• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2453-2458
• /
• 2007

The performance of polysilicon thin film transistor (p-Si TFT) has an important role in the operation of active matrix liquid crystal displays. To fabricate the p-Si TFTs that have uniform characteristics, understanding of the recrystallization mechanism of silicon is crucial. Especially, the analysis of the transient temperature variation and the liquid-solid interface motion is required to find the mechanism. The thermal conductivity is one of the most important parameters to understand the mechanism. In this work, a KrF eximer laser beam was irradiated to amorphous silicon thin films. We measured the transient reflectivity at the wavelength of 633 nm. We carried out the numerical simulation of one dimension conduction equation so that we determined the most well-fitted thermal conductivity by comparing the numerically obtained transient reflectivity with the experimentally measured one. The experimentally determined thermal conductivity of amorphous silicon thin films is 1.5 W/mK.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.127-134
• /
• 2014

본 연구에서는 X-밴드 taper 슬롯구조 능동위상 배열 안테나를 구현하였으며, 구현한 안테나의 성능을 해석하고 측정을 통하여 분석하였다. 제작된 광대역 위상배열 안테나의 능동반사계수 및 능동복사패턴을 측정한 결과를 통하여 설계된 위상배열 안테나의 능동반사계수 및 능동복사패턴 결과와 일치함을 확인하였고, 안테나의 광대역 빔 특성을 검증하여 설계 목표에 부합하는 안테나 구조를 제안하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.193.1-193.1
• /
• 2016

본 연구에서 개발된 새로운 유형의 마이크로파 대기압 플라즈마 공진기는 전송선로 이론을 기반으로 하여 임피던스 값을 $50{\varphi}$으로 설계함으로써 장비 자체에 구조적인 매칭이 이루어지도록 구성하였다. 안정적인 마이크로파 대기압 플라즈마 발생을 위해 컴퓨터 시뮬레이션(HFSS, High Frequency Structural Simulator)을 이용하여 공진기의 반사계수, 공명주파수, 급전점 그리고 전기장을 계산하였다. 전송선로의 이론에서 구한 급전점과 실제 제작한 마이크로파 대기압 플라즈마 공진기의 급전점 값이 큰 차이가 없음을 확인하였다. 이를 바탕으로 제작한 공진기는 급전점 5.6 mm에서 공명주파수는 0.89 GHz, 반사계수는 -37.5 dB임을 측정하였고 신호가 입사되는 정도는 90 % 이상인 것을 확인하였다. 공진기에서 발생된 플라즈마는 6 W의 정도의 저 전력으로 발생되었으며 기체유량과 인가전력에 따른 플라즈마의 기체온도를 측정하고 광 방출 특성을 고찰하였다. 실제 제작한 마이크로파 대기압 플라즈마 발생장치는 생의학적 응용을 포함한 여러 넓은 분야에서 활용될 전망이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.625-628
• /
• 2005

Silencers are extensively used for reducing noise in an exhaust system of internal combustion Engine and fluid machineries. The prediction and measurement of the transmission loss as the acoustic performance of silencers are important in early design stage. In the measurement of transmission loss, the semi-anechoic terminations are general used for reducing unwanted effects by reflecting wave. However it is very hard to remove reflecting wave perfectly. So the research about the error made by reflecting wave is important. The analysis about errors made by reflections and modification techniques are proposed. For an application example, the diesel particulate filter (DPF) is chosen. The transmission loss of DPF is measured with and without considerations of reflecting wave.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.18-24
• /
• 2011

In this study, the reflection of the L(0,2), axially symmetric guided elastic wave from defects in pipes above ground is examined using finite element method. Phase and group velocity dispersion curves for the pipe were presented for the selection of the excitation mode. Some simple signal processing was applied to determine the amplitude of each of the reflected waves and to calculate the reflection coefficient. The results show the reflection coefficient of this mode is very close to a linear function of the circumferential extent of the defect. The motivation for the work was the development of a technique for inspecting chemical plant pipelines, but the study addresses the nature of the reflection function and its general applicability.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.138-143
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial applications with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristcs of the pulse echo effects according to various change in welding conditions. This paper presents an attempt to determine the relationship between the varios welding conditions and the coefficients of reflection using the ultrasonic pulse echo method in dissibilar metals friction weld. The new approach of calculating the coefficients of reflection based on measured amplitudes of the echoes is applied in this paper. These coefficients provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitave relationship between welding conditions and the coefficients of reflection using the ultrasonic pulse echo exists in dissimilar metals friction weld.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.505-510
• /
• 2002

The attenuation of waves transmitted through non-conservative joints that are shown in many paractical structures, is affected by the impedance and the orientation of the joint. In this paper, the joints between plate structures are assumed to be modeled as linear spring-dashpot systems and the transmission and reflection of vibration energy in the medium to high frequency ranges are investigated. The calculated power transmission and reflection coefficients are applied to the PFA method for the prediction of energy density and intensity in structures.

• 한국통신학회논문지
• /
• 제39A권9호
• /
• pp.560-562
• /
• 2014

국내 이동통신 주파수를 모두 수용할 수 있는 광대역분배기를 설계 및 제작하였다. 제작한 20W급 광대역분배기는 810 ~ 2620MHz의 동작주파수에서 삽입손실은 최대 3.49dB, -18.48dB 이하의 입력반사계수, -20.2dB 이하의 출력반사계수, 24.7dB 이상의 격리도 그리고 3차 PIMD(Passive Intermodulation Distortion)는 -141.2dBc의 성능을 갖는다.

• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.33-39
• /
• 2005

동축선 프로브법을 사용하여 매질의 광대역 복소 유전율 값을 얻는다. 신뢰할 수 있는 복소 유전율 분포를 얻기 위해서는 먼저 측정된 반사계수의 정확성과 환산 모델의 안정성이 보장되어야 한다. 본 논문에서는 서로 다른 uncertainty를 갖는 계측기를 사용하여 환산 모델의 민감도를 해석하였다. 그리고 측정된 반사계수의 정확성에 영향을 주는 여러 요인에 대해 측정을 통해 조사하였다.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1131-1136
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wane and incident wave, the causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function In the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model.