• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.287-294
• /
• 2012

In the high vacuum condition of the space, outgassing from any assembly of satellite can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. Therefore, all unit shall be check for compatibility with vacuum using CVCM (Collected Volatile Condensable Material) and TML (Total Mass Loss) in advance. CVCM and TML of the PZT-5 piezoelectric ceramic vibrator has less than 0.1% and 1.0% respectively. Also, it has less than 500 $ng/cm^2/hr$ of Thermoelectric Quartz Crystal Microbalance for vacuum bake-out test using high temperature(more than $80^{\circ}C$) and high vacuum (less than $5.0{\times}10^{-3}$ Pa). Thus, piezoelectric ceramic vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric ceramic vibrator is less than 1% under vacuum environments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.281-281
• /
• 2011

산업 환경에서 친환경 및 에너지효율성을 중요한 조건이 되면서 고효율성 및 다기능을 가진 재료에 대한 연구가 활발히 진행 되고 있다. 특히 Al-Ti-N 코팅은 이미 경도 측면에서 우수 하여 고속 공구 부품에 널리 사용되고 있고 최근에 Al-TiN에서 Si 첨가는 40GPa이상의 고경도와 1000도 이상의 산화온도를 지닌 나노 혼합물 코팅을 형성 시키는 것으로 알려져 있다. 본 연구에서 Al-Ti에 Si, Cu, Cr 을 첨가하였을 때 코팅을 형성하였을 때 바뀌는 물성 변화을 확인하였다. 이러한 연구를 위해 Al-Ti 합금 조성 중 가장 우수한 것으로 알려진 60:40으로 타겟을 만들어 스퍼터 장비를 이용해 코팅을 형성하여 기초 실험을 진행하였다. 그 근거로 하여 3원계인 Si, Cu, Cr 을 첨가하여 각각의 단일 타겟으로 만들고 코팅을 형성하였다. 타겟과 코팅의 성분이 동일한지 확인하기 위해 EPMA분석을 하였고 그 결과 오차 범위 내에 동일한 것으로 확인하였다. 또 내산화성 테스트를 위해 400도에서 1000도로 가열된 대기 중에 코팅 층을 1시간씩 노출시키는 공정을 통해 확인하였고 내식성 테스트는 SUS 304계열 위에 코팅을 하여 Potentiodynamic polarization scan 장비로 비교해 보았다. 표면경도는 3원계 코팅인 경우 질소비율이 증가할수록 30GPa ~ 35GPa까지 증가하였고 XRD 분석 결과와 비교 시 (111), (200) peak가 명확할수록 경도 값이 높은 것으로 확인하였다. 마모테스트 결과 3원계인 코팅 층이 dry상태에서 감소하는 경향을 보였다. 특히 0,26까지 감소한 Si 을 첨가한 코팅 층은 H/E지수도 좋아 마모트랙의 길이도 짧아 우수한 것으로 알 수 있었다. 이런 결과에서 보듯 3원소 이상 첨가 시 특성변화가 차이가 있다는 것을 알 수 있었다.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.177-182
• /
• 2009

The glycosylated human MINPP (multiple inositol polyphosphate phosphatase), which was recombinantly over-expressed by using industrial host, Pichia pastoris, showed the phytase activity against phytate ($InsP_6$) and the enzyme activity of the unglycosylated counterpart was decreased to 30%. The optimal phytase activity occurred at pH 7.4. The human MINPP showed high substrate specificity for $InsP_6$ with little activity on other organic phosphate conjugates such as para-nitrophenylphosphate (pNPP), ATP, and ribose-1-phosphate (R-1-P). The phosphatase activity against 2,3-bisphosphoglycerate (2,3-BPG) by human MINPP was increased to 1.2-fold in the presence of stimulator, 1 mM 2-phosphoglycolate (2-PG) but the phytase activity against $InsP_6$ was not affected by addition of 1 mM 2-PG. The phosphatase activity against 2,3-BPG by human MINPP was not increased in the presence of 2 mM $Mg^{2+}$ or 100 mM $Cl^-$.

• Korean Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.91-102
• /
• 2010

Water quality and epiphytic diatom on the submerged stems of reed (Phragmites communis), which occupy 90% of the Donghwa wetland macrophytes were monthly monitored at three points such as inflow stream, high- and low-level wetlands, and outflow stream between March and October, 2005. 1) A diverse and high density of diatom species observed in the cold-season, especially Nitzschia palea and Nitzschia amphibia dominated the diatom community without wetlands. 2) High DAIpo and TDI indices were measured over the sampling periods and stations, regardless of nitrogen increase and phosphorus increase through the wetlands. 3) Higher density of diatom species in high wetland than low wetlands was attributed in the enough nutrients and light penetration by low growth of reed. Therefore, epiphytic diatom of reed stem in Donghwa wetland, where high nutrients released from the sediment and reed debris after the death of macrophytes, flourished with low canopy of low reed vegetation.

• Journal of the Korean Geographical Society
• /
• v.37 no.3
• /
• pp.247-261
• /
• 2002

This study suggests that the contents and methods focusing on the leamer's geographical experience of everyday life and environments, are very effective for teaching and teaming in geography subject matter. The contents have to be selected and structurized from private geographies about their region of everyday life for teaming abstractive and scientific concepts of geography. Scientific concepts of geography, i.e. geographical concepts become 'scope'for selecting the contents and these systematic structure substitutes 'sequence'. The criteria by which selected contents of teaching and teaming based on everyday life may consist of three elements: region as leamer's place for everyday life; concrete experience of the place; and leamer's changing geographical experiences.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.725-728
• /
• 2002

A series of fabric filters including P-84, Nomex and PTFE were coated with a commercial $V_2O_5/TiO_2$ catalyst as an effort to develop a functional fabric filter of simultaneous removal of dust and NOx. The coating methods employed are sol-gel coating method, spray coating method and dip coating method, and the effects of coating method on NOx removal performance of functional fabric filter were investigated. Experimental conditions are as follows: the temperatures of $100-250^{\circ}C$ which are the normal operating temperature range of fabric filters, the space velocity of $5,000hr^{-1}$, the oxygen concentration of 6%, and the $NH_3/NO$ ratio of 1.0. Results showed that the sol-gel coating method gave the best NOx removal performance mainly due to its ability in controlling the amount of catalyst and uniform coating.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.938-944
• /
• 2008

The electro-optic properties of polymer-dispersed liquid crystal cells containing BDVE(Butanediol vinyl ether) in PN393 base pre-polymer were examined. The higher the contents of BDVE, the smaller becomes the droplet size. However, the droplet size was saturated around $3{\mu}m$ even at 40 wt% of BDVE. Both of contrast ratio and response time of PDLC cell fabricated with a new formula were found to be superior to the reference cell with PN393 by the factor of 4.9 and 0.15, respectively. However, the new formula made the operating voltage go higher compared to the reference cell of PN393 formula. Except for contrast ratio, response time as well as operating voltage were found to be highly stabilized by adding BDVE in PN393 base pre-polymer over the temperature range of $0{\sim}60^{\circ}C$ studied.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.456-461
• /
• 2017

In this study, the rheological properties of nitromethane gel propellants on nano/micron sized gelling agent are investigated. Silicon dioxide is used as the gellant with 5 wt%, 6.5 wt% and 8 wt% concentration, respectively, where the measurements are conducted under steady-state shear flow conditions using a rotational rheometer. The nitromethane/silicon dioxide gel showed non-Newtonian flow behavior for the entire experimental shear rate ranges. The gel fuels with nano-sized gellant had a slightly higher viscosity than the gel fuels with micron-sized one for low shear rate range. Additionally, it was found that Herschel-Bulkley model can hardly describe the rheological behavior of nitromethane gel propellant, but the NM model(by Teipel and Forter-Barth) is better suited to explain the rheological behavior of nitromethane gel propellant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.260-260
• /
• 2007

강유전성 세라믹스 재료로써는 PZT계열의 세라믹재료가 널리 쓰이고 있다. 이는 우수한 유전 및 압전특성을 가지고 있으나, PbO을 다량 함유하고 있어 $1000^{\circ}C$이상에서 PbO가 급격하게 휘발되는 성질에 따라서 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 과잉 PbO를 첨가시키기 때문에 PbO휘발로 인한 강한 독성이 인체에 유해하다. 최근에는 Pb의 환경문제가 대두됨에 따라 이를 대체할 다른 물질의 개발이 활발하게 연구되고 있다. 대표적인 비납계 강유전 세라믹스인 $(Na_{0.5}K_{0.5})NbO_3$ ($d_{33}$ = 120 pC/N, Kp = 39%, Qm = 210, 이하 NKN라 표기) 조성은 $KNbO_3,\;NaNbO_3$ 상태도에 따라 순수한 NKN 세라믹스는 $1140^{\circ}C$에서 안정상을 가지나, 높은 온도로 인하여$Na_2O$와 $K_2O$가 쉽게 휘발됨에 따라 화학량 비의 변화가 생겨 이차 상을 형성하기도 한다. 따라서 본 연구에서는 $LiNbO_3$의 새로운 고용체를 추가시켜 기본 NKN조성에 압전성 및 고온에서의 상안정성을 향상시키고자 하였다. 최적 조성을 설계하기 위하여 (1-x)$(Na_{0.5}K_{0.5})NbO_3-xLiNbO_3$, x=(0,0.02,0.04,0.06,0.08)의 범위에서 조성을 변화시키면서 실험하였다. 시편 제작은 일반적인 세라믹스 소결 공정을 적용하였는데, $850^{\circ}C$에서 5시간 하소 후 $1080^{\circ}C$에서 2시간 소결하였다. 하소 및 소결 후에는 XRD분석을 통해 perovskite구조를 확인하였고, 미세구조 확인을 위해 주사전자현미경 (SEM)으로 관찰하였다. 압전특성을 평가하기 위해 압전 $d_{33}$-meter를 사용하였으며, impedance analyzer (HP 4194A)를 이용하여 전기적 특성을 측정하였다.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.215-219
• /
• 2020

In this study, nanoporous iron oxide layers were fabricated by the anodization of 304 series stainless steel. K₂HPO₄/glycerol solution was used as an electrolyte for anodization. We investigated the anodization behavior according to various parameters such as electrolyte concentration, reaction temperature, applied voltage, and reaction time. As a result of anodization, we confirmed that the anodic growth rate of oxide layer on 304 series stainless steel increased with increasing the electrolyte temperature and applied potential. In order to form well-ordered porous nanostructures, the electrolyte temperature was at 160 ℃, and the applied potential was at 30 V in 10 wt% K₂HPO₄/glycerol electrolyte.