• Journal of the military operations research society of Korea
• /
• v.34 no.1
• /
• pp.31-45
• /
• 2008

This paper describes a development of the operational architecture of a low altitude air defense automation system using a systems engineering approach. The future battlefield is changing to new system of systems that command and control by the network based BM/C4I. Also, it is composed of various sensors and shooters in an single theater. Future threats may be characterized as unmanned mewing bodies that the strategic effect is great such as UAVs, cruise missiles or tactical ballistic missiles. New threats such as low altitude stealth cruise missiles may also appear. The implementation of a low altitude air defense against these future threats is required to complex and integrated approach based on systems engineering. In this view, this work established an operational scenario and derived operational requirements by identifying mission and future operational environments. It is presented the operational architecture of the low altitude air defense automation system by using the CORE 5.0.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.9-18
• /
• 1995

The use of CAD/CAM systems is growing fast in the shipbuilding industry. To develope a geometric modeler, the existing CAD/CAM systems have been analysed. Because existing systems have closed architectures, it is not easy to investigate the internal structures. However, new trends in the software engineering, open architectured systems, pose some possibility to develope the geometric modeler. Several geometric modelers are analysed to extract component functions and modules. ACIS of the Spatial Technology, AIS of the CAM-I consortium, the STEP part for the geometry and topology, CAD*I of the ESPRIT project, and domestic modelers are investigated. Based on this analysis, a reference model which shows the framework of the modeler is proposed. With the data structure supporting non-manifold topologies, the reference model can be used to encourage a cooperative development program.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.201-210
• /
• 2023

Dust filter membranes play a crucial role in human life and various industries, as they contribute to several important aspects of human health, safety, and environmental protection. This study presents the development of a polysulfone@polyphenylene sulfide/polytetrafluoroethylene (PSf@PPS/ePTFE) composite dust filter membrane with excellent thermal stability and adhesion properties for high-temperature conditions. FT-IR analysis confirms successful impregnation of PSf adhesive onto PPS fabric and interaction with ePTFE support. FE-SEM images reveal improved fiber interconnection and adhesion with increased PSf concentration. PSf@PPS/ePTFE-5 exhibits the most suitable porous structure. The composite membrane demonstrates exceptional thermal stability up to 400℃. Peel resistance tests show sufficient adhesion for dust filtration, ensuring reliable performance under tough, high-temperature conditions without compromising air permeability. This membrane offers promising potential for industrial applications. Further optimizations and applications can be explored.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.245-258
• /
• 2008

We describe here how we can use microfluidic technologies for fabricating functional materials that could be potentially utilized in cosmetics; these include void structures, functional particulate materials, shell materials, and multi-layered colloids. We can obtain these functional materials as microfluidic approaches provide precise control over both outer dimensions and inner morphology of emulsion drops in picoliter-volume scales with high throughput. We have confirmed that this technique has a great potential to fabricate novel particles and capsules with a variety of chemical compositions as well as higher orders of layers. This microfluidic approach will allow us to develop a lot of new techniques that are useful for a variety of applications, including delivery systems, chemical separations, bio-sensing, actuators, and so on. We do believe that these new techniques will help cosmetic industry not only give rise advanced functional materials and systems but also widen its product categories.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.484-489
• /
• 2002

Hot-pressure sintered laminar composites with alumina/zirconia or mullite/zirconia as an outer layer and alumina/zircon (resulting in reaction-bonded mullite/zirconia during sintering) as an inner layer were fabricated by tape casting and lamination. Various forms of crack were observed in sintered laminar composites, these cracks included channel cracks in the outer layer, transverse cracks in the inner layer and interface cracks debonding interlayer. Based on detailed microscopic observations, the cracks were attributed to thermal expansion mismatch between the oxides consisting of the each layer. In particular, the interlayer and transverse cracks were confirmed in the laminates consisted of the mullite/zirconia system as the outer layers, however, those cracks were not observed in the alumina/zirconia system used. In addition, the crack propagation did not exhibit same behavior in the two kinds of outer layer when the indentation load was applied.

• Composites Research
• /
• v.29 no.4
• /
• pp.151-155
• /
• 2016

Graphene has been a valuable candidate for use as electrodes for supercapacitors. In order to improve the surface area of graphene, three-dimensional graphene was synthesized on porous Ni nanostructure using thermal chemical vapor deposition and microwave plasma chemical vapor deposition. The structural and chemical characterization of synthesized graphene was performed by scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. It was confirmed that three-dimensional and high-crystalline multilayer graphene onto various substrates was synthesized successfully.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.109-117
• /
• 2012

Recently, large-scale multi-hazards have been occurred in the various areas of the world. A variety of Earth observation sensors such as satellite EO, aerial and terrestrial LiDAR have been utilized for global natural disaster monitoring. Especially, commercial satellites which observe the Earth regularly and repeatedly, and acquire images with cm-level high spatial resolution enable its applications to extend in the fields of disaster management from advanced disaster monitoring to timely recovery. However, due to existing satellite operation systems with some limitations in almost real-time and wide regional disaster response, close international collaborations between satellite operating organizations like NASA, JAXA, KARI etc. have been required for collecting satellite images in time through a satellite platform with multi-sensors or satellite constellation. For responding domestic natural disaster such as heavy snowfall and extreme rainfall in 2011, this paper proposes a disaster management system for timely decision-making; rapid acquisition of satellite imagery, data processing, GIS analysis, and digital mapping through cooperation with NDMI in Korea and International Charter-Space and Major disasters.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.89-92
• /
• 2008

This study investigates the shear behavior of architectural masonry veneer wall reinforced with specific reinforcement details proposed by this study. For this purpose, experimental tests were conducted using one un-reinforced masonry(URM) wall specimen and three reinforced masonry(RM) wall specimens under quasi static cyclic loads. Un-reinforced(plain) masonry wall is expressed that behavior and failure mode are different for aspect ratio(L/H) and axial compressive force. The test variables are wall aspect ratio and presence of reinforcement. These specimens are masonry structure for architectural clading that is not to exist the axial compressive force. thus the axial compressive force is excepted from test variable. Test result, Behavior of specimens are dominated over rocking mode, but final failure modes are combined with different behaviors. And FEMA273 has proposed the equation of shear strength of masonry pier subjected to in-plane loading. Shear strength equations are classified four types of failure mode that is Rocking, and Toe-Crushing, Bed-Joint-Sliding and Diagonal-Tension. FEMA273 equations predict the behavior modes well, but shear strength is shown in different result.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.119-124
• /
• 2010

More than 7,000 rare Mendelian diseases have been reported, but less than half of all rare monogenic disorders has been discovered. In addition, the majority of mutations that are known to cause Mendelian disorders are located in protein-coding regions. Therefore, exome sequencing is an efficient strategy to selectively sequence the coding regions of the human genome to identify novel genes associated with rare genetic disorders. The "exome" represents all of the exons in the human genome, constituting about 1.5% of the human genome. Exome sequencing is carried out by targeted capture and intense parallel sequencing. After the first report of successful exome sequencing for the identification of causal genes and mutations in Freeman Sheldon syndrome, exome sequencing has become a standard approach to identify genes in rare Mendelian disorders. Exome sequencing is also used to search the causal genes and variants in complex diseases. The successful use of exome sequencing in Mendelian disorders and complex diseases will facilitate the development of personalized genomic medicine.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.210-216
• /
• 2012

For the recycling of rapid-cooled steel slag, various specimens were prepared with the various replacement ratios of the rapid-cooled steel slag and the addition ratios of polymer binders. The physical properties of these specimens were then investigated by absorption test, compressive strength test, flexural strength test and hot water resistance test, and the pore and the micro-structure analysis was performed using scanning electron microscope. Results showed that the flexural strength increased with the increase of rapid-cooled steel slag and polymer binder, but the compressive strength showed a maximum strength at a certain proportion. By the hot water resistance test, compressive strength and flexural strength decreased remarkably and the total pore volume increased but the pore diameter decreased. SEM observation of the structure before the hot water resistance test revealed a very compact infusion of structure but the decomposition or thermal degradation appeared in polymer binders when observed after the hot water resistance test.