• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.970-976
• /
• 2007

This paper presents a novel polar transmitter architecture with a 2-bit sigma-delta modulator. In the proposed architecture, the 2-bit sigma-delta modulator is introduced to suppress quantization noise of conventional sigma-delta modulator. The power amplifier configuration is also modified in a binary form to accommodate the 2-bit digitized envelope signal. The Ptolemy simulation results of the proposed structure show that the spectral property is greatly improved in full transmit band of EDGE system. The fine quantization scheme of the 2-bit modulator lowers the noise level by 10dB without increasing the over-sampling ratio, which may be obtained if the over-sampling ratio increases twofold. Dynamic range is also enhanced up to 5dB owing to the new form of the power amplifier in the transmitter.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.2
• /
• pp.81-89
• /
• 2003

With the rapid development of information and communication technology, online dissemination increases rapidly. So, It becomes more important to protect information. Recently the authentication system using public key infrastructure (PKI) is being utilized as an information protection infrastructure for electronic business transactions. And the smartcard system makes the most use of such an infrastructure. But because the certification based on the current PKI provides oかy basic user certification information, the use has to be limited in various application services that need the identification and authorization information as well as face-to-face information of the user. In order to protect a system from various kinds backings and related treats, we have proposed angular and private key multiplexing for prevention of smartcard forgery and alteration based on a photopolymer cryptosystem. When smartcard becomes prone to forgery and alteration, we should be able to verify it. Also, our parer proposes a new authentication system using multi authentication based on PKI. The smartcard has an excellent advantage in security and moving.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.197-204
• /
• 2010

This paper proposes a new body-effect compensated switch configuration for low voltage and low distortion switched-capacitor (SC) applications. The proposed circuit allows rail-to-rail switching operation for low voltage SC circuits and has better total harmonic distortion than the conventional bootstrapped circuit by 19 dB. A 2-1 cascaded sigma-delta modulator is provided for performing the high-resolution analog-to-digital conversion on audio codec in a communication transceiver. An experimental prototype for a single-stage folded-cascode operational amplifier (opamp) and a 2-1 cascaded sigma-delta modulator has been implemented m a 0.25 micron double-poly, triple-metal standard CMOS process with 2.7 V of supply voltage. The 1% settling time of the opamp is measured to be 560 ns with load capacitance of 16 pF. The experimental testing of the sigma-delta modulator with bit-stream inspection and analog spectrum analyzing plot is performed. The die size is $1.9{\times}1.5\;mm$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.362-369
• /
• 2007

APSK (Amplitude Phase Shift Keying) digital modulation is characterized by the circular positioning of the transmission symbols in the constellation diagram. Due to such structural characteristics, the peak-to-average power ratio of the APSK modulation is lower than that of the QAM (Quadrature Amplitude Modulation), and the amount of performance degradation over nonlinear channels can be mitigated. The APSK modulation scheme has recently been adopted as satellite communication system standards including the DVB-S2 (Digital Video Broadcasting - Satellite, Version 2). In this paper, a BER (Bit Error Rate) upper bound approximation formula is derived using the channel model with the output power saturation characteristics, and its accuracy is demonstrated. Using the derived formula, the input power level that minimizes the BER is determined. The optimized performance based on the radii ratio of the 16APSK constellation and the channel saturation level is also presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.79-85
• /
• 2004

In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK undulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 KHz. The transmitting power of RF-ID reader was 500 mW

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1394-1401
• /
• 2008

This work investigates the effects of vibration on the passive intermodulation distortion characteristics of base station antennas for 800 MHz CDMA mobile communication systems. In general, base station antennas are located at high positions such as on building rooftops or iron towers. Thus the antennas are always affected by random vibrations, coming from various natural environmental factors such as rain and wind, or from living environmental factors such as vehicles and trains passing by. The measured intermodulation distortion characteristics before and after vibration accelerated degradation test show that vibrations are indeed the main cause for the intermodulation distortion performances of such antennas. To minimize the effects of vibrations, a new antenna design isptoposed that has an improved tolerance for vibrations. Experimental results show that the proposed antenna design dramatically reduces the degradation of the intermodulation distortion more than 35 dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.39-48
• /
• 2000

We newly proposed a polymer based vertical asymmetric optical coupler, which was characterized by simple fabricating procedure and short coupling length. And we fabricated a thermo-optic modulator using the polymeric optical coupler. We optimized the proposed device by coupling characteristic analysis. In a TE polarized 1.33${\mu}{\textrm}{m}$ wavelength, we obtained very short coupling length(L=277.6${\mu}{\textrm}{m}$) with 0.4${\mu}{\textrm}{m}$ thickness of middle layer, high coupling efficiency(94%), and asymmetric vertical waveguides with n$_{u}$ = 1.522, n$_{l}$ = 1.51. We implemented vortical asymmetric thermo-optic modulator with lower inverted rib waveguide and upper slab waveguide. In the 600Hz bandwidth and 4.5㎽ input power, the extinction ratio of the mode was 17㏈ with an insertion loss of 4.5㏈.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.107-114
• /
• 2004

This paper presents block and timing diagrams of the DWA(Data Weighted Averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the MATLAB modeling, the optimized coefficients of the integrators are obtained to design the modulator. The fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed third-order multibit modulator is fabricated in a 0.35${\mu}{\textrm}{m}$ CMOS process. The modulator achieves 75dB signal-to-noise ratio and 74dB dynamic range at 1.2Vp-p 825kHz input signal and 52.8MHE sampling frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1887-1894
• /
• 2010

This paper proposes a new switched-capacitor sigma-delta modulator for automotive radars. Developed modulator is used to perform high-resolution analog-to-digital conversion (ADC) of high frequency band signal in a radar system. It has supply voltage of 2.7V, and has body-effect compensated switch configuration with low voltage and low distortion. The modulator has been implemented in a $0.25{\mu}m$ double-poly and triple-metal standard CMOS process, and it has die area of $1.9{\times}1.5mm^{2}$. It showed better total harmonic distortion of 20dB than the conventional bootstrapped circuit at the supply voltage of 2.7V.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.74-77
• /
• 2011

본 논문에서는, 지상파 3D HDTV 방송 전송을 위한 VSB(Vestigial Side Band) 변조방식의 심벌 타이밍 및 반송파 동기부 구조를 제안하고 그 성능을 검증해 보았다. 제안하는 동기부의 동작은 다음과 같다. 먼저 반송파 주파수 옵셋에 독립적인 심벌 타이밍 복구 알고리즘으로 타이밍 동기를 이룬다. 그리고 제안하는 프레임 검출 방법으로 프레임의 시작점을 알아내고, 반송파 주파수 옵셋 복구에 필요한 훈련 열을 얻어낸다. 마지막으로, 얻어진 훈련 열을 이용하여 반송파 주파수 옵셋과 반송파 위상 옵셋을 복구한다. 컴퓨터 모의실험 결과, 제안하는 동기부 구조는 이상적으로 동기를 이루었을 때의 BER(bit error rate)성능과 근접한 성능을 나타내었다.