• Clean Technology
• /
• v.25 no.1
• /
• pp.19-32
• /
• 2019

As regional air pollution gets worse by the sulfur oxides emitted from various types of vessels passing through the many countries, the International Maritime Organization establishes the emission control areas and regulates sulfur dioxide in those areas. In order to satisfy these regional regulations, the fuel selection method and the exhaust gas post-treatment device are applied to the ships. Due to the economic reasons, the post-treatment method of exhaust gas for reducing the amount of sulfur oxides discharged is mainly preferred. The scrubber which is dominantly used in the ships are the spray type system where the sprayed liquid drops used for capturing the soluble sulfur dioxides in the exhaust gas. The performance of the spray type system depends on the size distribution of the sprayed droplets. In order to evaluate this performance, we designed counterflow type scrubber and cyclone scrubber and evaluated the desulfurization efficiency and the amount of droplet evaporation according to the size of each droplet by using computational fluid dynamics. The Eulerian-Eulerian analysis method was used because the scrubber had a gas-liquid two-phase flow inside the scrubber. When the diameter of the droplet was $100{\mu}m$, $300{\mu}m$, $500{\mu}m$ and $700{\mu}m$. As a result, both of scrubbers showed high desulfurization efficiency and low evaporation amount at $500{\mu}m$ and $700{\mu}m$.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.269-297
• /
• 2021

Bioplastics are attracting attention as a substitute for conventional petroleum-based plastics because they are carbon neutral and can be biodegradable. This study estimated economic and environmental impact of regulating the petroleum-based plastics industry and fostering the bioplastics industry using a Recursive Dynamic CGE Model of the Korean Economy. Results show that the regulation of the conventional plastics industry exhibits a positive environmental impact by reducing greenhouse gases and plastic waste and a negative economic impact with a decrease in GDP. Meanwhile, fostering the bioplastics industry with regulation on conventional plastics industry has similar levels of greenhouse gas and waste reduction effects when there is only regulation on the conventional plastics industry. It is also shown that expanding the production of bioplastics industry offsets existing economic losses as a form of increased GDP. If petroleum-based plastics are replaced through the expansion of bioplastics production, it can contribute to the decoupling of greenhouse gas emissions and plastic waste from economic growth.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.289-295
• /
• 2017

The International Maritime Organization (IMO) in accordance with the regulations with respect to the combustion gases, such as NOx, SOx generated by the marine engine. The combustion gases must be equipped with a device to reduce emissions from all ships passing through the Baltic SECAs. In Korea, the International Maritime Organization (IMO) and the development of a device for NOx, SOx reduction. Scrubber is used in the ammonia water and the Urea solution in the waste water. The waste water containing ammonium nitrate and ammonium sulfate, react of the NOx and SOx gas. In this study, the recovery of by-product, which contains the waste water was used as an organic solvent extraction method of salting out. Ammonium nitrate and ammonium sulfate, the recovery process. A qualitative analysis of the collected by-product FT-IR analysis. Through the elemental analysis and SEM-EDS, characteristic evaluation was performed with an impurity.

• Environmental and Resource Economics Review
• /
• v.21 no.4
• /
• pp.851-891
• /
• 2012

The objective of this study can be presented as follows: First, given the consumption-based carbon accounting method which has now been claimed, this study reviews the emissions within Korea and the resulting position change in international society. Second, when each nation makes efforts to reduce carbon emissions under the Copenhagen Accord, this study, using the Computable General Equilibrium (CGE) model, reviews the resulting carbon leakage and analyzes the effect from the various border adjustment measures. However, reflecting uncertainties in the negotiation processes, this study attempts to apply scenarios with regards to the reduction-mandatory nation group. In addition, this study tries to observe the impact on Korea through testing the various border adjustment measures, including the free allocation and embodied carbon tariffs.

• Environmental and Resource Economics Review
• /
• v.12 no.3
• /
• pp.397-425
• /
• 2003

This paper develops a simple theoretical model that is consistent with the empirical evidence of an inverted U-shpated relationship between pollution and per capita income, which is so-called environmental Kuznets curve in this literature. Also, by incorporating the issue of environmental externality into an endogenous growth model, I investigate the circumstances under which growth can be sustained with the optimal control of pollution, and hence the sustainable development can be achieved. In order to study the problem of implementing the social optimum in a market economy, I examine the optimality of three different kinds of environmental policy instruments; pollution tax, pollution-permit trading system (pollution voucher), and direct regulation. This paper shows that the optimum can be implemented with a pollution tax or with a voucher system. Also, it is shown that the socially optimal rate of pollution tax should increase proportionally to the growth rate of consumption.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.28-28
• /
• 2009

최근 전세계적으로 유가 상승 및 배기가스 배출 저감과 관련된 각종 환경규제에 대응하기 위하여 선진 자동차회사들은 $CO_2$ 배출 저감 기술과 기존 내연기관 차량의 연비향상을 위해 엔진성능 개선, 구동시스템의 최적화, 차량 경량화, 공기저항 감소 등에 초점을 맞춰 차량의 연비향상과 배기가스 규제에 대응하고 있다. 특히, 자동차 중량의 30%를 차지하는 차체의 경량화는 엔진효율을 높여 자동차의 성능향상을 극대화시키고, 그로 인해 연비향상을 도모할 수 있으므로 환경오염 방지와 연료절감에 가장 적합하고 효과적인 방법이다. 이에 기존의 강재에 비해 비중이 낮으면서 유사한 강도와 내식성이 뛰어난 알루미늄 합금의 차체 적용에 대한 연구가 진행되고 있다. 본 연구에서는 자동차 Door에 알루미늄 합금(Al 5052)의 적용 가능성을 판단하기 위해 반응표면분석법(Response surface methodology)을 이용하여 저입열 Pulse MIG 용접 공정변수를 최적화하였다. 첫째, 저입열 Pulse MIG 용접에서 용접 공정 변수(용접전압, 용접속도, Gap)의 변화가 비드 형상에 미치는 영향에 대해 평가하였다. 요인분석법을 이용하여 용접 공정 변수와 비드 형상 변수와의 주효과와 교호작용효과를 분석하였고, 이를 통해 비드 형상 변수에 영향을 크게 미치는 용접 공정변수를 선별하여 다중회귀분석을 통해 용접 공정 변수 변화에 따른 비드형상 예측 회귀모델을 제안하였다. 둘째, 자동차 Door 생산 현장에서 박판 알루미늄 합금 겹치기 용접 이음부의 0~1 mm 갭 발생에 대해 강건한 용접조건을 제시하기 위해 반응표면법(Response surface methodology)을 이용하여 저입열 Pulse MIG 용접 공정 변수를 최적화하였고, 그 적용 가능성을 확인하였다.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.143-157
• /
• 2021

International organizations such as the World Health Organization, the Organization for Economic Development and Cooperation, and major developed countries recognize the seriousness of air pollution. International organizations such as the International Maritime Organization have also implemented various regulations to reduce air pollution from ships. In line with this international trend, the government has also enacted a special law on improving air quality in port areas, and is making efforts to reduce air pollution caused by ports. The purpose of the Special Act is to implement comprehensive policies to improve air quality in port areas. This study sought to identify the emissions of each source of air pollutants originating from the port and prepare basic data on setting the policy priorities. To this end, the analysis was conducted in six categories: ships, vehicles, loading and unloading equipment, railways, unloading/wild ash dust, road ash dust, and the methodology presented by the European Environment Agency(EEA) and the United States Environmental Protection Agency(EPA). The pollutants subject to analysis were analyzed for carbon monoxide(CO), nitrogen oxides (NOX), sulfur oxides(SOX), total airborne materials(TSP), particulate matter(PM10, PM2.5), and ammonia(NH3). The analysis showed a total of 7,122 tons of emissions. By substance, NOX accounted for the largest portion of 5,084 tons, followed by CO (984 tons), SOX (530 tons), and TSP (335 tons). By source of emissions, ships accounted for the largest portion with 4,107 tons, followed by vehicles with 2,622 tons, showing high emissions. This proved to be the main cause of port air pollution, with 57.6% and 36.8% of total emissions, respectively, suggesting the need for countermeasures against these sources.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.126-130
• /
• 2012

Purpose : Methode an effective block was investigated to deal with volatile radioactive gas, short lived radioactive waste generated as a result of the routinely produced radiopharmaceuticals FDG (2-deoxy-2-[$^{18}F$]fluoro-D-glucose) and compound with $^{11}C$. Materials and Methods : All components of the radiation stack monitoring and data management system for continuous radioactive gas detection in the air extract system purchase from fixed noble gas monitor of Berthold company. TEDLAR gas sampling bags purchase from the Dongbanghitech company. TEDLAR gas sampling bags (volume: 10 L) connected via paraflex or PTFE tubing and Teflon 3 way stopcock. When installing TEDLAR gas sampling bags in Hot cell on the inside and not radioactive gas concentrations were compared. According to whether the Hot cell inside a activated carbon filter installed, compare the difference in concentration of the radioactive gas $^{18}F$. Comparison of radiation emission concentration difference of module a FASTlab and TRACElab. Results : Activated carbon filter are installed in the Hot cell, a measure of the concentration of radioactive gas was 8 $Bq/m^3$. Without activated carbone filter in the hot cell was 300 $Bq/m^3$. Tedlar bag prior to installation of the radioactive gases a measure of the concentration was 3,500 $Bq/m^3$, $^{11}C$ synthesis of the measured concentration was 27,000 $Bq/m^3$. After installed a Tedlar bag and a measure concentration of the radioactive gases was 300 $Bq/m^3$ and $^{11}C$ synthesis was 1,000$Bq/m^3$. Conclusion : $^{11}C$ radioactive gas that was ejected out of the Hot cell, with the use of a Tedlar gas sampling bag stored inside. A compound of 11C is not absorbed onto activated carbon filter. But can block the release out by storing in a Tedlar gas sampling bag. We was able to reduce the radiation exposure of the worker by efficient radiation protection.

• Journal of the Korean association of regional geographers
• /
• v.19 no.2
• /
• pp.301-323
• /
• 2013

The government of the UK since the 1990, especially under the new Labour Party, has pursued sustainable development or carbon control as a core strategy for its national development. The seemingly prominent environmental policy for 'greening the government' of the UK as well as considerable achievements in energy and environment indices have attracted much attentions of policy makers and researchers for the 'low carbon green growth' in Korea. This paper tries to see the character of carbon control and environmental policy in the UK not merely as the integrating or mainstreaming policy but a new strategy for national development, that is, for the 'ecologically modernized' state, eco-state, or green state. It defines the environmental policy for carbon control in the UK as the strategy for the green state which has provided it as a principal guide for integrating national policies as a whole, and which has pursued it through market-dependent neoliberal measures. From this point of view, this paper introduces the development process of carbon control and environmental policy mainly under the new Labour Party government in the UK, and gives a reappraisal of both its policy and of energy-environment indices.

• Environmental and Resource Economics Review
• /
• v.16 no.1
• /
• pp.129-169
• /
• 2007

The purpose of this study is to experiment and simulate the newly-updated Second Generation Model for Korea (SGM-Korea). With the updated model, we tried to simulate effect of carbon tax on $CO_2$ emissions and other macroeconomic variables for Korea. The baseline data are compared with projected profiles by various scenarios to evaluate its performance. Our contribution in this study is to having up-graded the model from its earlier version by building new hybrid input-output table based on 2000 input-output and energy balanced tables. According to our estimation, total $CO_2$ emission in Korea has already increased in 2000 to about 1.86 times the 1990 figure. The level of carbon tax required for the current level of $CO_2$ emission to be reduced to the 1995 or 2000 level seems to be too high for Korean economy to bear. It is possible to find a reasonable level of carbon tax, however, if it can combine it with improvement of energy efficiency at the rate of 0.5% to 1% per year. For Korea to meet its obligation to reduce $CO_2$ emissions, therefore, it is imperative for her to improve energy efficiency as well as to develop alternative energy source reducing its dependence on fossil fuel.