• Composites Research
• /
• v.17 no.5
• /
• pp.25-38
• /
• 2004

In this study, the stiffness of spatially reinforced composites (SRC) are predicted by using superposition of a rod and matrix stiffnesses in an arbitrary direction. To confirm the predicted values, the material properties of SRC are measured. The predicted values from the volume average of stiffness matrix are consistent with the tested values in a rod direction, but are inconsistent in an off-rod direction while reverse is true fur the volume average of compliance matrix. Therefore, the harmony function from superposition of stiffness and compliance matrix is introduced. The predicted values from the harmony function are consistent with the tested values in both the rod and the off-rod directions.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.49-55
• /
• 2011

A Direction Cosine Matrix (DCM) of each satellites sensor/actuator which contains an directional information of sensor/actuator is implemented in the on-board flight software. In order to verify the polarity of direction cosine matrix, it is mostly used that an actual sensor/actuator output is compared with the expected output value which responses to the pre-defined external stimulus to the sensor/actuator. For the gyro sensors, the Earth rotational rate can be used as an external input for the polarity verification of DCM, without using an artificial stimulus. In this study, the polarity of gyro DCM is checked and verified using the several test data which have been acquired during the different system level test phases. Finally the polarity of DCM was successfully verified using the Earth rotational rate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.871-873
• /
• 2005

최근 프로젝터를 기반으로 사용자가 원하는 위치에 영상을 제공하기 위한 많은 연구가 진행중에 있다. 프로젝터는 투사 방향이 정확하지 않으면 영상왜곡이 발생되며, 영상왜곡은 일반적으로 기하보정 변환행렬을 사용하여 보정한다. 기존의 연구는 선행작업으로 그물형태의 점을 투사하거나 또는 특정 마커를 설치해서 기하보정 변환행렬을 계산한다. 이 방법들은 투사방향이 변화될 때 마다 선행작업을 요구하므로 실시간 기하보정을 수행할 수 없다. 본 논문은 투사방향이 변화될 때에도 기하보정 변환행렬을 동시에 계산하여 보정된 영상을 제공하는 실시간 기하보정 시스템을 제안한다. 우리의 시스템은 웹카메라를 사용하여 실시간으로 기하보정 변환행렬을 계산하여, 다이렉트쇼(Directshow) 기술을 사용하여 동영상 프레임을 추출하고, 추출된 프레임이미지를 기하보정 변환행렬을 사용하여 워핑(warping) 함으로써 수행한다.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.672-680
• /
• 2010

This paper presents an adaptive quantization matrix selection scheme for H.264 video encoding. Conventional H.264 coding standard applies the same quantization matrix to the entire video sequence without considering local characteristics in each frame. In this paper, we propose block adaptive selection of quantization matrix according to edge directivity of each block. Firstly, edge directivity of each block is determined using intra prediction modes of its spatially adjacent blocks. If the block is decided as a directional block, new weighted quantization matrix is applied to the block. Otherwise, conventional quantization matrix is used for quantization of the non-directional block. Since the proposed weighted quantization is designed based on statistical distribution of transform coefficients in accordance with intra prediction modes, we can achieve high coding efficiency. Experimental results show that the proposed scheme can improve coding efficiency by about 2% in terms of BD bit-rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.648-654
• /
• 2009

In this paper, a method called bilateral diagonal 2DLDA is proposed for face recognition. Two methods called Dia2DPCA and Dia2DLDA were suggested to reserve the correlations between the variations in the rows and columns of diagonal images. However, these methods work in the row direction of these images. A row-directional projection matrix can be obtained by calculating the between-class and within-class covariance matrices making an allowance for the column variation of alternative diagonal face images. In addition, column-directional projection matrix can be obtained by calculating the between-class and within-class covariance matrices making an allowance for the row variation in diagonal images. A bilateral projection scheme was applied using left and right multiplying projection matrices. As a result, the dimension of the feature matrix and computation time can be reduced. Experiments carried out on an ORL face database show that the proposed method with three different distance measures, namely, Frobenius, Yang and AMD, is more accurate than some methods, such as 2DPCA, B2DPCA, 2DLDA, etc.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.403-408
• /
• 2005

The techniques of estimating angle of arrival(AOA) have played a key role for enhancement of wireless communications using array antennas. Among those techniques, the superresolution algorithms, such as MUSIC and ESPRIT, calculate the covariance matrix of the array output vectors which are observed at the array antennas, and then by using eigen-decomposition of the covariance matrix, they estimate AOAs of the received signals with high accuracy. However, superresolution algorithms based eigenvalue decomposition fails to estimate AOAs under multipath environments. Under multipath environments, it is difficult to estimate AOAs of the received signals due to coherency and high-correlation. To resolve coherent signals, the covariance matrix is calculated by using the conventional spatial smoothing technique, and then the techniques based on eigen-descomposition is applied. The result of the conventional spatial smoothing technique, however, is obtained at the cost of losing effective spatial aperture. Moreover, the conventional technique ignores any information in the cross-correlations of the array outputs the subarrays. As the result, the performance for AOA estimation is degraded. In this paper, we propose a new spatial smoothing technique, which consider the cross-correlation for subarrays. By computer simulation, the AOA estimation performance of the proposed method is compared with the conventional method and evaluated.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.22-29
• /
• 1997

본 기사에서는 경사케이블의 자중의 현 방향성분을 고려하여 케이블의 동적 강성 행렬을 유도하였다. 이 동적 강성 행렬로부터 부재 자체의 동적특성을 자세히 파악할 수 있을 뿐만 아니라 다른 구조물과 결합되었을 경우 동해석에 소요되는 시간을 대폭적으로 줄일 수 있고 거동을 예측할 수 있다는 장점이 있다. 유도된 동적 강성값을 다른 연구결과와 비교해본 결과, 실 구조물의 부재롤 사용되는 경사 케이블은 중량이 비교적 크기 때문에 현 방향 자중성분을 무시할 수 없으며 항상 복합 모드 현상을 보인다는 것을 알았다. 또한 이러한 복합 모드형성으로 인해 경사 케이블의 동적 강성값은 기존의 동적 강성값보다 좀 더 큰 값을 보인다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.623-631
• /
• 2001

본 논문에서는 등간격 선형어레이로 입사한 인코히어런트신호의 도래각을 추정하기 위하여 행렬특성매핑을 기본으로 한 알고리듬을 제안한다. 알로리듬의 기본 개념은 공분산 행렬 초정값과 Frobenius norm 면에서 가장 가까운 공분산 행렬 (혹은 스펙트럼 밀도행렬)을 찾는 것이다. 제안된 알고리듬의 우수한 성능을 보여주기 위하여 협대역 신호인 경우에는 MUSIC과 광대역 신호인 경우에는 CSM-MUSIC과 컴퓨터 시뮬레이션을 통하여 통계적 성능을 비교하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.619-627
• /
• 2015

This paper presents a speech enhancement method using non-negative matrix factorization (NMF). In the training phase, each basis matrix of source signal is obtained from a proper database, and these basis matrices are utilized for the source separation. In this case, the performance of speech enhancement relies heavily on the basis matrix. The proposed method for which speech basis matrix is made a high reconstruction error for noise signal shows a better performance than the standard NMF which basis matrix is trained independently. For comparison, we propose another method, and evaluate one of previous method. In the experiment result, the performance is evaluated by perceptual evaluation speech quality and signal to distortion ratio, and the proposed method outperformed the other methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.398-403
• /
• 1996

이 논문에서는 지반과 기초를 일반적인 3차원 유한요소로 모델링하고, 유한요소의 바깥영역은 일반적인 모드의 축대칭 유한요소와 축대칭 Hyperelement를 사용하여 전달경계로 모델링하여, 유한요소와 전달경계의 경계에서 두 요소간의 연계에 의하여 기초에서의 동적강성행렬을 구한다. 이를 위하여 3차원 유한요소와 축대칭 요소간의 연계방법을 제안한다. 제시되는 기초의 동적강성행렬은 x,y,z방향의 병진성분과 x,y,z축에 관한 회전성분의 6자유도로 표현된다. 이 논문에서 사용한 3차원 유한요소와 축대칭 요소의 연계 방법의 검증을 위하여 구형기초와 등가의 강성을 갖는 강체원형기초의 동적강성행렬을 구하고 이를 비교하였다.