• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.137-145
• /
• 2016

A novel tracking method is proposed to find coronary artery using high-order curve model in coronary CTA(Computed Tomography Angiography). The proposed method quickly generates numerous artificial trajectories represented by high-order curves, and each trajectory has its own cost. The only high-ranked trajectories, located in the target structure, are selected depending on their costs, and then an optimal curve as the centerline will be found. After tracking, each optimal curve segment is connected, where optimal curve segments share the same point, to a single curve and it is a piecewise smooth curve. We demonstrated the high-order curve is a proper model for classification of coronary artery. The experimental results on public data set sho that the proposed method is comparable at both accuracy and running time to the state-of-the-art methods.

• Journal of the HCI Society of Korea
• /
• v.2 no.1
• /
• pp.49-56
• /
• 2007

A nonintrusive projection-based AR approach using complementary pattern has been recently proposed and applied to virtual studio. However, the approach faces the tradeoff between the pattern imperceptibility and compensation accuracy. To alleviate the tradeoff, we propose a content adaptive pattern concealment approach. The projector input images (AR images) are divided into rectangular regions and spatial variation and color distribution are computed in the regions. Based on the spatial variation and color distribution, we embed locally different strength of pattern images into different color channels. It is demonstrated that the proposed approach has two opposite advantages by comparing it with the previous (non-adaptive) approach through a variety of experiments and subjective evaluation. Our content adaptive approach can obtain the same performance using weaker pattern than the previous approach and thus significantly improve the imperceptibility of the pattern. On the contrary, our content adaptive approach can make strong pattern less perceptible and thus produce better compensation results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.63-63
• /
• 2012

편광분석법(ellipsometry)은 대상 물질의 유전율 함수의 실수부와 허수부를 Kramers-Kronig 관계식의 도움 없이 그 물질상수를 정확히 측정할 수 있는 매우 우수한 기술이다. 이 기술의 큰 장점 중 하나는 빛의 편광상태의 변화를 이용한 비파괴적인 방법으로써 실시간 측정이 가능하며, 박막의 두께측정의 오차범위는 0.1 nm 이하로써 매우 정확하다는 것이다. 본 연구자는 이러한 우수한 측정 기술인 편광분석법을 고진공의 분자살박막증착장치(MBE) 와 결합하여 AlSb, AlP의 유전율 함수를 측정하였다. Al 계열을 포함하는 반도체 화합물은 Al의 산소친화력이 강해 대기 중에서 순수한 유전율 함수를 얻기가 불가능하다. 하지만 본 연구실에서 초고진공 상태의 MBE 챔버에서 시료를 성장시키는 동시에 실시간으로 편광분석기를 이용하여 측정하였고, 지금까지 발표된 결과들 중 가장 순수한 상태의 AlSb 유전율 함수를 얻어낼 수 있었다. 또한 순수한 AlP의 유전함수를 측정할 수 있었고, 이는 편광분석기를 이용한 최초의 실험결과로써 이차미분을 이용한 전이점 분석결과 이론적인 전자밴드구조에서 E1, E1+${\Delta}1$, E2에 해당하는 밴드갭들을 확인할 수 있었다. 또한 표면의 원자배열 구조와 실시간으로 일어나는 그들의 역학적인 현상들에 관한 정보를 얻을 수 있는 surface photoabsorption (SPA)를 metalorganic chemical vapor deposition (MOCVD)에 장착하여 실시간 모니터링이 가능하도록 하였다. SPA를 이용하여 GaAs/AlGaAs 양자우물구조의 성장을 원자층 수준으로 실시간 모니터링을 할 수 있었다. 그리고 SPA를 이용하여 MOCVD 안에서 InP에 As가 흡착 및 탈착되는 현상을 분석하여, As의 흡착이 두 단계에 의해 이루어짐을 분석하였다. 그리고 편광분석법의 빠르고 정확한 측정 기술을 규칙적인 구조체에서 전자기파의 회절을 구할 수 있는 Rigorous Coupled-Wave Analysis (RCWA) 계산방법과 결합하여 나노구조의 기하학적인 모양을 정확하고 빠르게 구할 수 있었다. 본 연구를 위해 규칙적인 3차원 Si 구조체 제작하여 편광분석기로 측정하고 $SiO_2$와 표면 거칠기를 고려하여 RCWA로 분석한 결과, 규칙적인 Si 구조와 산화막 층까지 정확하게 분석할 수 있음을 확인하였다. 또한 규칙적인 나노구조분석 연구를 넘어 불규칙적인 나노구조에 대한 분석 가능성을 보이기 위해 InAs 양자점을 증착하여 분석하였고, 이를 통해 편광분석법과 RCWA를 이용하여 불규칙적인 나노구조의 모양과 크기, 분포의 분석이 가능함을 보였다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.3
• /
• pp.24-34
• /
• 2010

This paper analyzed the partial differential equations of laminated composite shells of revolution by using the finite difference method. The proof that numerical results are reasonable and accurate is obtained through converge ratio analysis and commercial program LUSAS for the structural analysis. The purpose of this study is to examine closely the engineering advantages and to analyze the structural behaviors of the anisotropic shells of revolution. Thus, the relevant reinforcement and most suitable arrangement of fiber to produce the highest strength are proposed through the numerical results according to a variety of parameter study. Namely, the distribution of displacements and stress resultants are analyzed according to the change of meridian's curvature, the ratio of height-width of shell, subtended angle, fiber angle, and so on. Using these distribution, the most suitable shell may be proposed to produce the highest strength. Also, the configuration of the entire laminated composite conical shells is analysed, and a variety of the design criterion of circular conical shell are proposed and studied in engineering view points.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.4
• /
• pp.342-348
• /
• 2014

In general, the forming process of the curved hull plates consists of sub tasks, such as roll bending, line heating, and triangle heating. In order to complement the automated curved hull forming system, it is necessary to develop an algorithm to classify the curved hull plates of a ship into standard shapes with respect to the techniques of forming task, such as the roll bending, the line heating, and the triangle heating. In the previous research, the classification algorithm of curved hull plates was studied only about rectangle shaped plates, and other limitations were notified. In this paper, the classification algorithm is extended to classify not only rectangle shaped plates but also arbitrary polygon hull plates. The discrete curvature can be computed by using arbitrary polygon mesh which is represented by half-edge data structure and discrete differential geometry. The algorithm tests to verify the developed algorithm with sample plates of a real ship data have been performed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.3
• /
• pp.37-46
• /
• 1991

A method is developed for solving the natural frequencies and mode shapes of linearly variable tapered beams. The governing differential equation for the tapered beam is derived. Three kinds of cross sectional shape are considered in differential equation. The Runge-Kutta method and the determinant search method are used to perform the integration of the differential equation and to determine the natural frequencies, respectively. The hinged-hinged, hinged-clamped, damped-clamped and free-damped end constraints are investigated in numerical examples. The lowest four nondimensional natural frequencies are obtained as functions of $d_b/d_a$. ratio. The effects of end constraints and cross sectional shapes on frequencies are analyzed and typical mode shapes are also presented.

• Journal of Digital Contents Society
• /
• v.16 no.6
• /
• pp.909-916
• /
• 2015

This paper presents a method to display the 3D vector fields by analyzing phase space. This method is based on the connections between ordinary differential equations and the topology of vector fields. The phase space analysis should be geometric interpolation of an autonomous system of equation in the form of the phase space. Every solution of it system of equations corresponds not to a curve in a space, but the motion of a point along the curve. This analysis is the basis of this paper. This new method is required to decompose the hexahedral cell into five or six tetrahedral cells for 3D vector fields. The critical points can be easily found by solving a simple linear system for each tetrahedron. The tangent curves can be integrated by finding the intersection points of an integral curve traced out by the general solution of each tetrahedron and plane containing a face of the tetrahedron.

• Korean Journal of Remote Sensing
• /
• v.21 no.2
• /
• pp.135-143
• /
• 2005

RPC(Rational Polynomial Camera) models have become the replacement model of choice for a number of high resolution satellite imagery providers. RPCs(Rational Polynomial Coefficients) provide a compact accurate representation of the ground to image geometry, allowing users to perform full photogrammetric processing of satellite imagery including block adjustment, 3D feature extraction and orthorectification. This paper presents an algorithm for 3D feature extraction using downhill simpler method which requires only function evaluations, not derivatives. The algorithm was implemented as an executable software program and tested using stereo IKONOS images of Seoul city. The results showed that the proposed algorithm was fast and accurate enough to be used as a practical method for the 3D feature extraction from stereo images with RPCs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.975-981
• /
• 2013

A robust optimization is only one of the ways to minimize the effects of variances in design variables on the objective functions at the preliminary design stage. To predict the variances and to formulate the probabilistic constraints are the most important procedures for the robust optimization formulation. Though several methods such as the process capability index and the six sigma technique were proposed for the prediction and formulation of the variances and probabilistic constraints, respectively, there are few attempts using a percent defective which has been widely applied in the quality control of the manufacturing process for probabilistic constraints. In this study, the robust optimization for a lower control arm of automobile vehicle was carried out, in which the design space showing the mean and variance sensitivity of weight and stress was explored before robust optimization for a lower control arm. The 2nd order Taylor expansion for calculating the standard deviation was used to improve the numerical accuracy for predicting the variances. Simplex algorithm which does not use the gradient information in optimization was used to convert constrained optimization into unconstrained one in robust optimization.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.31-38
• /
• 2003

Among mitigation techniques for electric and magnetic field (EMF) from an overhead transmission line a passive loop is a way that can be cheap and easily installed on the existing towers and have a satisfactory effect as well. However current induced in the passive loop causes transmission power loss and the phase imbalance increases since geometrical asymmetry of the transmission lines becomes larger. So in order to evaluate the power loss and the phase imbalance due to a passive loop, this paper represent a 345[kV] 1-circuit flat type transmission line as asymmetrical 3-phase distributed parameter line model where the effect of a passive loop is embedded in the line parameters, and then formulates differential equations. By solving these equations voltages and currents of each phase at receiving end become known. We find out that power losses occur differently at each phase and positive sequence component decreases at receiving end while negative sequence component increase. In general phase imbalance due to a passive loop is slight, but it increases in proportional to the induced current and length of section where the passive loop is installed. Thus the phase imbalance should be included in terms of cost for introducing a passive loop.