• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.678-684
• /
• 2007

This research has defined the factors of noise in cars during subway train services, which is surfacing as a new environmental trouble. It shows additional accomplishment of a discerning analysis on the standard of noise regulation as well as its seriousness. According to the Enforcement Regulations for Noise and Vibration under the Ministry of Environment and its standard noise regulation figure 70dB, we divided two groups of which train noise figures are over and under 70dB respectively, and used their 359 results about noise, geometric structures and operation elements, for this analysis. The results and suggestions are following. First of all, when we discern the seriousness of noise in a train, the track type has mattered in geometric structure and the velocity in operation elements. Therefore, when we construct subway from now on, we should take the track type in consideration and establish plans to keep proper speed in respect of operation. Secondly, the established discernment model in this research can be used in making alternative plans or improvement of subway trains hereafter, showing relatively high accuracy of estimation. Consequently, the readjustment of geometric structure and operation elements is needed, not to make it over the regulation standard of noise in case the noise in train is serious. The discriminant model of this research can be used as elementary material for comfortable and safe subway trains, making the estimation of noise seriousness possible.

• Weed & Turfgrass Science
• /
• v.6 no.1
• /
• pp.40-54
• /
• 2017

The mound grave of Korean traditional funeral culture is a unique habitat which is a Zoysiagrass lawn being sustainable in proper management. We phytosociologically described an unusual Zoysiagrass vegetation with Gueldenstaedtia verna by the Zürich-Montpellier School's method and analyzed eco-floristic characteristics. A new association, Gueldenstaedtio-Zoysietum japonicae ass. nov. hoc loco, was identified and subdivided into festucetosum ovinae, typicum, and trifolietosum repensae. The subassociations were distinguished by the difference in species composition resulting from site accessibility and lawn management method. The association was assigned as not only a regional but also a locally-limited vegetation type, which distributes on a particular microhabitat with strong continentality in the Daegu regional subdistrict of Bioclimatological division. The Zoysiagrass vegetation of Korea was considered as a continental type apparently different from the oceanic type of Zoysion japonicae (Miscanthetea sinensis, Caricetalia nervatae). Mound graves in Korea should be acknowledged as a meaningful habitat for the in-situ conservation of biodiversity and phytocoenosen, despite being a secondary grassland of Gueldenstaedtio-Zoysietum japonicae.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2020

This study analyzes the results of applying the ISO19030 (hull and propeller performance monitoring method) standard to an actual 178 k bulk vessel. Recently, there have been many attempts to apply various energy reduction solutions to vessels to continuously strengthen GHG reduction regulations and secure maritime competitiveness. However, it is not easy to quantitatively analyze the performance of a ship. To resolve these problems, shipping companies, marine paint companies, ship owners, and transportation associations have appointed specialists and standardized the ISO19030 (standard of hull and propeller performance monitoring method) guidelines in 2016 after three years of continuous review. The ISO19030 standard provides methods to monitor hull and propeller performance quantitatively through standardized procedures, thus allowing ship managers to arrive at informed decisions for hull and propeller maintenance, and to evaluate energy-saving solutions and ship-maintenance efficiency. The ISO19030 standard provides a method of analyzing the ship's own performance by collecting the ship's operation and agency data and correcting its environmental and operating factors. In this paper, we apply the ISO19030 standard to three actual ships and propose the ISO19030 application result and the improvement point of the current ISO19030 standard.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.31-31
• /
• 2011

1990년 이후 공산체계인 구소련과 동구권이 몰락하고 세계적으로 탈냉전의 변화와 우리의 민주정부 수립 후 햇빛정책 등에도 불구하고 북한은 적화통일을 포기하지 않고 작년 11월에 연평도에 포격을 가하여 민간인과, 군이 2명이 사망하는 사건이 발생 하였다. 또한 북한의 공격은 과거의 포탄공격뿐만 아니라 미사일이나 화생방과 같은 생화학물질 탑재 가능한 공격이 예상된다. 이에 대비 정부에서는 고정시설의 화생방 방호는 일단유사시에 국민의 생명과 재산을 보호하는데 필수요소로서 집단보호개념에 도입하고 있으며, 현재 각 중요 대피시설 및 지자체의 기존 대피시설을 개인방호, 탐지, 제독, 운용절차를 포함한 실태파악 및 재래식 탄을 포함한 통합적인 조치를 마련하고 있다. 작년 2010년 11월 연평도에서의 북한 포격이후 우리는 서해5도나 접경지역 주민과 그리고 근접거리의 서울시민들이 안전하게 포격으로부터 피난 할 수 있는 민방위대피소에 대한 문제점이 대두되고 대책방안을 요구하고 있다. 소방방재청 기준에 따르면 직격(直擊) 핵폭탄을 제외한 화생방, 재래식 무기 공격에 견딜 수 있는 시설은 '1등급 대피시설'인데 서울에는 한 곳도 없다. 고층건물의 지하 2층 이하나 지하철, 터널 같은 2등급 대피시설도 폭격은 견딜 수 있지만 화생방 공격에는 취약하다. 지하상가 등 건축물의 지하층, 지하차도나 보도는 그보다 더 취약한 3등급이며 단독 주택의 지하층처럼 방호 효과가 떨어지는 곳이 4등급이다. 2등급으로 분류된 대피소의 경우 분류만 되어 있을 뿐 장기간 대피시 시민들이 사용 할 수 있는 거주공간이 아닌 임시 대피로서의 역할만 하고 있다. 본 연구에서는 민방위 기본법에 따라 지하에 $3.3m^2$ 당 4명 이상이 대피할 수 있는 규모의 공간을 갖추기만 하면 대피시설로 볼 수 있는 현 문제점과 1등급에서 4등급으로 나뉘어져있는 민방위 대피소와 대피소가 있지만 피난공간으로서의 역할과 구조적으로 안전한가에 대한 국내외 실태 분석을 통하여 분석한 결과 우리는 서해5도 대피시설의 반 이상이 무용지물이고 접경지 또한 피난시에 피난장으로서의 대피소가 난방이나, 구급품과 식구 시설 등이 구비가 되어 있지 않고 대피시설로 지정한곳이 간판이나 안내시설이 없다. 외국의 경우 스위스는 연방정부의 관리책임으로 전쟁이나 핵 확산에 따른 화생방 업무 전담팀을 두고 있으며, 방독면은 개인 방호물자로서 전국민 100% 보유하고, 각가정이나 건축, 시설물의 경우 화생방 표준 대피시설 설치관련 규정 마련 시행하고 있다. 대피시설은 화생방 방호가 가능한 지휘부용 대피시설과 일반 주민대피용 시설을 구분하여 설치운영하고 있으며, 전국에 650만개를 설치하고 있다. 결론은 대피시설이 북한 공경시 피난시설로의 활용방안을 모색 등급구분에 따른 현실적용 수정과 기존 대피소 보강과 재선별이 필요하고, 신축시 설계 표준설계안 그리고 기존의 대피소에 대한 보수, 보강방법 가이드라인과 장기간 거주에 대한 설비구축 등과 국민 대홍보등을 제안하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.53-63
• /
• 2016

In this paper, we proposed the improvements for performance test and surveying equipment regulations, standards, methods and procedures, depending on the need of improving the legal system for surveying equipment in a diverse and sophisticated surveying industry. This research was performed first investigating the existing legal systems(Act on the establishment and management of spatial data, Framework act on national standards, ISO 17123, JIS B 7912) with respect to the surveying equipment performance testing and the research for IOS and KOLAS suggested the improvements on the application for the surveying equipment performance testing standard. More exactly, first, two years were presented for the surveying equipment performance testing cycle considering the precise accuracy of the instrument stability, purpose and frequency of use, etc. Second, the abolition of the measurement distance by grade and the upward or cross-grade adjustment of the single prism standards about the light wave rangefinder and total station were suggested for the improvement on survey equipment performance criteria. Third, since the main function of total station is focused on a three-dimensional coordinate measurement due to the improvement of surveying equipment performance testing, it was proposed to use the precision(repeatability) of the coordinate measuring method as an evaluation method.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.259-266
• /
• 2017

The purpose of this study was to contribute to the field application cost effectively and reasonably by developing the functional piles that reinforces shear force. CFP pile (Concrete Filled Pretensioned Spun High Strength Concrete Pile with Ring type Composite shear connectors) developed in this study increases the shear stress by placing composite shear connector and filling the concrete into hollow part of the pile. By placing the reinforcement (H13-8ea) and the reinforcement (H19-8ea) into hollow section inside of PHC piles, it also improves the shear strength due to increasing steel ratio. It reinforces shear strength effectively by dowel force that is generated by putting reinforcement (H13-8) into the holes of composite shear connectors for the composite behavior of filled concrete and PHC pile. The study was reviewed and compared the calculated result of the shear strength by limit state design method highway bridge design standards (2012) and experiment result of the shear strength by KS F 4306. We can design the shear strength reasonably as the safety ratio of 2.20, 2.15, 2.05 is shown comparing to design shear strength, according to design shear strength on each cross sections and the experiment results of the CFP pile.

• International Commerce and Information Review
• /
• v.13 no.2
• /
• pp.235-258
• /
• 2011

Our country is operating designating the 6 free economic zones. Korea has designated fixed areas as economic special zones and made their management and living conditions equivalent to the level of advanced countries they are to support. One-Stop Service for the administrative demands that require the assistance at a national level in foreign investment, education, finance etc. However, these free economic zones are modified by regional development projects rather than inviting foreign capital. For the free economic zones to be operated effectively, the following methods should be followed: first, active management support activities should be constructed for the purpose of attracting foreign capital, second, a business model specifically designed to attract foreign capital should be implemented, third and finally, the independence and professionalism for the free economic zones should be strengthened.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.2
• /
• pp.287-304
• /
• 2020

There have been a number of legal & policy studies on the affecting factors of big data utilization, but empirical research on the composition factors of personal information regulation or data combination, which acts as a constraint, has been hardly done due to the lack of relevant statistics. Therefore, this study empirically explores the priority of personal information regulation factors and data combination factors that influence big data utilization through Delphi Analysis. As a result of Delphi analysis, personal information regulation factors include in order of the introduction of pseudonymous information, evidence clarity of personal information de-identification, clarity of data combination regulation, clarity of personal information definition, ease of personal information consent, integration of personal information supervisory authority, consistency among personal information protection acts, adequacy punishment intensity in case of violation of law, and proper penalty level when comparing EU GDPR. Next, data combination factors were examined in order of de-identification of data combination, standardization of combined data, responsibility of data combination, type of data combination institute, data combination experience, and technical value of data combination. These findings provide implications for which policy tasks should be prioritized when designing personal information regulations and data combination policies to utilize big data.

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.129-137
• /
• 2016

The guarantee of citizens' safety from crime is the reason for a nation's existence according to the social contract, and it is also a salient task in securing the citizens' right to the pursuit of happiness, which is a constitutional right expressing the nation's duty to its citizens. First, a procedure must be made mandatory that corresponds to the Miranda rule applied during the arrest of criminal suspect, which verifies whether there exists a risk of retaliatory crime to the victim of crime, crime reporter, or witness following their report of a crime or testimony. A measure to punish those who violate this should be devised. The second is the improvement of related laws and systems, such as expanding the scope of persons subject to protection from retaliatory crimes under the current law and strengthening information protection. Third, a retaliatory crime risk evaluation index must be developed, and the evaluation results must be quantified to clearly state measures and responsibilities, in detail, for personal safety at each level of intensity. The fourth is the expanded implementation of proactive personal safety measures for victims of crime and witnesses, as well as the development and application of advanced techniques. The last is a change in the perception s of those working for the judicial body. From the initial investigation stage of the crime to the diagnosis regarding the possibility of retaliation perpetrated on an ex-convict through psychological tests, systems of general cooperation, and mutual assistance must be established.