• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.2
• /
• pp.191-200
• /
• 2005

To develop composite bridge deck, comparative study on the flexural characteristics of deck fabricated with filament winding and pultrusion was performed. In this study, composite deck of triangular shape was fabricated with filament winding process and flexural tests were conducted along with pultruded 'Duraspan' deck. Failure load, maximum deflection and strains were compared with each other. Also finite element analysis for filament winding deck was carried out and the results were compared with those from experiments.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.431-444
• /
• 2012

Constituents of timber framed floor affect the insulation performance against impact sound significantly. Among them, installation of massive sound absorbing layer and reinforcement of stiffness of timber floor have been considered as major factors that improve the insulation performance against impact sound. Researches on evaluating the effect of floor constitutions have been carried out through the field measurements for timber framed buildings in Korea. It is concluded that the impact sound pressure level at the relatively lower frequency governs the overall insulation performance, and can be improved by the installation of sound absorbing layer and reinforcement of floor stiffness. Especially, the insulation performance against heavy impact sound was improved significantly when the massive cement mortar layer for floor heating system was installed and the stiffness was reinforced by shortening the joist span using additional beam at the mid-position of original span.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.513-517
• /
• 2004

This study aims to evaluate factors of floor structure influencing to the floor impact sound. For this reasons, we measured the vibration of floor and the floor impact sound in moment flame structure. The main results from this study are that slab area and thickness are critical factors of the floor impact sound and aspect ratio slab is not verified in flor impact sound.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.594-602
• /
• 2023

To date, research on heavy floor impact noise has mainly been conducted. The reason is that in the case of lightweight floor impact noise, sufficient performance could be secured with only the floating floor structure and floor finishing materials. In the case of heavy floor impact noise in a floating floor structure, the reduction performance can be predicted to some extent by measuring the dynamic elasticity of the floor cushioning material. However, with the recent introduction of the post-measurement system, various floor structures are being developed. In particular, many non-floating floor structures that do not use cushioning materials are being developed. In floor structures where cushioning materials are not used, the finishing material will have a significant impact on lightweight floor impact noise. However, research on floor finishing materials is currently lacking. In this study, as a basic research on the development of various floor finishing materials for effective reduction of lightweight floor impact noise, various materials used as floor finishing materials for apartment complexes were selected, the sound insulation performance of lightweight floor impact noise was measured in an actual laboratory, and vibration characteristics were identified through simple experiments. The purpose was to confirm the predictability of light floor impact noise.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.12-17
• /
• 2011

This paper presents the flexural behavior of a hybrid Glass Fiber-Reinforced Polymer(GFRP)-steel decks for use in deteriorated bridge decks replacement. Static load tests were conducted to investigate the structural characteristics of the hybrid FRP-steel deck. The tested deck panel satisfied the design criteria. The failure mode of the hybrid deck was demonstrated ductility with deformation beyond initial yielding. The responses were compared with the ANSYS finite element predictions. It was found that the presented hybrid deck was efficient for use in bridges. The thickness of the hybrid deck may be decreased when compared to that of the all FRP deck with similar flexural rigidity.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.287-294
• /
• 1998

입면의 형태가 임의의 층에서 큰 차이를 보이는 3차원 비정형 setback 구조물의 동적 거동 특성과 이들 구조물의 동적 거동에 미치는 바닥 슬래브의 면내 변형 효과를 분석하였다. 비정형 setback 구조물의 전반적인 동적 거동특성을 분석하기 위하여 베이스 부분의 평면적과 타워 부분의 평면적 비(R?), setback 발생위치(L?)등을 매개 변수로 사용하였다. 48개의 비정형 setback 구조물들에 대한 해석 수행 결과 setback 구조물은 정형 구조물에 비해 횡방향 1차 모드의 유효 모드 중량(effective modal weight)이 작게 나타나는 경향을 보이기 때문에 setback 구조물의 동적 거동을 파악하기 위해서는 등가 정적 해석법 대신에 동적 해석을 수행할 필요가 있음을 알 수 있었다. 바닥슬래브의 면내 변형은 보다 긴 구조물의 고유 진동 주기값을 가져오며 모드 순서 및 모드 형상에도 변화를 준다. 이러한 사실은 바닥슬래브의 면내 변형으로 인하여 횡방향 저항 요소들간의 전단력 분포와 층 변위가 영향을 받을 수 있다는 것을 의미한다. 이러한 현상은 횡방향 저항 요소들간의 강성 차가 심한 프레임-전단벽 시스템에서 두드러지게 나타난다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.43-50
• /
• 2005

Composite slab structures consisted with steel deck plate and concrete material show generally anisotropic structural behavior because of different stillness between the major direction and sub-direction of deck plate, and also the structures can be regarded as the laminated slab structures. It is necessary for the composite deck slab structures to carry out the exact vibration analysis to evaluate the serviceability. Also, it is needed to evaluate the exact structural behavior of composite deck slab with a layered orthotropic materials. In this paper, the thickness of lopping concrete and deck plate are used to calculate the material coefficient stiffness of a sub-direction, and an equivalent depth calculated from sectional stiffness of concrete and deck plate is applied to get the silliness of a major direction. The stiffness of two layered composite plates with different depth is determined by laminated theory. It is concluded that the presented method car efficiently analyze the structural behavior of composite deck slab consisted with steel deck plate and concrete material in the practical engineering field.

• Computational Structural Engineering
• /
• v.15 no.4
• /
• pp.45-52
• /
• 2002

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.203-211
• /
• 2001

고층구조물의 해석에 사용되는 ETABS와 같은 상용프로그램은 해석의 단순화를 위하여 강막가정을 사용하게 된다. 이와 같은 강막가정은 일반적으로 바닥판의 휨 강성과 보의 편심효과를 무시하게 된다. 이러한 가정은 골조구조물의 정적해석에 대해서는 정당한 결과를 얻을 수 있으나 동적해석의 경우에는 바닥판의 휨 강성과 보의 편심효과가 구조물의 횡 방향 거동에 주요한 영향을 미치게 된다. 그러나 바닥판의 영향과 보의 편심효과를 고려하기 위해서는 유한요소의 특성상 바닥판과 보를 여러 개의 요소로 나누어야 하며, 이로 인하여 해석과 구조물의 모형화에 많은 시간이 소요되는 단점이 발생하게 된다. 본 논문에서는 이러한 단점을 보완하기 위하여 부분구조기법과 대형요소를 사용한 효율적인 모형화 방법에 대하여 연구하였다. 또한 최종적으로 각 층에 대하여 강막가정을 적용하여 층 당 3개의 자유도만을 고려하는 막대모델을 제안하였다. 본 논문에서는 제안한 모형화기법의 정당성을 검토하기 위하여 구조물의 응답을 비교하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.149-154
• /
• 1990

본 연구에서는 차음성능 기준과 평가방법 설정을 위한 기초작업으로 국내 공동주택 바닥구조에 대한 차음성능 실태조사를 실시 차음성능수준을 파악 하고, 주민반응, 주요 내부소음원, 측정방법상의 문제점 등을 고려하여 우리 의 실정에 적합한 평가방법의 설정방향을 모색코자 한다. 본 연구의 결과는 우리나라 공동주택의 독특한 바닥구조인 온돌에 적합한 차음등급의 제정에 필수적인 자료로 활용될 수 있으며, 더 나아가서는 건축물이 차음성능 보장 을 위한 설계 지침으로도 활용될 수 있을 것이다.