• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.512-512
• /
• 2017

날로 심각해지는 해수 오염, 유류사고, 해파리에 의한 인명피해 및 발전소의 경제적 피해사고, 해양 쓰레기 등과 같은 해양 환경 문제가 발생하고 있다. 이러한 해양환경문제를 해결하기위해 생물학적 방법과 물리적 방법이 있으나 생물학적 방법은 개체군과 종류의 변화로 그 적용이 어려운 실정이고, 물리적 방법은 지속적인 제거를 위한 비용적인 문제와 인부 및 자원봉사자의 안전문제가 발생한다. 따라서 에어버블을 이용한 각종 친환경적 방법이 주목받고 있다. 본 연구에서는 에어버블 차단막의 차단율을 증가시키기 위해 현장조건 내에서 에어버블의 거동특성에 대한 실험을 하였다. 실험을 위해 회류식 개수로 에어버블 거동실험장치를 제작하였다. 실험장치는 길이 8.1m, 높이 1.2m, 폭 0.7m이며, 두께 10mm의 투명 아크릴를 사용하여 에어버블의 거동을 관찰 할 수 있게하였다. 대형펌프를 사용하여 물이 회류함을 통해 흐름유속을 만들어 현장조건을 고려하였다. 에어버블을 분사하기 위해 압축공기 저장탱크와 연결된 분사구가 있으며, 노즐의 크기(0.5mm~1.0mm)로 분사량을 조절하고 분사압은 별도의 조절장치를 이용하여 0~5bar 범위의 분사압 조절을 가능하게 하였다. 초고속 카메라와 3축유속계를 사용하여 에어버블의 이동경로, 유속 및 에어버블의 거동을 측정하였다. 실험을 통한 구간별 에어버블의 거동 분석 결과, 상승속도는 분사구에서 분출되는 구간인 0~0.8m 에서는 상승속도가 증가하고, 0.8~1.2m구간에서는 속도가 다시 상승하는 경향을 확인하였다. 이는 수표면에 가까워질수록 수압이 작아져서 에어버블의 크기가 커짐에 따라 부력이 커짐으로 판단된다. 같은 이유로 분사량이 많을수록 상승속도도 같이 증가되는 것으로 나타났다. 유속에 따른 거동은 유속을 0.1m/s~0.5m/s로 조정하여 유속별 에어버블이 수표면까지 도달하는 거리, 속도 및 이동경로를 분석하였다. 유속과 에어버블이 수표면까지 도달하는 거리는 비례하여 증가하는 것을 확인하였다. 실험결과를 바탕으로 조건에 따른 에어버블 거동 경험식을 도출하였다. 본 실험은 회류식 개수로 에어버블 거동실험장치를 활용하여 에어버블 거동 경험식을 제시하였으며, 이를 바탕으로 에어버블 차단막 기술 개발을 위한 기초자료로 이용될 수 있을 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.321-324
• /
• 2017

Bubblesort graph is mathematically modeled with bubbling methods, which can arrange data. Bubblesort graph Bn's degree is n, it's routing path length ${\frac{n(n-1)}{2}}$, and its network cost is $O(n^3)$. In this paper we suggest the number of Bubblesort graph's degree reduced to half as a solution to improve the network cost of Bubblesort graph. The Bubblesort graph which has the following restriction is a connected graph randomly from node U to node V for routing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.317-317
• /
• 2023

수자원의 확보와 어류 서식 환경보전이라는 두 가지 측면은 수자원 이용이라는 목적하에 합의되기 어려운 문제를 가지고 있다. 점차적으로 수자원이 고갈되는 현시점에 효율적 물관리를 위해 최근에는 단절된 하천을 연결하기 위한 기술들이 개발되고 있으며, 이중 안정적인 물공급 시스템을 구축하기 위한 수중터널이 그러한 기술 중 하나이다. 수자원의 확보 측면에서는 의미가 있는 방법일 수 있으나 물리적으로 동떨어져 있던 서로 다른 환경을 연결하는 문제로 인한 부작용이 발생하는데 이중 외래어종 유입으로 인한 수중생물의 환경변화가 가장 큰 문제로 대두되고 있다. 이러한 문제를 방지하기 위해 어류의 이동을 차단하는 기술 또한 개발되고 있으며 그물망, 버블스크린, 빛, 소리를 이용한 다양한 방법을 통해 어류의 접근을 방지하고자 노력하고 있다. 본 연구에서는 이러한 차단시설 중 기포를 이용한 버블스크린과 관련하여 효율성을 높이기 위한 방법을 모색하고자 실제 버블의 상승속도에 영향을 미치는 여러 가지 불확실성 인자들에 대한 상관성과 인과관계를 검토하고자 하였다. 이를 위해서 외부적 원인에 대한 오차요소를 확인하고 결과값에 영향을 미치는 여러 가지 변수에 대하여 검토하고자 하는 실험연구를 수행하였다. 버블실험을 위한 수로는 길이 15m, 폭 1.5m 의 제원을 가지는 직선수로에서 수행하였으며, 버블 발생을 위한 튜브는 PVC 재질이며, 5cm 간격으로 1mm 직경을 갖는 파이프를 제작하여 활용하였다. 실험의 분석은 이미지를 이용한 방법을 사용하였으며 분석위치 및 버블사이즈 그리고 해석격자 크기에 대한 상관분석 및 회귀분석을 통해 각각 인자들과의 관계를 규명하고자 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6397-6402
• /
• 2015

This research was performed to review operating parameters, optimum condition and check characteristic of microbubble generation for using bubble size distribution according to venturi specification. Optimum operating condition have airflow rate 0.3 LPM, 3 bar(pressure tank) and connecting nozzle directly(without valve), it is advantageous to generate microbubble. In case of characteristic of microbubble generation according to venturi specification, effect that nozzle specification affects bubble size distribution is low impact. But considering performance aspects, when using nozzle that throat diameter 3-4 mm, $D_{50}$ are $54.98-61.19{\mu}m$(D3L15, D4L15), fraction of bubble less than $50{\mu}m$ are 0.326, 0.345. And it is superior to others. Besides, $D_{50}$ and fraction of bubble less than $50{\mu}m$ of throat length 20 mm are $49.40-54.98{\mu}m$, 0.447, respectively And nozzle that throat length 20 mm is relatively tendency to generate microbubble stably.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.211-217
• /
• 2016

In this research, the performance of surface covering technique using a white-colored bubble sheet on reducing the cracking due to the plastic, and drying shrinkages for high rise building construction were evaluated by comparing the exposed surface without any surface treatment. From the results of the experiment conducted during fall season, desired results of decreased numbers, length, maximum width, and area of cracking were obtained without a significant difference on heat of hydration and cumulative temperature. Therefore, it is considered that the surface covering technique using bubble sheet is an appropriate method for preventing plastic and drying shrinkage cracking at fall season concrete construction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.463-468
• /
• 2017

For transdermal drug delivery, needless injection system is composed of laser and microjet injector. Main mechanism of microjet injector is the laser-induced bubble. Nd:YAG and Er:YAG laser are used as a power source. Laser parameters such as pulse duration and wavelength are considered, which are core parameters to control the bubble motion. The Nd:YAG laser, pulse duration is short than bubble life time making cavitation like bubble while in Er:YAG laser, long pulse duration and high absorption in water drive bubble as a boiling bubble. Detailed motion of bubble and microjet is captured by the high speed camera. So it is observed that microjet characteristics are determined by the bubble behavior. The performance of drug delivery system is evaluated by fluorescent staining of guinea pig skin.

• Journal of ILASS-Korea
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2002

This study describes the external spray characteristics of deflector nozzle such as the breakup procedures of liquid sheet, spray angle, breakup length and bubble behaviors of spray at deflector nozzle. In order to visualize the spray behaviors shadow graphy technique were used. According to the increase injection pressure, deveopment of the spray passes through the dribbling, distoted jet, closed bubble due to the contraction by form a conical sheet like as the simplex swirl atomizer. As trying the analysis of the ratio of bubble length and width it was found that the ratios is comparable. Spray cone angle was nearly $90^{\circ}$.

• Korean Journal of Plant Resources
• /
• v.30 no.5
• /
• pp.549-555
• /
• 2017

The production of ginseng cultivation is decreasing due to shortage of cultivated land and climate change, so additional methods are needed. Therefore, the physiological and morphological characteristics of finebubble were analyzed by applying them to ginseng cultivation which is the representative crop of Korea. The application of fine bubble water to 2 year old ginseng showed that stem length and leaf were increased, and weight increased as main root increased in root. In particular, it is shown that the weight of roots increases with the increase of leaf size. This is because the total chlorophyll content is high and it is judged to be related to the increase of photosynthesis efficiency. When the results of this study were confirmed, it was confirmed that ginseng cultivation using fine bubbles showed no inhibition of growth of ginseng. According to the results of physiological characteristics and subdividing results, It was confirmed that the growth of about 10% to 15% of the growth was increased and that the growth of ginseng was increased by applying the fine bubble when growing ginseng.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1726-1734
• /
• 1993

This paper propose a survivable communication network design process using node degree that augments the usual traffic flow and cost analyses with previously ignored topological survivability and computing time considerations. At first, decide a initial topology, and then measure a throughput of network. If the throughput is smaller than the required traffic, add edge to the optimum place by using minimum node degree and link distance. Otherwise, drop useless edge by using maximum node degree, link distance and link utilization. This process is repeated until throughput equals to the required traffics. This Process designs a survivable communication network with the minimized cost and computing time and usual traffic flow. The design proceses that minimized computing time are freely select initial topology and easily design a large network. And these results of algorithm are compared with the Kris and Pramod's in order to analyses the perfmance of the designed network.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.263-271
• /
• 2016

This study investigated the hydraulic impact scope and dissolved oxygen (DO) concentration distribution by the micro-bubble aeration in the Juksan Lake located in Asan city in Chungcheongnam-do province. A tracing experiment for hydraulic impact scope was used which constituted a 20% rhodamine solution. A 160 m-guideline was installed in the horizontal direction of the micro-bubble jet flow and the rhodamine concentration, water temperature, and DO concentration were measured at depths of 1 m, 2 m, and 3 m at intervals of 10 m. In the Juksan Lake, the effective range of jet flow discharged by the micro-bubble generator was about 40 m, and after then the jet plume moved up to 80 m to 120 m through the advection and diffusion processes of ambient water. DO concentration in the lake was maintained at 7.4-12.6 mg/L during tracking experiment. The DO of the lake sediments improved from 0.2 mg/L to 8.0 mg/L after applying micro-bubble aeration. In conclusion, the micro-bubble aeration can be an effective technology for the management and improvement of water quality in an agricultural reservoir.