• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.42-48
• /
• 2006

In this study, a repetitive response surface enhancement technique (RRSET) is proposed as a new system approximation method for the efficient multidisciplinary design and optimization (MDO). In order to represent the highly nonlinear behavior of the response with second order polynomials, RRSET introduces a design space transformation using stretching functions and repetitive response surface improvement. The tentative optimal point is repetitively included to the set of experimental points to better approximate the response surface of the system especially near the optimal point, hence a response surface with significantly improved accuracy can be generated with very small experimental points and system iterations. As a system optimizer, the simulated annealing, which generates a global design solution is utilized. The proposed technique is applied to several numerical examples, and demonstrates the validity and efficiency of the method. With its improved approximation accuracy, the RRSET can contribute to resolve large and complex system design problems under MDO environment.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.118-121
• /
• 2014

Image interpolation is a method of determining the value of new pixel coordinate in the process of image scaling. Recently, image contents are likely to be a large-capacity, interpolation algorithm is required to generate fast enhanced result image. In this paper, fast multiple mixed image interpolation for image resolution enhancement is proposed. The proposed method estimates expected 12 shortfalls from four sub-images of a input image, and generates the result image that is interpolated in the combination of the expected shortfalls with the input image. The experimental results demonstrate that PSNR increases maximum value of 1.9dB, SSIM increases maximum value of 0.052, and the subjective quality is superior to any other compared methods. Moreover, it is known by algorithm running time comparison that the proposed method has been at least three times faster than the compared conventional methods. The proposed method can be useful for application on image resolution enhancement.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.182-190
• /
• 2005

In the paper, we propose an intelligent automatic parking assist system. To realize an automatic parking, first, the prospective parking position and the location of a vehicle should be recognized. Second, the system should compute a path which introduces the parking position precisely with avoiding any obstacles. Third, the handle should be controlled so that the vehicle moves through the path. To calculate the location of the vehicle and its surroundings, the system applies the camera image method to transforming input images to the plane map. It also uses the inertial navigation method which recognizes the position and the direction of a moving vehicle by using a kinematic model of the vehicle. To generate a path of the vehicle, the simple path method and the Bezier spline method are tested. The divided arc method which generates multiple paths is also tested. We apply a method which makes the system choose the best path with multiple objective functions. We introduce the virtual road method, as a solution for the problem of mechanical time delay, to have the vehicle followed the designated path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.1007-1016
• /
• 2005

This paper presents a feature extraction method for shape based retrieval of 3D models. Since the feature descriptor of 3D model should be invariant to translation, rotation and scaling, it is necessary to preprocess the 3D models to represent them in a canonical coordinate system. We use the PCA(Principal Component Analysis) method to preprocess the 3D models. Also, we apply that to make a MBR(Minimum Boundary Rectangle) and a circumsphere. The proposed algorithm is as follows. We generate a circumsphere around 3D models, where radius equals 1(r=1) and locate each model in the center of the circumsphere. We produce the concentric spheres with a different radius($r_i=i/n,\;i=1,2,{\ldots},n$). After looking for meshes intersected with the concentric spheres, we compute the curvature of the meshes. We use these curvatures as the model descriptor. Experimental results numerically show the performance improvement of proposed algorithm from min. 0.1 to max. 0.6 in comparison with conventional methods by ANMRR, although our method uses .relatively small bins. This paper uses $R{^*}-tree$ as the indexing.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.169-175
• /
• 2008

The existing block encryption algorithms have been designed for the encryption key value to be unchanged and applied to the round functions of each block. and enciphered. Therefore, it has such a weak point that the plaintext or encryption key could be easily exposed by differential cryptanalysis or linear cryptanalysis, both are the most powerful methods for decoding block encryption of a round repeating structure. Dynamic cipher has the property that the key-size, the number of round, and the plaintext-size are scalable simultaneously. Dynamic network is the unique network satisfying these characteristics among the networks for symmetric block ciphers. We analyze the strength of Dynamic network for meet-in-the-middle attack, linear cryptanalysis, and differential cryptanalysis. Also, In this paper we propose a new network called Dynamic network for symmetric block ciphers.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.163-173
• /
• 2014

Sound propagation algorithm for a sonar simulator is required to run in real-time and should be able to model the range and depth dependence of the Korean ocean environments. Ray model satisfies these requirements and we developed an algorithm for range-dependent ocean environments. In this algorithm, we considered depth-dependence of sound speed through rays based on a rectangular cell method and layer method. Range-dependence of sound speed was implemented based on a split-step method in the range direction. Eigen-ray is calculated through an interpolation of ray bundles and Gaussian interpolation function was used. The received time signal of sonar was simulated by Fourier transform of eigen-ray solution in the frequency domain. Finally, for the verification of proposed algorithm, we compared the results of transmission loss with other validated models such as BELLHOP, SNUPE, KRAKEN and OASES, for the Pekeris waveguide, wedge, and deep ocean environments. As a result, we obtained satisfactory agreements among them.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2014

Precise Point Positioning (PPP) algorithms using GPS code pseudo-range measurements were developed and their accuracy was validated for the purpose of implementing them on a portable device. The group delay, relativistic effect, and satellite-antenna phase center offset models were applied as fundamental corrections for PPP. GPS satellite orbit and clock offsets were taken from the International GNSS Service official products which were interpolated using the best available algorithms. Tropospheric and ionospheric delays were obtained by applying mapping functions to the outputs from scientific GPS data processing software and Global Ionosphere Maps, respectively. When the developed algorithms were tested for four days of data, the horizontal and vertical positioning accuracies were 0.8-1.6 and 1.6-2.2 meters, respectively. This level of performance is comparable to that of Differential GPS, and further improvements and fine-tuning of this suite of PPP algorithms and its implementation at a portable device should be utilized in a variety of surveying and Location-Based Service applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.39-47
• /
• 2001

In this paper, the hydroelastic behavior of a mat-type large floating structure is analyzed in time domain by using mode superposition method. The time-memory function is estimated by Fourier transforming the wave damping coefficients, which are computed by a higher-order boundary element method based on potential theory. Meanwhile, the structural response is obtained by time integrating the eigenmodes of the structure. Numerical examples are made for three test cases on the scaled model of a mat-type large floating structure ; weight pull-up case, weight drop case and weight moving case. In all three cases, the numerical results coincide well with experimental data.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.3
• /
• pp.183-190
• /
• 2002

This paper describes the synthesis of robust and non-fragile H$\infty$ state feedback controllers for linear varying systems with affine parameter uncertainties, and static state feedback controller with structured uncertainty. The sufficient condition of controller existence, the design method of robust and non-fragile H$\infty$ static state feedback controller, and the set of controllers which satisfies non-fragility are presented. The obtained condition can be rewritten as parameterized Linear Matrix Inequalities(PLMls), that is, LMIs whose coefficients are functions of a parameter confined to a compact set. However, in contrast to LMIs, PLMIs feasibility problems involve infinitely many LMIs hence are inherently difficult to solve numerically. Therefore PLMls are transformed into standard LMI problems using relaxation techniques relying on separated convexity concepts. We show that the resulting controller guarantees the asymptotic stability and disturbance attenuation of the closed loop system in spite of controller gain variations within a degree.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.11-16
• /
• 2006

This paper reports the correlation between dielectric constant and degree of amorphism of the hybrid type SiOC thin films. SiOC thin films were deposited by high density plasma chemical vapor deposition using bistrimethyl- silylmethane(BTMSM,$H_{9}C_{3}-Si-CH_{2}-Si-C_{3}H_{9}$) and oxygen precursors with various flow rate ratio. As-deposited film and annealed films at $400^{\circ}C$ were analyzed by XRD. The SiOC thin films were amorphous from XRD patterns. For quantitative analysis, the diffraction pattern of the samples was transformed to radial distribution function by Fourier analysis, and then compared with each other. The degree of amorphism of annealed films was higher than that of as-deposited ones. The dielectric constant varied in accordance with flow rate ratio of precursors. The lowest dielectric constant was obtained from the as-deposited film which has the highest degree of amorphism after annealing.