• Clean Technology
• /
• v.18 no.3
• /
• pp.295-300
• /
• 2012

Synthesis of well-defined particle with tunable size, shape, and functionalities is strongly emphasized for various applications such as chemistry, biology, material science, chemical engineering, medicine, and biotechnology. This study presents micromolding method for the fabrication of anisotropic particles with elegant control of curvature of covex roof. For the demostration of rapid fabrication of the particles, we have applied polydimethylsiloxane (PDMS) micromold as structure guiding template and wetting fluid to control curvature of roof of the particles. Based on this approach, we can control the radius of curvature from $20{\mu}m$ to $70{\mu}m$ with different aspect ratio of mold. In addition, wetting fluids with different wetting properties can also modulate the height and radius of curvature of the particles. We envision that this methodology is promising tool for precise control of particle shape in 3-dimensional space and new synthetic route for anisotropic particles with cost effective, simple, easy, and fast procedure.

• The Journal of Information Technology
• /
• v.4 no.2
• /
• pp.117-127
• /
• 2001

A self-structured neural network algorithm that finds optimal fuzzy membership functions and nile base to fuzzy model is proposed and a fuzzy-neural network controller is designed to get more accurate position and velocity control of wheeled mobile robot. This procedure that is composed of three steps has its own unique process at each step. The elements of output term set are increased at first step and then the rule base Is varied according to increase of the elements. The adjusted controller is in competition with controller which doesn't include any increased elements. The adjusted controller will be removed if the control-law lost. Otherwise, the controller is replaced with the adjusted system. After finished regulation of output term set and rule base, searching for input membership functions is processed with constraints and fine tuning of output membership functions is done.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.174-176
• /
• 2019

최근 미세먼지(PM10 또는 PM2.5)로 인한 인체 유해성 및 실제 피해사례가 인터넷, TV 매체 등에 의해 화두가 됨에 따라 각종 제조, 사업장 및 발전소에서는 미세먼지 배출기준을 충족하기 위한 고효율 집진 기술이 필요로 되고 있는 상황이다. 고압 코로나 방전에 의해 미세먼지를 포집하는 고전압 하전방식 집진장치의 경우 전류를 광범위로 조절 가능하며 역전리 방지에 탁월하여 고효율의 집진이 가능하다. 본 논문에서는 기존의 다전원(펄스전원, 기본전원)을 이용한 마이크로 펄스 하전방식이 아닌 공진형 컨버터와 고압 트랜스포머, 배전압 회로를 적용한 고전압 단전원 제어 하전방식 및 이를 이용한 고전압 전압원의 저속 스위칭 제어기법을 제안하고, 실제 측정을 통해 제안 방식의 실효성을 검증하였다.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.733-737
• /
• 2012

This study reports the microfluidic preparation of monodisperse multiple emulsions using hydrodynamic control. To generate multiple emulsions, we fabricate a microfluidic capillary device based on co-flowing stream without any surface modification of microchannels. Based on the system, we can successfully generate multiple emulsions (W/O/W) using water containing 0.5 wt% Tween 20, n-hexadecane with 5 wt% Span 80, and 10 wt% poly (vinyl alcohol) (PVA) aqueous solution, respectively. Furthermore, we control the number of inner droplets by modulation of flow rate of inner fluid at fixed flow rate of middle and outer fluid. The multiple emulsions having precisely controlled inner droplets' size and number can be applicable for multiple chemical reactions as an isolated microreactor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.138-145
• /
• 2000

A identification algorithm that finds optimal fuzzy membership functions and rule base to fuzzy model isproposed and a fuzzy controller is designed to get more accurate position and velocity control of wheeled mobile robot. This procedure that is composed of three steps has its own unique process at each step. The elements of output term set are increased at first step and then the rule base is varied according to increase of the elements. The adjusted system is in competition with system which doesn't include any increased elements. The adjusted system will be removed if the system lost. Otherwise, the control system is replaced with the adjusted system. After finished regulation of output term set and rule base, searching for input membership functions is processed with constraints and fine tuning of output membership functions is done.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.51-55
• /
• 2021

The nurses manually carry out the intravenous therapy for the patients. Using an Arduino, the fine flow controlling device was invented to provide an ongoing patient care. The medication is injected through a peristaltic pump, and the amount of the solution is controlled with a RGB color sensor. The power of the device is supplied through the batteries. An amount of the injection is measured with LIG strain sensor fabricated by 355nm UV pulsed laser. This system will provide a better medical service.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.142-147
• /
• 1998

핵연료피복관의 부식성능은 합금원소의 조성에 매우 민감하지만 열처리변수에 따라서도 크게 좌우되므로 열처리변수가 Zr 신합금의 부식저항성과 미세조직에 미치는 영향을 조사하였다. Zr-Nb-Sn-Fe-Cr 조성을 갖는 합금을 제조하여 열처리면수($\Sigma$A)를 7.7x$10^{-l9}$~5.3x$10^{-17}$ hr로 제어한 후 400 $^{\circ}C$/10.3 MPa 분위기의 autoclave를 이용하여 부식시험을 실시 하였다. 열처리변수($\Sigma$A)가 증가함에 따라서 부식저항성은 감소하였으며 열처리변수의 값이 7.7x$10^{-l9}$와 8.8x$10^{-l9}$ hr일 때 부식저항성은 매우 우수하였다. 천이후 부식속도에 미치는 열처리변수의 영향은 무게증가량에 미치는 영향과 동일한 경향을 나타냈으며 $\Sigma$A가 1.0x$10^{-18}$ hr이하에서 매우 낮은 부식속도를 보였다. 석출물 크기의 증가는 부식저항성을 감소시키는 것으로 관찰되었다. 따라서 우수한 부식저항성을 갖는 Zr 신합금을 개발하기 위해서는 중간 열처리 온도를 적절히 조절하여 석출물의 크기를 0.05 $\mu$m이하로 제어하여야 한다.다.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2023

Microfluidic reactors have been made to achieve significant development for the generation of new functional materials to apply in a variety of fields. Over the last decade, microfluidic reactors have attracted attention as a user-friendly approach that is enabled to control physicochemical parameters such as size, shape, composition, and surface property. Here, we develop a centrifugal microfluidic reactor that can control the flow of fluid based on centrifugal force and generate multifunctional particles of various sizes and compositions. A centrifugal microfluidic reactor is fabricated by combining microneedles, micro- centrifuge tubes, and conical tubes, which are easily obtained in the laboratory. Depending on the experimental control param- eters, including centrifuge rotation speed, alginate concentration, calcium ion concentration, and distance from the needle to the calcium aqueous solution, this strategy not only enables the generation of size-controlled microparticles in a simple and reproducible manner but also achieves scalable production without the use of complicated skills or advanced equipment. Therefore, we believe that this simple strategy could serve as an on-demand platform for a wide range of industrial and academic applications, particularly for the development of advanced smart materials with new functionalities in biomedical engineering.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.406-409
• /
• 2002

본 논문에서는 문자인식이 가능하도록 줌, 포커스를 제어하여 한글 문서 영상을 확대/축소하는 시스템을 구현하였다. 한글 문서 영상에서 확대/축소 할 영역이 지정되면 그 영역의 가로, 세로 거리를 펄스 수로 변환한 후 Step모터를 제어하여 그 위치만큼 카메라를 이동시킨다. 문서 영상이 입력되면 문자인식이 가능한 크기만큼 줌을 제어하고, 피드백 되어진 영상으로부터 조정된 줌에 맞는 포커스로 근접 제어한 후, 더욱 선명한 영상을 얻기 위해 명암 차이에 의한 미세 조정을 하였다. 이 경우, 줌 및 포커스는 퍼지 추론으로 .제어하는 DC모터로 조정하였다.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.740-747
• /
• 1999

Grain refinement is the only strengthening mechanism that improves both strength and toughness. Controlled rolling and accelerated cooling techniques have been known to be effective method to improve the mechanical properties by controlling the recrystallization and/or grain coarsening during processing. Repeat phase transformation $(\gamma/\alpha)$ by repeat heat treating is another way of grain refinement. In this study, a combined effect of controlled rolling and repeat heat treating was investigated. To study the effects of Mo addition and process parameters, Mo alloyed low carbon steels were prepared and thermomechanical controlled processes were simulated in the Gleeble system. The Mo addition resulted in an increasement of the grain coarsening temperature and suppress austenite recrystallization. The optimum condition for the refinement of austenite was obtained when the controlled rolling was performed twice with the same heat treatment condition, and reduction ratio of second pass was higher than that of first pass.