• Journal of Life Science
• /
• v.25 no.7
• /
• pp.795-800
• /
• 2015

Oyster is a nutritionally good food ingredient. Also, oyster is used to make source for taste and flavor. This study tried to investigate optimal condition of hydrolysis of oyster and oyster cooking drip for better amino acid content to make good taste and flavor. And then this study characterized hydrolysate of oyster and oyster cooking drip. Enzymes are Acalase, Flavourzyme, Neutrase, and Protamax. The optimal condition for the highest enzyme activity is given by the company. Under the best condition of each enzymes, they react with the homogenized oyster and oyster cooking drip for 0.5, 1.0, 1.5, 2, 4, 6 hr. The degree of oysters’ hydrolysis is 13.2±0.1%. But, in the case of using enzyme, the rate of hydrolysis sharply increased as time went on during 2 hr. After 8 hr, the rate is 36.9~40.5%. Protamax showed 27.4±0.4% of hydrolysis rate in 2 hr. And the degree of oyster cooking drop hydrolysis is 42.7±0.1%. The highest of hydrolysate concentration is 72.1±0.1% using protamax. In the case of oyster, it has a similar tendency of all enzymes. Otherwise, the hydrolysate of oyster cooking drip had a difference among the enzymes. Composition of free amino acid of hydrolysate using protamax was investigated how much time showed highest rate of hydrolysis to find best amino acid composition. Hydrolysis using Protamax during 6 hr is selected for best condition.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.74-83
• /
• 2017

This study was conducted to obtain the optimal conditions of hot air drying for Cudrania tricuspidata by response surface methodology (RSM). The independent variables were blanching time (60, 120, 240 sec), drying temperature (40, 60, $80^{\circ}C$) and drying time (12, 24, 36 h). The dependant variables were total polyphenol content (TPC), total flavonoid content (TFC), DPPH radical scavenging activity (DPPH), and color difference (${\Delta}E$). Viable cell colony was counted according to changes of blanching time. It was confirmed that microorganisms gradually decreased with increasing blanching time. From RSM results, the predicted values of TPC, TFC, DPPH, and ${\Delta}E$ were 8.62 mg GAE/g, 56.65 mg RE/g, 40.26% and 11.69, respectively. Experimental values within the optimal range (240 sec, blanching time; $60^{\circ}C$, drying temperature; 24 h, drying time) were 10.06 mg GAE/g, 49 mg RE/g, 44.99% and 10.53, respectively. The predicted values were similar to the experimental values. Comparing drying tendency according to changes of blanching time, moisture reduction was bigger in the blanched sample than that in control at $40^{\circ}C$. However, the differences between blanched and control decreased with increase of drying temperature. Viable cell gradually decreased as increasing blanching time.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.611-617
• /
• 2005

Dispersed repetitive DNA elements in genomes of microorganisms differ among and within species. Because distances between repetitive sequences vary depending on bacterial strains, genomic fingerprinting with interspersed repetitive sequence-based probes can be used to distinguish unrelated organisms. Among well-known bacterial repetitive sequences, Repetitive Extragenic Palindromic (REP) sequence has been used to identify environmental bacterial species and strains. We applied REP-PCR to detect and differentiate four major Gram-negative food-borne bacterial pathogens, E. coli, Salmonella, Shigella, and Vibrio. Target DNA fragments of these pathogens were amplified by REP-PCR method. PCR-generated DNA fragments were separated on 1.5% agarose gel. Dendrograms for PCR products of each strain were constructed using photo-documentation system. REP-PCR reactions with primer pairs REP1R-I and REP2-I revealed distinct REP-PCR-derived genomic fingerprinting patterns from E. coli, Salmonella, Shigella, and Vibrio. REP-PCR method provided clear distinctions among different bacterial species containing REP-repetitive elements and can be widely used for typing food-borne Gram-negative strains. Results showed established REP-PCR reaction conditions and generated dendrograms could be used with other supplementary genotyping or phenotyping methods to identify isolates from outbreak and to estimate relative degrees of genetic similarities among isolates from different outbreaks to determine whether they are clonally related.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2019

In today's global energy market, the importance of green energy is emerging. Hydrogen energy is the future clean energy source and one of the pollution-free energy sources. In particular, the fuel cell method using hydrogen enhances the flexibility of renewable energy and enables energy storage and conversion for a long time. Therefore, it is considered to be a solution that can solve environmental problems caused by the use of fossil resources and energy problems caused by exhaustion of resources simultaneously. The purpose of this study is to efficiently produce hydrogen using plasma, and to study the optimization of DME reforming by checking the reforming reaction and yield according to temperature. The research method uses a 2.45 GHz electromagnetic plasma torch to produce hydrogen by reforming DME(Di Methyl Ether), a clean fuel. Gasification analysis was performed under low temperature conditions ($T3=1100^{\circ}C$), low temperature peroxygen conditions ($T3=1100^{\circ}C$), and high temperature conditions ($T3=1376^{\circ}C$). The low temperature gasification analysis showed that methane is generated due to unstable reforming reaction near $1100^{\circ}C$. The low temperature peroxygen gasification analysis showed less hydrogen but more carbon dioxide than the low temperature gasification analysis. Gasification analysis at high temperature indicated that methane was generated from about $1150^{\circ}C$, but it was not generated above $1200^{\circ}C$. In conclusion, the higher the temperature during the reforming reaction, the higher the proportion of hydrogen, but the higher the proportion of CO. However, it was confirmed that the problem of heat loss and reforming occurred due to the structural problem of the gasifier. In future developments, there is a need to reduce incomplete combustion by improving gasifiers to obtain high yields of hydrogen and to reduce the generation of gases such as carbon monoxide and methane. The optimization plan to produce hydrogen by steam plasma reforming of DME proposed in this study is expected to make a meaningful contribution to producing eco-friendly and renewable energy in the future.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.83-89
• /
• 2011

Various functional and useful components in Portulaca oleracea were extracted with ethanol and the optimum solvent conditions were set by monitoring of response surface methodology(RSM). A central composite design for optimization was applied to investigate the effects of the three independent variables of extraction temperature, ethanol concentration, and extraction time, on dependent variables including total phenolics, electron-donating ability, brown clolor and total flavonoids of Portulaca oleracea. The content of total phenol was essentially unaffected by extraction time or extraction temperature, but it was highly influenced by ethanol concentration. The maximum total phenol content was 31.70mg/mL obtained at 45.84% of ethanol concentration, $79.66^{\circ}C$, and after 2.67hr of extraction. Electron-donating ability (EDA) was affected by ethanol concentration and the maximum EDA was 74.67mg/mL at 52.95% ethanol concentration, $52.33^{\circ}C$ and 4.84hr of extration time. The browning color was rarely affected by extraction time but, it was highly influenced by ethanol concentration and extraction temperature. The maximum extent of browning color was obtained at 97.75% of ethanol concentraion, $65.88^{\circ}C$ and 2.93hr of extraction time. The content of total flavonoid was significantly influenced by extraction time, and the maximum total flavonoid level was 58.28mg/mL obtained at 96.62% ethanol concentration, $61.87^{\circ}C$ after 3.70hr of extraction. As a result, The optimal conditions for effective extraction were predicted as follows, 70.3% of ethanol concentration, $62.1^{\circ}C$ of extraction temperature and 3.3hr of extraction time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7754-7760
• /
• 2015

The outer tie rod is one of the part of steering system, the optimization process was executed to find the lightweight design. The inner tie rod was considered in the optimum design of an outer tie rod. it could be closer to the test condition than in the case of considering outer tie rod only. The aluminum forging material was considered as a weight reduction proposal. The target of optimization was the shape of the minimum weight to resist at the load of buckling. RSM and Kriging interpolation method were applied as a optimization method to consider the nonlinear shape optimization problem. Then, 16.3%, 16.6% of weight reduction was obtained from the result comparing with that of the initial model. The results of meta model optimization was compared with that of finite element method. The error values of buckling load estimation were 2.6%, 2.04%. and those of weight estimation were 0.17%, 0.13%. Therefore, it seemed that the result of Kriging model could be obtained closer to optimum value than that of RSM model.

• KSBB Journal
• /
• v.25 no.4
• /
• pp.337-343
• /
• 2010

It has been well known that organic solvents like t-butanol and n-hexane can protect lipases from the inhibition by short-chain alcohols in the enzymatic transesterification. However, use of the organic solvents should be minimized considering their negative effects on environment and human health. Therefore, use of the greener solvents has been pursued in various are as including the enzymatic biotranformation. In this study, the liquid carbon dioxide ($LCO_2$) was employed as an alternative media for the enzymatic transesterification of canola oil. The conversion in the $LCO_2$ was comparable with those in organic solvents and the supercritical carbon dioxide, and under optimum conditions, the value reached 99.7%. It is expected that this method can provide a new type of biodiesel production process with higher energy efficiency and lower environmental impact.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.345-350
• /
• 2007

This study was carried out to establish the optimal preparation conditions of yoghurt made from goat milk with reduced goaty flavor by adding citrus concentrate and flavor. A central composite design was applied to investigate the effects of citrus concentrate ratio (0.5, 1.0, 1.5, 2.0, 2.5%), citrus flavor ratio (0.01, 0.02, 0.03, 0.04, 0.05%) and fructose ratio (3, 4, 5, 6, 7%). The physico-chemical and sensory characteristics of the sixteen yoghurt samples were compared. The addition of citrus concentrate had a significant (p<0.01) effect on the pH, $a^*,\;and\;b^*$ values. Regarding organoleptic properties, the addition of citrus concentrate had a significant (p<0.01) effect on color, and fructose had an effect on overall palatability. The maximum value of organoleptic goaty flavor was 2.35, more than double the minimum value. The optimum conditions predicted for minimizing goaty flavor of the yoghurt were 1.44% citrus concentrate, 0.0357% citrus flavor, and 6.91% fructose.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.2
• /
• pp.31-38
• /
• 2021

The aim of this study is to evaluate the possibility of treating slaughterhouse by-products using microbial electrolysis cells (MECs). The diluted pig liver was fed to MEC reactors with the influent COD concentrations of 772, 1,222, and 1,431 mg/L, and the applied voltage were 0.3, 0.6, and 0.9 V. The highest methane production of 5.9 mL was obtained at the influent COD concentration of 1,431 mg/L and applied voltage of 0.9 V. In all tested conditions, COD removal rate was increased as the influent COD concentration increased with average removal rate of 62.3~81.1%. The maximum methane yield of 129~229 mL/g COD was obtained, which is approximately 80% of theoretical maximum value. It might be due to the bioelectrochemical reaction greatly increased the biodegradability of pig liver. Future research is required to improve the methane yield and digestibility through optimizing the reactor design and operating conditions.