• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.41-49
• /
• 2013

Recent findings have revealed that black carbon is one of the substantial materials affecting climate change along with greenhouse gases. Usually, black carbon is generated by incomplete combustion of biomass and deposited on snow and ice surface, resulting in increasing adsorption of radiant energy and accelerating ice melting. However, it is still questionable what the emission characteristics of black carbons from biomass combustion is. We investigated the emission characteristics of black carbon generated from a wood stove in this study. We found that the emission of black carbon was highly dependent upon combustion temperature and the amount of combustion air supplied. The emission factors were 1.01 g-BC/kg-Oak for fireplace wood burning under incomplete combustion, 0.37 g-BC/kg-Oak for fireplace wood burning under complete combustion and 0.29 g-BC/kg-Oak for small wood-stove burning.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.311-316
• /
• 2019

Japanese anise (Illicium anisatum L.) leaves and twigs were extracted with 50 % aqueous acetone three times. After filtration, the extracts were fractionated with n-hexane, chloroform, ethyl acetate and $H_2O$, and then freeze dried after condensation. Then antioxidation and antiviral activity were evaluated on each fractions. In the antioxidative activities, the results indicated high activity in the EtOAc soluble fraction of the leaves and the EtOAc and $H_2O$ soluble fractions of the twigs. It showed much higher antioxidative value compare to the controls, BHT and ${\alpha}$-tocopherol. In the antiviral activities, the all fractions were negative effects in HRV 1B and EV 71, but good in Influenza PR8. The activities of the crude extracts of the leaves and twigs showed more than 80% activity at the concentration of $10{\mu}g/mL$ and $50{\mu}g/mL$, respectively, and the activities of the EtOAc and $H_2O$ soluble fractions were close to 80%. Based on the above results, the extracts of Japanese anise may be applied for one of the natural biomass sources that can be used as an antioxidant and an antiviral substance.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.715-721
• /
• 2011

This study was conducted to estimate aboveground biomass and nitrogen storage potential of tree species-eight clones of a poplar and hybrids, one clone of Salix alba L., dawn redwood (Metasequoia glyptostroboides Hu and W.C. Cheng), yellow poplar (Liriodendron tulipifera L.), Okamoto maple (Acer okamotoanum Nakai), and pin oak (Quercus palustris $M{\ddot{u}}nchh.$)- after treating with liquid pig manure. Stems showed the highest percentage of aboveground biomass, and followed by branches and leaves. Nitrogen content in aboveground biomass components was the highest in leaves, and followed by branches and stems. Average aboveground biomass production was higher in the clones and species treated with manure than those of not treated, 30 ton/ha and 16 ton/ha, respectively. In the manure-treated site, clone 'Dorskamp' of Populus deltoides${\times}$Populus nigra showed the highest aboveground biomass (48.3 ton/ha). Average nitrogen storage potential was superior in the clones and species treated with manure than those of not treated, 159 kg/ha and 90 kg/ha, respectively. Clone 'Dorskamp' also showed the greatest nitrogen storage potential (286.5 kg/ha) among tested tree species. Therefore, 'Dorskamp' is the most suitable clone for treating liquid pig manure, but additional studies are needed to determine any damages or tolerance from the treatment.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.101-110
• /
• 2021

Interactions between microalgae and heterotrophic bacteria are common in natural environments. This study investigated the effect of heterotrophic bacteria on the activity of the photosynthetic eukaryotic alga Chlorella sp. MF1907 when cocultured. A total of 31 heterotrophic bacterial isolates belonging to different genera were cocultured with MF1907. Interactions of the alga with Agromyces, Rhodococcus, Sphingomonas, Hyphomicrobium, Rhizobium, and Pseudomonas were positive, while those with Burkholderia, Paraburkholderia, Micrococcus, Arthrobacter, Mycobacterium, Streptomyces, Pedobacter, Mucilaginibacter, Fictibacillus, Tumebacillus, Sphingopyxis, and Erythrobacter were negative (p < 0.05). A turnover experiment demonstrating a switch from heterotrophic to autotrophic activity of MF1907 was performed using 16 isolates exhibiting apparent effects (positive, negative, or neutral). Compared with the results of the coculture experiment, eight isolates exhibited the same outcomes, while the others did not. Consistently, Pseudomonas and Agromyces showed a remarkable positive effect on MF1907 activity, and Burkholderia, Streptomyces, and Erythrobacter had a marked negative effect. Our results suggest that it may be possible to use the isolates for controlling populations of microalgae in natural and engineered environments.

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.469-497
• /
• 2020

More than one-third of the world's population still has no access to clean cooking facilities despite global interest and efforts to expand the accessibility of clean cooking fuels. They use traditional biomass, i.e., crops, animal dung and firewood, as their cooking fuel, and the health and economic damage from it is severe. As many studies have been conducted to understand the choice and transition of cooking fuel in developing countries, characteristics of household head have been addressed as one of the main fuel determinants. However, decision-making in households is not only made by household head and can vary depending on the relative characteristics of household members. Thus, this study analyses the determinants of cooking fuel choice through the samples of Cambodian couples(household head and his/her spouse) considering both characteristics of husbands and wives. As a result, it is confirmed that the effects of characteristics, such as employment, education levels, and frequency of media use, between husbands and wives on cooking fuel choice were different. This study is expected to contribute to the development of more sophisticated policies to increase clean fuel in Cambodia, given that it takes into account the characteristics of spouses who have not previously been dealt with in analyzing the determinants of cooking fuel choice and that it is difficult to find research on Cambodia.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.247-257
• /
• 2021

In this work, Iron Nano-Particles Impregnated BioChar/bead (INPBC/bead) soil amendment was developed to increase biochar's reactivity to As in soil and preventing possible wind loss. Prior to preparation of INPBC/bead, INPBC was produced utilizing lignocellulosic biomass and Fe(III) solution in a hydrothermal method, followed by a calcination process. Then, the bead type amendment, INPBC/bead was produced by cross-linking reaction of alginate with INPBC. FT-IR, XRD, BET, and SEM-EDS analyses were utilized to characterize the as-synthesised materials. The particle size range of INPBC/bead was 1-4 mm, and different oxygen-containing functional groups and Fe3O4 crystalline phase were produced on the surface of INPBC/bead, according to the characterization results. The soil cultivation test was carried out in order to assess the stabilization performance of INPBC/bead utilizing As and Pb-contaminated soil obtained from an abandoned mining location in South Korea. After 4 weeks of culture, TCLP and SPLP extraction tests were performed to assess the stabilization efficacy of the amendment. The TCLP and SPLP findings revealed that raising the application ratio improved stabilizing efficiency. The As stabilization efficiency was determined to be 81.56 % based on SPLP test findings for a 5% in (w/w) INPBC/bead treatment, and the content of Pb in extracts was reduced to the limit of detection. According to the findings of this study, INPBC/bead that can maintain pH of origin soil and minimize wind loss might be a potential amendment for soil polluted with As and heavy metals.

• Particle and aerosol research
• /
• v.17 no.4
• /
• pp.125-132
• /
• 2021

Fresh PM_2.5 smokes emitted from combustion of four biomass materials (pellet, palm fruit fiber (PFF), PKS, and sawdust) in a laboratory-controlled environment were characterized using an attenuated total reflectance-fourier transform infrared (ATR-FTIR) technique. In smoke samples emitted from combustion of pellets, PFF and PKS, which is being used as boiler fuels for greenhouses in rural areas, the organic carbon/elemental carbon (OC/EC) ratios in PM_2.5 were very high (14.0-35.5), whereas in sawdust smoke samples they were significantly low (<4.0) due to the combustion method close to flaming combustion. ATR-FTIR analysis showed that OH(3400-3250 cm^-1), CH₃(2958-2840 cm^-1), CH₂(2910 cm^-1 and 2850 cm^-1), ketone(1726-1697 cm^-1), C=C(1607-1606 cm^-1 and 1515-1514 cm^-1), lignin (1463-1462 cm^-1 and 1430-1428 cm^-1) and -NO₂(1360-1370 cm^-1) peaks were identified in all biomass burning (BB) smoke samples. However, additional peaks appeared depending on the type of biomass. Among the four types of biomass materials, an additional peak of the methylene group CH₃(2872-2870 cm^-1) appeared only in PFF and PKS smoke samples, and a peak of C=O(1685 cm^-1) was also confirmed. And in the case of PKS smoke samples, a peak of aromatic C=C(1593 cm^-1 and 1476 cm^-1) that did not appear in other BB samples was also observed. This indicates that the molecular structure of organic compounds emitted during BB differs depending on the type of biomass materials. The results of this study are expected to provide valuable information to more specifically reveal the effect of BB on PM_2.5 collected in the atmospheric environment.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.71-77
• /
• 2022

To increase biomass utilization, rice husk-based activated carbon (RHAC) followed by nitrogen plasma surface treatment was prepared and the electric double-layer capacitor performance was investigated. Through nitrogen plasma surface treatment, up to 2.17% of nitrogen was introduced to the surface of RHAC, and in particular the sample reacted for 5 min with nitrogen plasma showed dominant formation of pyrrolic/pyridine N functional groups. In addition, mesopores were formed on the RHAC material by the removal of silica, and the surface roughness of the carbon material increased by nitrogen plasma surface treatment, resulting in the formation of many micropores. As a result of cyclic voltammetry measurement, at a scan rate of 5 mV/s, the specific capacitance of the RHAC treated with nitrogen plasma increased up to 200 F/g, showing an 80.2% improvement compared to that of using untreated RHAC (111 F/g). This is attributed to the synergetic effect of the introduction of pyrrolic/pyridine-based nitrogen functional groups and the increase of the micropore volume on the surface of the carbon material. This study has a positive effect on the environment in terms of recycling waste resources and using plasma surface treatment.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.275-284
• /
• 2022

Changes in air temperature, CO₂ concentration and precipitation due to climate change are expected to have a significant impact on soybean productivity. This study was conducted to evaluate the climate change impact on growth and development of determinate soybean cultivar in the southern parts of Korea. The high temperature during vegetative period, which does not accompany the increase of CO₂ concentration, increased the canopy photosynthetic rate in soybean, but after flowering, the high temperature above the optimal ranges interrupts the photosynthetic metabolism. In yield and yield components, high temperature reduced both the pod and seed number and single seed weight, resulting in a reduction of total seed yield. On the other hand, the increase in CO₂ concentration dramatically increased the canopy photosynthetic rate over the whole growth period. In addition, high CO₂ concentration increased the number of pods and seeds, which had a positive effect on total seed yield. Under concurrent elevation of air temperature and CO₂ concentration, canopy photosynthesis increased significantly, but enhanced canopy photosynthesis did not lead to an increase in soybean seed yield. The increase in biomass and branch by enhanced canopy photosynthesis seems to be attributed to an increase in the total number of pods and seeds per plant, which compensates for the negative effects of high temperature on pod development. However, Single seed weight tended to decrease rapidly by high temperature, regardless of CO₂ concentration level. Elevated CO₂ concentration did not compensate for the poor distribution of assimilations from source to sink caused by high temperature. These results show that the damage of future soybean yield and quality is closely related to high temperature stress during seed filling period.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.28-37
• /
• 2022

The lignite and bituminous coal are mainly used in thermal power plant. They exhaust green house gas (GHG) such as CO₂, and become deplete, thus require alternative energy resources. To solve the problem, the hydrochar production from biomass is suggested. In this study, both hydrothermal carbonization (HTC) and solvothermal carbonization (STC) were used to produce high quality hydrochar. To improve the reactivity of water solvent process in HTC, STC process was conducted using ethanol solution. The experiments were carried out by varying the solid-liquid ratio (1:4, 1:8, 1:12), reaction temperature (150~300 ℃) and retention time (15~120 min) using kenaf. The characteristic of hydrochar was analyzed by EA, FT-IR, TGA and SEM. The carbon content of hydrochar increased up to 48.11%, while the volatile matter decreased up to 39.34%. Additionally, the fuel characteristic of hydrochar was enhanced by reaction temperature. The results showed that the kenaf converted to a fuel by HTC and STC process, which can be used as an alternative energy source of coal.