• 한국해양학회지
• /
• v.28 no.1
• /
• pp.17-23
• /
• 1993

A right cylindrical tank with sloping bottom and top (${\beta}-effect$) is filled with two-layered fluid and is put on the rotating table. External fluid of same density as the lower-layer fluid is continuously injected to drive the lower-layer current. By minimizing the interfacial stress between two layers the motion in the lower-layer deformed the shape of interface such that the upper-layer adjust itself to the variations of the interface in terms of its direction of flow patterns .The most significant parameter is the internal Froude Number($F_1$) and when $F_1$ is greater than 6 two-cellular circulation of the upper-layer changes its direction, there by creates a separation of Western boundary current. The separation position moves to the most northward when $F_1$ equals to 6.

• Journal of Music and Human Behavior
• /
• v.18 no.1
• /
• pp.1-27
• /
• 2021

The purpose of this study was to investigate how primary caregivers of children with developmental disabilities aged 6 to 18 years perceived on tele-music programs in which their children participated during COVID-19. A total of 83 caregivers who voluntarily agreed to participate in this study responded to a survey either on-line or in person and 67 questionnaires were included in the final analysis after deleting 16 incomplete responses. The results showed that tele-music programs were rated somewhat suitable for distance learning but that there was still a need for adult assistance to help children with developmental disabilities participate in the program. When comparing the perceptions of caregivers who participated in remote general education versus who participated in tele-music program, significantly higher level of program engagement and positive responses from a child were perceived with tele-music program. The caregivers who participated in tele-music program showed significantly greater willingness to participate in tele-music therapy in the future than those who did not. The findings of this study presents information on how tele-music therapy has been implemented to children with disabilities and what can be considered for the the development of a tele-music therapy program.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2011

Activation foil-based Bonner sphere spheres are used to obtain neutron energy spectra of nuclear power plants or accelerator-produced neutrons. The position and the foil mass dependence of response functions should be studied carefully before measurement of Bonner spheres. This study showed that the normal incidence to the foil surface made a large shift of responses while parallel and isotropic incidence made no position dependence. The correlation between foil mass and response was not linear. Therefore, the response functions of activation-foil based Bonner spheres should be calculated for every different foil mass and the direction of Bonner spheres for parallel incidence will be preferred for radioactive neutron source or accelerator target produced neutrons.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.225-229
• /
• 2004

The effect of the silicon acrylate as a reactive additive on the UV-curing photopolymerization reaction was studied by micro raman technique. For the study, acrylate systems and Darocur 1173 were used as oligomer and monomers, and a photo initiator, respectively. The content of silicon acrylate was within the range of 0-3 wt%. The extent of photo-polymerization reaction as a function of depth from the air interface was obtained from the conversion ratio of acrylate double bond calculated from the intensities of measured bands at $1410cm^{-1}$ and at $1635cm^{-1}$. Micro raman spectroscopic technique can be an useful tool for the investigation of the factors, which can affect the reaction progress, such as oxygen inhibition, composition of the formulations, depth, etc.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.99-110
• /
• 1995

치주치료의 궁극적 목표인 치주조직 재생에 대한 관심이 높아지는 가운데 치주조직 재생에 주된 역할을 하는 치주인대세포와 치근면 탈회에 의한 신부착 효과에 관한 많은 연구가 시도되고 있다. 그러나 광범위한 연구에도 불구하고 어떤 치근면 처리가 신부착 형성에 가장 효과적인지는 아직 논란의 대상으로 남아있다. 이에 저자는 결합조직 부착에 의한 재생에 필수적인 치은 및 치주인대 섬유아세포의 부착 및 증식을 tetracycline-HCL(TC)과 citric acid(CA)로 각각 처리된 상아질 표면에서 비교관찰하여 치주조직 재생에의 기여도를 추정하기 위해 본 연구를 시행하였다. 교정치료를 위하여 본원에 내원한 환자의 제일 소구치의 건강한 치은조직을 채취하고, 발치 후 효소처리에 의한 치주인대세포를 얻은 후 각각 세포배양하였다. 상아질 절편은 $3{\times}3{\times}0.2mm^3$로 준비하고 TC과 CA처리군으로 나눈 후 각각 치은 및 치주인대 섬유아세포를 부착시키고 초기부착은 8시간까지, 증식은 7일까지 고나찰하여 다음의 결과를 얻었다. 1. 각 군의 세포 부착은 시간이 지남에 따라 증가되었다. 2. 모든 군에서 7일째 빠른 증식상을 보였다. 3. 초기 부착시 치은과 치주인대 섬유아세포의 반응에는 유의한 차이가 없었다. 4. 반면에 치은과 치주인대 섬유아세포는 증식속도에서 차이를 나타내었으며 치은 섬유아세포가 좀 더 빠른 성장을 보였다. 5. 치근면 탈회에 따라 초기부착과 증식상에서 모두 유의성 있는 증가를 보였다. 6. CA는 초기부착에서, TC는 증식장에서 더욱 효과적으로 작용했다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.34-41
• /
• 1984

MOEN/MO double layer which is to be used It)r the RMOS (refractory metal oxide semiconductor) gate material has been fabricated by means of low temperature reactive sputtering in N2 and Ar mixture. Good Mo2N film was obtained in the volumetric mixture of Ar:N2=95:5. The sheet resistance of the fabricated Mo7N film was about 1.20 - 1.28 ohms/square, which is about an order of magnitude lower than that of polysilicon film, and this would enable to improve the operational speed of devices fabricated with this material. When PSG (phosphorus silicate glass) was used as impurity diffusion source for the source and drain of the RMOSFET in the N2 atmosphere at about 110$0^{\circ}C$, the Mo2N was reduced to Mo resulting in much smaller sheet resistance of about 0.38 ohm/square. The threshold voltage of the RMOSFET fabricated in our experiment was - 1.5 V, and both depletion and enhancement mode RMOSFETs could be obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.625-630
• /
• 2013

The friction behavior of a 60-${\mu}m$-thick anodic aluminum oxide (AAO) film having cylindrical nanopores of 45-nm diameter was investigated as a function of impregnated oil viscosity ranging from 3.4 to 392.6 cSt. Reciprocating ball-on-flat sliding friction tests using a 1-mm-diameter steel ball as the counterpart were carried out with normal load ranging from 0.1 to 1 N in an ambient environment. The friction coefficient significantly decreased with an increase in the oil viscosity. The boundary lubrication film remained effectively under all test conditions when high-viscosity oil was impregnated, whereas it was easily destroyed when low-viscosity oil was impregnated. Thin plastic deformed layer patches were formed on the worn surface with high-viscosity oil without evidence of tribochemical reaction and transfer of counterpart material.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.120-126
• /
• 2004

A damage-reduced trench was investigated in view of the defect distribution along trench sidewall and bottom using high resolution transmission electron microscopy, which was formed by HBr plasma and additive gases in magnetically enhanced reactive ion etching system. Adding $O_2$ and other additive gases into HBr plasma makes it possible to eliminate sidewall undercut and lower surface roughness by forming the passivation layer of lateral etching. To reduce the RIE induced damage and obtain the fine shape trench corner rounding, we investigated the hydrogen annealing effect after trench formation. Silicon atomic migration on trench surfaces using high temperature hydrogen annealing was observed with atomic scale view. Migrated atoms on crystal surfaces formed specific crystal planes such as (111), (113) low index planes, instead of fully rounded comers to reduce the overall surface energy. We could observe the buildup of migrated atoms against the oxide mask, which originated from the surface migration of silicon atoms. Using this hydrogen annealing, more uniform thermal oxide could be grown on trench surfaces, suitable for the improvement of oxide breakdown.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.394-399
• /
• 2000

The effects of the type and thickness of underlayer on the crystallographic texture and the sheet resistance of aluminum thin film were studied. Ti and Ti/TiN were examined as the underlayer of aluminum. Ti and TiN were prepared by ionized physical vapor deposition (I-PVD) metalorganic chemical vapor deposition (MOCVD), respectively. The texture and the sheet resistance of metal thin film stacks were investigated at various thicknesses of Ti or TiN, and the sheet resistance was measured after annealing at $400^{\circ}C$ in an nitrogen ambient. For I-PVD Ti underlayer, the excellent texture of aluminum <111> was obtained even at top of 5 nm of Ti. However, the sheet resistance of the metal stack was greatly increased after annealing due to the interdiffusion and reaction of Al and Ti. MOCVD TiN between Ti and Al could suppress the Al-Ti reaction without severe degradation of aluminum <111> texture. Excellent texture of aluminum was obtained for the MOCVD TiN thinner than 4 nm.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.352-356
• /
• 2014

PDMS modified epoxy resin with epoxy group (EMPDMS) was prepared from the reaction of ${\alpha},{\omega}$-aminopropylpolydimethylsiloxane and diglycidyl ether of bisphenol-A (DGEBA) based epoxy resin, and PDMS modified epoxy hybrid compound (EMPDMSH) was prepared by introducing alkylesteraminopropyl alkoxy silane to EMPDMS. Their structures were characterized using FT-IR, $^1H$-NMR and $^{29}Si$-NMR. Coating materials were prepared by mixing EMPDMSH base and solvent. Physical properties of the coating materials coated on epoxy/glass fiber composite film were measured according to the content of PDMS in EMPDMSH. Contact angle of coating film was increased 30 to 71 degree. Adhesive property of coating film was 5B degree better then epoxy or acrylate coating materials, and surface roughness was decreased as increasing in EMPDMSH.