• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1254-1261
• /
• 2007

Mc-OFDM(Multi code-Orthogonal Frequency Division Multiplexing) modulation has been developed for high-speed data transmission over wireless channels. However, this system suffers critical problem from relatively high PAPR(Peak to Average Power Ratio). To reduce PAPR, we suggest a new technique, called Mapping using (N+1)PSK and demonstrate the performance of mapped Mc-OFDM system. On the other side, in OFDM system, each sub-carrier experiences different fading, thus some sub-carriers may be completely lost because of deep fade. To solve a above mention problem, we propose cooperative communications that improve the reliability of sub-carriers through spatial diversity.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2
• /
• pp.120-127
• /
• 2002

As a new type of a linear decorrelating receiver, the Pseudo-Decorrelator was presented for asynchronous code division multiple access systems by the author. In this paper, the concept of the Pseudo-Decorrelator is extended to derive a multiuser receiver for WCDMA uplink systems over a Rayleigh fading multipath channel. Starting with the analysis of the multiple access components of the decision statistics, a non-square cross-correlation matrix for each bit is obtained. This cross-correlation matrix is then inverted, and the inverted matrix is applied to the decision statistics obtained from a conventional receiver. This receiver is near-far resistant and outperforms conventional receivers even for the cases in which synchronization errors, such as time delay errors and phase errors exist.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.660-666
• /
• 2004

Transmitted data may be compensated by using estimated channel values that are obtained with pilot symbols in OFDM-CDMA systems. Generally, a USE (Minimum Mean-Squared Error) estimator using correlations between pilot symbols gives good results, but its structure is so complicated. Starting with a modification of PA (Pilot-Aided) algorithm using pilot symbols and PADD (Pilot-Aided Decision-Directed) algorithm using both pilot and data symbols, a new channel estimation algorithm with more simpler structure is proposed. The performance of this algorithm is evaluated with varying mobile speed in a Ralyleigh multipath fading environment through computer simulations. The simulation results show that the proposed channel estimation algorithm outperforms a conventional PA algorithm.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.137-146
• /
• 2002

Field piezocone dissipation tests are performed, and the results are compared to the Rowe cell consolidation tests results to investigate the consolidation characteristics of soft marine deposit at the same location in Korea. From these results, statistical formula fur the relation between the coefficients of horizontal consolidation$(c_r)$ from Rowe cell consolidation tests and $t_{50}$ from pore pressure dissipation tests by Piezocone is suggested through the regression analysis. The results are also compared to the existing theoretical formula. It is also shown that suggested formula is similar to Torstensson's(1977) formula based on cylindrical cavity expansion theory and Houlsby and Teh's(1988) formula based on strain path method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.280-289
• /
• 2005

A single degree of freedom system and transmissibility are key concepts in many problems of vibration isolation. In order to apply this approach, however, several assumptions must be satisfied, which are often not realistic. For examples, in practical systems, vibration transmissions at multi-point with multi-degree of freedom(translational and rotational DOF) take place and mobilities or impedances of receiver structures cannot be ignored any more especially over high frequency range. Therefore, a multi-dimensional treatment is required for accurate estimation of dynamic behavior of the system. In this paper, an approach using vibrational power flow is introduced to deal with analysis of multi-dimensional vibration isolation system in a more practical way and in aspects of vibration isolations and vibration path analysis. Procedures of this approach and some results of research for vibrational power path analysis with rotational terms included are presented. Difficulties in this method are also discussed.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.37-43
• /
• 1996

Two type interference air refractometers have been developed by using a frequency stabilized He-Ne laser in a transverse magnetic field. The refractometers were based on symmetric multiple pass interferometer. In this system, One part of the beams passed through air whose refractivity is to be measured and the other part of the beams passed through a vacuum champer to be used as a reference. Several measurements were performed under normal air condition. Maximum difference between two interference refractometers was ${\pm}2{\times}10^{-8}$.

• Geotechnical Engineering
• /
• v.10 no.1
• /
• pp.103-118
• /
• 1994

A series of drained triaxial testis was performed on a Band by use of cubical triaxial apparatus, in which three principal stresses could be applied independently. The stress -strain behavior on the same stress path with cubical triaxial test was analyzed with application of the isotropic single hardening constitutive model presented by Lade. The behavior predicted by the constitutive model presented good coincidence with experimental results during poi mary loading. However, the predicted Mo윤ding and reloading behavior wan much different from results of cubical triaxial testy. That is, the softening part of the prediction might result in a rough approximation, since the plastic work parameters of single hardening model were based on the hardening portion of the data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.11-20
• /
• 1988

A general finite element method is developed to analyze reinforced concrete plates under dead loads and monotonically increasing live loads. This method can be used to trace the load-deformation response and crack propagation through elastic, inelastic and ultimate ranges. The internal concrete and steel stresses can also be determined for any stage of the response history. A layered 8 node isoparametric element taking account of coupling effect between the membrane and the bending action is developed. An incremental tangent stiffness method is used to obtain a numerical solution. Validity of the method is studied by comparing the numerical solutions with other results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.709-712
• /
• 2003

이동체의 위치를 기반으로 하는 다양한 응용 어플리케이션들은 그 영역을 점차 확대하고 있다. 위치를 기반으로 한다는 것은 이동체의 현재위치 뿐만 아니라 과거 및 미래 위치에 대한 예측을 모두 포함한다. 이런 이동체의 위치를 효율적으로 적용할 수 있는 분야가 이동체의 위치 기반 라우팅 분석 이다. 이는 특정 이동체의 과거 위치 궤적, 실시간 현재 위치 추적, 그리고 지도정보와 결합된 최단 및 최적 경로 산출 등의 다양한 분야를 포함한다. 본 논문에서는 이런 위치 기반 라우팅 서비스를 웹 서비스 환경으로 확장한 내용을 언급한다. 웹 지리정보시스템은 사용자에게 친숙한 방법으로 지리, 속성데이터의 디스플레이 및 분석 등 다양한 서비스를 제공한다. 이는 위치기반 라우팅 서비스를 웹 지리정보시스템과의 결합하여 분산 웹 환경에서 효율적으로 라우팅 서비스를 제공할 수 있는 구조를 서술한다. 이동체의 위치는 GPS 기반의 획득 방법으로 얻어지고 지리정보와의 맵 매칭을 통해 실세계의 좌표로 변환하게 된다. 또한, 대용량 위치 데이터를 엑세스 하기 위한 메모리와 기억장치 간의 효율적인 데이터 엑세스 기법이 제시된다. 위치 기반 라우팅 분석의 결과물은 웹상에서 제공되기 위해 XML 기반의 웹 서비스 데이터로 변형된다. 이를 위한 XML 기반의 지리정보 데이터 스카마인 GML 의 적용 기술을 언급한다.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 1998.07a
• /
• pp.32-33
• /
• 1998

생물체에서 유전외적 변형의 하나인 DNA 메틸화는 cis-acting factor의 조성변화를 통하여 세포특이 유전자의 발현과 virus latency, genomic imprinting, mutagenesis등과 같은 생물학적 효과를 나타내는 것으로 알려져 있다.(reviewed by Olle Heby, 1995). 5-azaCR, 5-azaCdR 그리고 6-azaCR의 처리결과는 배아자체의 DNA 메틸화의 유지가 정상발생에 필수적임을 알 수 있으며, 메틸화에 의한 배아발생 조절기작이 존재함을 암시하고 있다. 이러한 과정에서 5-azaCR과 5-azaCdR은 서로다른 경로를 통하여 배아발생에 관여함을 보여주었다. 즉, 5-azaCdR은 주로 DNA에 incorporation되어 작용하는 것으로 여겨지며, 5-azaCR은 DNA 보다는 RNA에 incorporation되어 작용하는 것으로 나타났다. 그리고, 비록 소수의 유전자만이 조사되었지만, 5-azaCdR의 incorporation에 의한 cis-acting factor의 변화는 전사인자인 c-myc proto-oncogene과 fluid 수송에 관여하는 $Na^{+}$, $K^{+}$-ATPase 유전자의 전사를 억제하지 않았다. 반면, 5-azaCR의 RNA로의 incorporation은 전사인자인 c-myc proto-oncogene의 전사를 억제하였으며, 연이어 fluid 수송에 관련되어있는 $Na^{+}$, $K^{+}$-ATPase 유전자의 전사를 억제하였다. 이것은 아마도 RNA로 incorporation된 5-azaCR은 RNA의 post-transcriptional processing에 영향을 주어 trans-acting factor의 조성을 변화, 전사적 repression을 유발한 것으로 사료된다. 생쥐 착상전 초기배아에서 DNA 메틸화는 short-term하게는 cis-acting factor로써 전사적 수준에서 유전자발현 조절하며, 그리고 유전자발현을 통하여 long-term하게는 배아발생에 관여 할 것이라고 사료된다.