• Design Convergence Study
• /
• v.15 no.2
• /
• pp.1-15
• /
• 2016

The purpose of this study is to identify the characteristics of aging-friendly technology that can be integrated into future smart homes in an aging society. The literature survey and content analysis method were used to collect and analyze data. Papers of the international journal ICOST (International Conference on Smart Homes and Health Telematics) that professionally deal with converged technologies were analysis units. Sixty-five papers among 215 papers published from 2007 through 2014 were selected on the basis of end-users orientation. Totally, out of 65 papers 76 technology items were extracted. Characteristics of those technologies were analyzed focusing on purpose and application methods. As results, in terms of purpose, the technologies were oriented to provide both of psychological and physiological support to the users, focusing on the safety, convenience, health and entertainment to extend independent life of the elderly. Among the application method such as building structure, furniture, product, wearable device and free movable robot, product were dominant. Through those results, the aging-friendly technology is expected to alleviate a wide range of issues in aging society.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.333-339
• /
• 2009

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 ${\mu}m$) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/$cm^2$. Teeth were thermocycled fivehundred times between $50^{\circ}C$and $550^{\circ}C$for 30s at each temperature. Electrical conductivity (${\mu}A$) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (${\mu}A$)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

• Journal of Plant Biotechnology
• /
• v.32 no.1
• /
• pp.51-55
• /
• 2005

Chinese leymus (Leymus chinensis Trin.) is a perennial grass that is widely distributed at high pH sodic and arid soil in the northeastern Asia. An efficient regeneration system was established through somatic embryogenesis of mature seeds to understand its high adaptability to harsh environmental conditions on the basis of molecular biology. The calli were efficiently induced (about $70\%$) from mature seeds on MS medium supplemented with $1.5\;\cal{mg/L}$ 2,4-D. Somatic embryos were formed from the surface of embryogenic callus on MS medium supplemented with $2.0\;\cal{mg/L}\;kinetin\;and\;0.5\;\cal{mg/L}$ NAA after 3 weeks of culture. Roots were induced from the shoot when transferred to MS medium without plant growth regulator for 1 week. Plant regeneration rate was $36\%$ and regenerated plantlets were grown to normal mature plants in pot. An efficient plant regeneration system in this study will be useful for molecular breeding of L. chinensis.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.407-414
• /
• 2017

With an increase in urban crimes in various forms, this study is intended to analyze the effectiveness of the service design that presented a new model resolving crime risks through differentiated thinking paradigm and problem approaches. The empirical case addressed in this study is 'the project to create resident-driven safe community in Duryu-dong, Dalseo-gu, Deagu though service design'. This project is evaluated as having prepared a prevention-oriented local safety system through a preemptive and resident-centered process. The project was promoted as a 'natural monitoring capacity building program' for residents to prevent local crimes, a 'social role expansion program' for local safety, and 'crime prevention environment design', which provides comprehensive solutions for residents' safety. Here, designers act as exerts in designing a task-based platform that can be driven by residents rather than a visual environment improver, and reorganizing the local ecosystem by expanding the opportunities for residents to interact. This case identifies the role of service design as binding the solidarity of local residents beyond the improvement of the crime environment and giving them the potential capacity to maintain a safe living space in relation to a safety issues of community.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.283-293
• /
• 2012

In order to have better insights into the chemical differentiation of Earth from its magma ocean phase to the current stratified structure, detailed information of crystallization kinetics of silicate melts consisting of the magma ocean is essential. The structural transitions in oxide glasses and melts upon crystallization provide improved prospects for a systematic and quantitative understanding of the crystallization processes. Here, we report the $^{27}Al$ 3QMAS NMR spectra for sol-gel synthesized $Al_2O_3$ glass with varying temperature and annealing time. The NMR spectra for the amorphous $Al_2O_3$ show well-resolved Al coordination environments, characterized with mostly $^{[4,5]}Al$ and a minor fraction of $^{[6]}Al$. The fraction of $^{[5]}Al$ in the alumina phase decreases with increasing annealing time at constant temperature. The NMR results of $Al_2O_3$ phases also imply that multiple processes (e.g., crystallization and/or changes in structural disorder within glasses) could involve upon its phase transition. The current results and method can be useful to understand crystallization kinetics of diverse natural and multi-component silicate glasses and melts. The potential result may yield atomic-level understanding of Earth's chemical evolution and differentiation from the magma ocean.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.411-426
• /
• 2022

Energy plays a significant role in modern lifestyle because of our extensive reliance over energy-operating devices. Therefore, there is a need for alternative and green energy resources that can fulfill the energy demand. For this, fuel cell (FCs) especially anion exchange membrane fuel cells (AEMFCs) have gained tremendous attention over the other (FCs) due to their fast reaction kinetics without using noble catalyst and allow to use of cheaper polymers with high performance. But lack of highly conductive, chemically, and mechanically stable anion exchange membrane (AEM) still main obstacle to the development of high performance AEMFCs. Therefore, graphene-based polymer composite membranes came into the existence as AEMs for the FCs. The exceptional properties of the graphene help to improve the performance of AEMs. Still, there are lot of challenges in the graphene derivatives based AEMs because of their high tendency of agglomeration in polymer matrix which reduced their potential. To overcome this issue surface modification of graphene derivatives is necessary to restrict their agglomeration and conserved their potential features that can help to improve the performance of AEM. Therefore, this review focus on the surface modification of graphene derivatives and their role in the fabrication of AEMs for the FCs.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.447-456
• /
• 2012

In space design or form design step, recognized necessity of digital design practical use. Also, deduced systematized analysis method that can use various function of CAD system actively. These method can promote the practical use because third dimensional digital design escapes plan and design process in concept that get presentation result after is completed, establishes role of effective and systematic digital design at planning and design of space or form. This uses by a design tool that ease designer's judgment and space and form analysis in architectural planning and design process that third dimension digital design is not part by a simplicity design tool. Share and takes advantage of digital design process method that is deduced in this study, need continuance of connection study for more effective and systematic digital design methodology deduction. Need public ownership of teaching material development and teaching method that can deliver extended third dimension digital design process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.269-280
• /
• 1995

저작은 교합과 악운동 뿐만 아리라 근신경계, 고위 중추까지 복합적으로 관여하는 기능적 행위이다. 교합 양상은 다양하게 저작 형태에 영향을 끼치며 저작 효율에도 관여한다. 저작 형태는 다양한 모양을 가지나 두가지 전형적인 군 즉, 전방에서 관찰시 그 양상이 수직적이며 chopping운동을 닮은 군과 저작 형태가 주로 측방으로 이루어지며 grinding을 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 치아가 교합접촉 및 저작 효율에 미치는 영향을 고찰해 보고자 하는 것이다. 하악운동궤적기록기를 이용하여 정상교합을 가진 치과대학생중 전형적인 2가지 저작형태를 보이는 각 10명씩을 피검자로 선택하였다. 3가지 하악위 즉, 중심위, 작업측 비작업측에서의 교합접촉을 고무형 교합인기재로 기록하여 천공부의 직경이 1mm이하면 1점, 1-2mm또는 직선상이면 2점, 2mm이상이면 3점으로 평가하여 각 점수의 합으로 좌우 소구치 및 대구치의 접촉 지수를 측정하였다. 저작 효율을 평가하기 위해 땅콩 3g(${\pm}0.01g$)을 20회 저작하게 한 후 3회 입을 헹구어 뱉게 하였다. 체눈 크기가 각 0.425, 0.60, 0.85, 2.0, 4.0인 체에 거른 후 $65^{\circ}C$로 오븐에서 세시간 말려 무게를 측정하고 중심 크기$(M_{50})$과 저작효율치(R)를 계산 비교하여 다음과 같은 결론을 얻었다. 1. Chopping형은 grinding형에 비해 중심위에서 더 넓은 교합접촉을 보였다(P<0.01). 2. Grinding형은 chopping형에 비해 측방위에서 더 넓은 교합접촉을 보였다(P<0.01). 3. Chopping형은 중심크기($(M_{50})$)과 저작효율치(R)로 비교하였을 때 더 좋은 저작 효율을 보였다(P<0.01).

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.2
• /
• pp.87-94
• /
• 2017

Microsoft Office is an office suite of applications developed by Microsoft. Recently users with malicious intent customize Office files as a container of the Malware because MS Office is most commonly used word processing program. To attack target system, many of malicious office files using a variety of skills and techniques like macro function, hiding shell code inside unused area, etc. And, people usually use two techniques to detect these kinds of malware. These are Signature-based detection and Sandbox. However, there is some limits to what it can afford because of the increasing complexity of malwares. Therefore, this paper propose methods to detect malicious MS office files in Computer forensics' way. We checked Macros and potential problem area with structural analysis of the MS Office file for this purpose.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.245-259
• /
• 2003

This paper deals with an Umbrealla Arch Reinforcement Method (UARM) in tunnelling. It is known that the mechanism of the reinforcement system is too complex to be simulated in existent finite element (FE) frameworks when considering its complex geometry of pipe arrangements and contribution of each component of the reinforcement to reinforcing effect. In this study a 3-D elastoplastic FE procedure is, therefore, proposed by introducing homogenisation technique, which is used to define mathematically elastic as well as elastoplastic characteristics of a reinforced ground material as a composite. A number of practical suggestions are addressed considering staged constructions of tunnels. For illustrative purposes, a series of parametric studies are undertaken and anisotropic characteristics of the reinforced ground as well as effects of the reinforcement on tunnel convergences are investigated. It is found that the reinforced ground material defined in homogenisation framework has its mechanical characteristics reasonably representing inherent geometrical and quantitative characteristics of each of constituents.