as the most important item. 'Large market preference' scored higher in 'used materials' and 'food additives', 'nutrition labelling'. In order to improve the purchasing behavior of processed foods, above all else, it is necessary to develop customized educational media that can be easily applied to real life.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.431-436
• /
• 2015

To determine fusion-complex activity of Camellia extract extracted hot water, this study was conducted. Special catechin was identified at this extract by analysis of catechin. In analysis of antioxidant activity, the extract was contained antioxidant material and flower among the other parts showed high antioxidant activity. flavonoid showed most high content of Camellia. Flavonoid content was found to be $223.29{\pm}0.005mg/g$ to measured most high to stem, a control group was measured Green tea new leaves $126.14{\pm}0.005mg/g$. Total polyphenol content exhibited most high content at new leaves and flavonoid showed most high content at stem. ${\gamma}$-Amino butyric acid (GAVA) among the free amino acid showed highly at all parts.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.545-549
• /
• 2006

Blends of poly(acrylic acid- co-maleic acid) (PAM) with poly (vinyl alcohol) (PVA) were pre -pared in distilled water PVA/PAM/saponite (PVA/PAM/SPT) nanocomposite films were prepared with various clay contents by using the solution intercalation method. The variations of the dispersion, morphology, and thermo-mechanical properties of the nanocomposites with clay content in the range 0 to 9 wt% were examined. Up to 3 wt% clay loading, the clay particles were homogeneously dispersed in the PVA/PAM blends. However, some agglomerated structures form in the polymer matrix above a clay content of 7 wt%. The thermal stability of the hybrids was increased linearly with increasing the clay loading up to 9 wt%. The maximum strength and modulus were obtained at a clay content of 7 wt%. Thus, the addition of small amounts of clay to the PVA/PAM blends produced PVA/PAM nano-composites with improved the thermo-mechanical properties.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1728-1737
• /
• 2020

The purpose of this study was to verify the effects of the types of exercise on the health-related fitness among the elderly women, and to provide the information for managing and preventing the chronic disease. 40 elderly women who living in the B metropolitan city participated in the study and randomly divided four groups(control, aerobic exercise, resistance exercise, and combined exercise). The exercise groups performed 50 min, 3 times/week for 8 weeks at RPE 11-13. Low body strength, dynamic balance, static balance, and agility were significantly improved in all exercise groups after the intervention. Cardiovascular endurance was improved in aerobic and combined exercise groups. Consequently, any types of exercise could be improved the daily living fitness for elderly women if exercise intensity were the same. In addition, the combined exercise may be more suitable type of exercise for elderly.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.138-150
• /
• 2007

The purpose of this study was to evaluate the difference of surface roughness of composite resin according to composite resin type, polishing methods, and use of resin sealant. Two hundred rectangular specimens, sized $8{\times}3{\times}2mm$, were made of Micro-new (Bisco, Inc., Schaumburg, IL, U.S.A) and Filtek Supreme (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and divided into two groups; Micronew-M group, Filtek Supreme-S group. Specimens for each composite group were subdivided into five groups by finishing and polishing instruments used; M1 & S1(polyester strip), M2 & S2 (Sof-Lex disc), M3 & S3 (Enhance disc and polishing paste), M4 & S4(Astropol) and M5 & S5 (finishing bur), Polished groups were added letter B after the application of resin surface sealant (Biscover), eg, M1B and S1B. After specimens were stored with distilled water for 24hr, average surface roughness (Ra) was taken using a surface roughness tester. Representative specimens of each group were examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using paired t-test, ANOVA and Duncan's tests at the 0.05 probability level. The results of this study were as follows ; 1. The lowest Ra was achieved in all groups using polyester strip and the highest Ra was achieved in M5, S5 and M5B groups using finishing bur. On FE-SEM, M1 and S1 groups provided the smoothest surfaces, M5 and S5 groups were presented the roughest surfaces and voids by debonding of filler on the polished specimens. 2. There was no significant difference in Ra between Micronew and Filtek Supreme before the application of resin sealant, but Micronew was smoother than Filek Supreme after the application of resin sealant. 3. There was significant corelation between Ra of type of composite resin and polishing methods before the application of resin sealant (p=0.000), but no significant interaction between them after the application of resin sealant. On FE-SEM, most of composite resin surfaces were smooth after the application of resin sealant on the polished specimens. 4. Compared with before and after the application of resin sealant in group treated in the same composite and polishing methods, Ra of M4B and M5B was statistically lower than that of M4 and M5, and S5B was lower than that of S5, respectively (p<0.05). In conclusion, surface roughness by polishing instruments was different according to type of composite resin. Overall, polyester strip produced the smoothest surface, but finishing bur produced the roughest surface. Application of resin sealant provided the smooth surfaces in specimens polished with Enhance, Astropol and finishing bur, but not provided them in specimens polished with Sof-Lex disc.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.157-163
• /
• 2007

To examine the effects of dietary organic selenium and vitamin E supplementation on egg production, egg weight, daily egg mass, feed intake, feed conversion, egg quality, lipid-soluble antioxidative capacity (ACL) in egg yolk, and selenium retention of egg in laying hens, Hy-Line laying hens of 77 wk old were replaced in the individual cage for 12 week. A corn-soybean meal based diet was supplemented with 0 (control), vitamin E 100 IU/kg and the combination of 0.9 ppm Se from selenium yeast (SY) and vitamin E 50, 100 and 150 IU/kg. Egg production and daily egg mass were significantly increased (P<0.05) in supplemental vitamin E 100 IU, and 0.9 ppm SY + vitamin E 50 IU than control for the whole experimental period. However, feed intake and feed conversion were not affected by supplemental vitamin E and SY. Haugh unit was significantly (P<0.05) higher in supplemental vitamin E 100 IU and 0.9 ppm SY + vitamin E 50 IU than control, 0.9 ppm SY + vitamin E 100 and 0.9 ppm SY + 150 IU in week 5. Haugh unit of the eggs during storage decreased significantly(P<0.05) from day 1 to day 11. However, Haugh units of the eggs from 0.9 ppm SY + vitamin E 150 IU treated groups did not decreased significantly until day 5. Yolk color was significantly (P<0.05) higher in 0.9 ppm SY + vitamin E 50 and 0.9 ppm SY + 100 IU than other treatment groups in week 1. Selenium concentrations of egg were significantly increased (P<0.05) in 0.9 ppm SY + vitamin E than control and vitamin E 100 IU groups. Lipid-soluble antioxidative capacity (ACL) in egg yolk was significantly (P<0.05) higher in supplemental combination of 0.9 ppm SY + vitamin E 150 IU when compared to those of other treatment groups.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.379-384
• /
• 2007

The nanocomposites with inorganic nano powder, improved thermal stability, were prepared by urethane polymerization. The structure and surface properties of the nanocomposites were determined by X-ray diffraction and FT-IR, respectively. The thermal stabilities were studied using TGA and DSC. Their morphologies and mechanical properties were observed by SEM and UTM. As a result, the nanocomposites with MMT led to the increase of the silicate layers. The distance between layers of the nanacomposites with MMT was increased by $7.5{\AA}$ and the new peaks at $1038cm^{-1}$ were shown in the presence of the Si-O groups on the silica. The thermal stabilities of the nanocomposites were higher than those of pore polyurethane matrix. The nanocomposites had higher in mechanical properties than the pure polyurethane matrix.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.835-837
• /
• 2017

In this paper, manufacturing processes of cylindrical composite lattice structures using filament winding method was described. Cylindrical composite lattice structures were manufactured in accordance with four major steps. Silicon mold of lattice shape was installed on mandrel and then continuous fiber was wound on silicon mold. After winding process, in order to ensure the same thickness for all regions, compression process was done for its intersection parts. Finally, the composite lattice structure was demoulded after curing in oven. It was found that the manufactured cylindrical composites lattice structure had 2.4% of dimensional error compared to the design requirements.