• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.91-97
• /
• 2014

In this research, we would try to evaluate the applicability in cadastral resurvey surveying by analysing the accuracy of building boundary surveying using the reflective sheet total station surveying. When we analyse it, we refer the reflective sheet which can supplement not only the difficulties of total station surveying and GPS surveying caused by the diversity of the building structure but also the errors of non prism total station caused by material of the object. Each reflected angles $90^{\circ}$ and $60^{\circ}$, $30^{\circ}$ of RMSE results were analyzed by RMSE between 1.2mm~2.8mm and 2.2mm~4.0mm, 2.5mm~4.4mm for each distance. The result of X RMSE was analyzed to be 0.0043m in a boundary surveying for existing building between prism surveying and reflective sheet surveying, and also Y RMSE was 0.038m. The source of error is estimated that the body of the prism can not be exactly attached to the edge of a building. Therefore, it will be very helpful to use a reflective sheet surveying with a prism in both the limit of collimation and error reductions as a building boundary measurement in cadastral resurvey surveying.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.65-70
• /
• 2008

The shape and the material of a reflective sheet affect the amount and the range of retroreflection on incident angle of light, significantly. In this study, the method to determine the shape and the material of the reflective sheet is introduced for the maximum retroreflection. Since the microprism shape with an equilateral triangle base has been used widely, the shape optimization of the microprism shape is carried out. The path of the light within the prism is geometrically calculated to find the relationship between incoming and outgoing light to and from a microprism. The optimal shape of a microprism found by the simulation has almost same figure with the one being used in industry for the maximum retroreflection. It is also found that the refraction index of the reflective sheet is another parameter to control for maximum retroreflection and the range of retroreflection.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.277-283
• /
• 2011

In this study, engineering grade and high intensity reflective sheets were prepared with glass beads and their reflection performance and physical properties were investigated. The reflective sheets prepared by using glass beads are divided into enclosed or encapsulated lens type, depending on whether the glass beads are open in air or not. Because of an extra layer on the glass bead surface, the enclosed lens type reflective sheets show very little change in the properties by bad weather conditions, compared to encapsulated lens type reflective sheets. Optimization of the amount of glass beads on the surface was carried out, which determines the retroreflective properties. Enclosed and encapsulated lens type reflective sheets with various colors were prepared and their coefficients of retroreflection were determined. The encapsulated type reflective sheet with white color shows a coefficient of retroreflection of $210.4cd/1x{\cdot}m^2$, which is higher than the enclosed type ($74cd/1x{\cdot}m^2$). Effect of washing on the reflective property and adhesive power of the reflective sheets was investigated, and it is found that the number of glass beads decreased with washing and the aluminum layer deposited was damaged extensively in the encapsulated lens type reflective sheets.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.35-41
• /
• 2017

Materials exposed to outside will deteriorate due to various weathering factors such as sunlight, heat, temperature, humidity and so on. Therefore, predicting speed of degradation and life time is a very important issue. This research uses retro-reflective sheets with white and green which are most commonly used colors to conduct the outdoor exposure test and acceleration test of xenon arc in Arizona state in the United States, Chennai in India, Sanary in France and Seosan in Korea to measure the reflective performance of retro-reflection. The accelerated factor was obtained by using regression analysis through reflective values obtained from the acceleration test of xenon arc from Seosan area. Also, by using solar uv program, the accelerated factor of various climate regions were obtained and it was confirmed that the accelerated factor of Senary was 1.04, Arizona 1.82, Chennai 1.92 times higher than that of Seosan.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.293-294
• /
• 2012

백색 OLED 조명 분야에서 색 변환은 큰 이슈가 되고 있다. 하지만 청색 유기물의 발광 특성이 좋지 못하여 아직까지 정착이 되지 못하고 있는 것이 현실이다. 본 연구에서는 발광 효율이 낮은 청색 OLED 대신 청색 LED와 황색 OLED를 사용하여 색 변환을 통한 백색 발광 panel을 제조하고 전기 및 광학적 특성을 평가하였다. 먼저 OLED소자는 진공증착방법을 사용하여 ITO (150 nm)/KHI-001 (5 nm)/LG-101 (10 nm)/KHT-001 (25 nm)/ PGH-02 (25 nm): Ir (mpp) 3 (8%): PRD-003 (0.3%)/TMM-004 (10 nm)/LG-201 (20 nm): LiQ (50%)/Al (150 nm) 구조를 갖는 발광면적 $70{\times}70mm^2$의 황색 OLED panel을 제작하였다. CIE 1931색좌표는(0.49, 0.49)이고, 효율은 $41.61{\ell}m/W$이다. 그리고 LED는 청색 칩을 한 줄로 나열하여 LED bar를 만들었고 여기에 도광판, 리버스 프리즘시트, 확산시트 그리고 반사시트를 더하여 점광원을 면광원화 하였다. CIE 1931색좌표가 (0.15, 0.04)이며 효율은 $3.56{\ell}m/W$이다. 황색 OLED를 청색 LED 면광원 뒤에 붙여서 두 빛이 도광판 위쪽으로 나오게 하였다. 이렇게 hybrid된 빛은 인가 전류를 변화 시킴으로써 색온도 3,200 K의 warm white에서 7,800 K의 cool white까지 변환이 가능하였다. 그리고 순백의 hybrid 빛을 얻을 수 있었는데 이때의 색온도는 4200K이고 CIE 1931색좌표는(0.34, 0.33)이며 연색지수는 89였다.

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.73-80
• /
• 2007

This paper aims to develop the diffused reflection material in order to reduce the solar absorption coefficient, and to compare the thermal properties with the different roof structure system; one is using the diffused reflection material applied the upper side of the rigid sheet waterproof system and the other is using the conventional up-side down waterproof system on the roof. For this purpose two experimental test boxes were made of same iso-panel wall and floor with different roof system. The experiment was carried out under these process; measure the surface temperature exposed solar radiation of the variation of the reflection materials(cement paste, silica, galvanized steel and titanium dioxide(TiO2)), measure and analyze the variation of the temperature distribution of the each roof system and indoor air in order to evaluate the thermal properties according to the different roof system. The result shows clearly that using the titanium dioxide(TiO2) might be more effective to reduce the solar insolation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.471-472
• /
• 2005

본 연구는 TFT-LCD의 배경광원인 Backlight Unit(BLU)의 구조를 광학 시뮬레이션을 통하여 분석함으로써 BLU에서의 광효율을 극대화하는데 초점을 두었다. 일반적으로 LCD Monitor BLU는 형광램프, 반사시트, 램프 리플렉터, 도광판, 광학시트로 구성된다 여기에서는 20.1 인치 6램프로 구성된 Monitor용 Side Type BLU에 대하여 램프 리플렉터의 형상, 램프 리플렉터의 내부 공간 변화와 그에 따른 램프의 위치, 램프사이의 배열에 따른 램프에서 도광판으로의 입사광량을 광학 시뮬레이션을 통하여 분석하였다. 위 시뮬레이션의 결과, 램프리플렉터가 'ㄷ' 형상일 때, 램프리플렉터 내부공간의 약 1:2 되는 지점에 램프가 위치하고 Center Lamp가 도광판에 최대한 가깝게 위치할 때 입사광량이 최대가 되어 BLU에서의 광효율이 향상됨을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.139-139
• /
• 2008

나노 임프린트 리소그래피 방법을 이용하여 매미 날개의 표면구조를 열가소성 고분자 시트 위에 역상으로 전사하였다. 그 후 표면구조가 형성된 시트의 UV-가시광선 투과도와 증류수의 접촉각을 측정함으로써 표면구조 형성을 통해 난반사 효과와 자가 세정 효과를 부여하였음을 확인하였다.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.17-22
• /
• 2015

The applications for retro-reflectors, with their unique reflection characteristics, have been expanding, to include venetian blind slats, displays, traffic safety mark, etc. We propose expandable structures of inclined corner cube retro-reflectors and analyze their corresponding reflection characteristics. Various traffic safety structures with retro-reflectors may be designed more quantitatively using the chart of characteristics we have presented.

• Korean Journal of Optics and Photonics
• /
• v.32 no.3
• /
• pp.114-119
• /
• 2021

A large-area graphene sheet has been successfully grown on a copper-foil substrate by chemical vapor deposition (CVD) for industrial use. To screen out unsatisfactory graphene films as quickly as possible, noninvasive optical characterization in reflection geometry is necessary. Based on the optical conductivity of graphene, developed by the single-electron tight-binding method, we have investigated the optical-reflectance contrast. Depending on the four independent control parameters of layer number, chemical potential, hopping energy, and temperature, the optical-reflectance contrast can change dramatically enough to reveal the quality of the grown graphene sheet.