• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.8-15
• /
• 2024

In this study, nitrogen plasma treatment was performed in 5, 10, and 15 minutes to improve the tetracycline adsorption performance of activated carbon. All nitrogen plasma-treated activated carbons showed improved tetracycline adsorption compared to untreated activated carbons. The nitrogen functional groups in activated carbon lead to chemisorption with tetracycline via π-π interactions and hydrogen bonding. In particular, in the nitrogen plasma treatment at 80 W and 50 kHz, the activated carbon treated for 10 minutes had the best adsorption performance. At this time, the nitrogen content on the surface of the activated carbon was 2.03% and the specific surface area increased to 1,483 m²/g. As a result, nitrogen plasma treatment of activated carbon improved its physical and chemical adsorption capabilities. In addition, since the adsorption experimental results were in good agreement with the Langmuir isotherm and pseudo-second order model, it was determined that the adsorption of tetracycline on the nitrogen plasma-treated activated carbon was dominated by chemical adsorption through a monolayer. As a result, nitrogen plasma-treated activated carbon can be used as an adsorbent to efficiently remove tetracycline from water due to the synergistic effect of physical adsorption and proactive chemical adsorption.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.362-365
• /
• 2002

토양의 물리/화학적 특성에 따른 토양의 유기오염물 흡착능 변화를 규명하기 위하여, 토양 내 clay 함량 및 유기물 함량변화, 수용액 내 TCE 농도변화에 따른 TCE 의 토양내 흡착량 변화를 측정하였다. 수용액의 pH와 실내온도는 일정하게 유지시켰으며 clay는 표면적이 다른 Ca-montmorillonite, Na-montmorillonite, kaolin을 이용하였고, 유기물질로는 활성탄을 사용하였다. 일정한 토양성분과 실제토양에 대해 수용액 내 TCE의 농도를 변화시켜 농도변화에 따른 흡착량 변화를 측정하였다. 실험결과 유기물과 점토함량의 증가에 따라 흡착량은 모두 증가하였으나 활성탄에 의한 TCE 흡착량이 점토에 비해 매우 높았으므로 유기물에 의한 TCE 흡착영향이 점토에 의한 흡착 영향보다 큰 것으로 나타났다. TCE 농도변화에 따른 흡착결과는 실제토양과 모사토양에서 모두 농도가 증가함에 따라 흡착 증가율이 증가하다가 감소하는 Langmuir isotherm 형태를 보여 주었다.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.7-16
• /
• 1990

The sorption of radioactive cobalt and ruthenium on alumina, silica gel, zeolite 3A, kaolin and Na-bentonite has been studied as a function of pH. nuclide concentration and ionic strength. Retardation factor for cobalt and ruthenium on soil minerals was determined through porosity measurement. Hydrolysed species, cobalt and ruthenium interact with solid surfaces by physical adsorption processes. Freundlich sorption isotherms for cobalt and ruthenium are effectively linear. The sorption decreases with increasing ionic strength for cobalt and ruthenium. The effect of increasing porosity on the retardation factor countered the effect of a significant increase in the distribution coefficient.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.421-422
• /
• 2003

면섬유를 가공할 때 가공효과는 면섬유 미세기공에의 가공제 흡착량에 의존한다. 흡착량에 영향을 주는 것은 화학적으로는 가공제와 면섬유 간의 친화력이고, 물리적으로는 가공제의 물 속에서의 크기 즉, hydrodynamic volume이다. 기존 면섬유 가공제의 경우 낮은 분자량을 사용하였으나, 최근 들어 높은 분자량의 가공제를 사용 하는 경향이 있다. 고분자량 가공제의 경우에는 앞서 언급한 것과 같이 가공제의 크기가 가공제의 가공효과에 영향을 미칠 수 있으나, 이에 관련된 연구는 많지 않다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.320-324
• /
• 1998

양모의 주성분인 케라틴 단백질은 과거에는 주로 의복용 재료로서 이용되어 왔지만 최근에는 케라틴이 가지는 물리적, 화학적 특성 때문에 양모-케라틴 유도체를 기능성고분자 소재로 이용하려는 관심이 높아지고 있다. 양모케라틴 단백질은 원래 섬유 자체가 중금속 흡착성을 보유하고 있어 여러 용해 유도체의 흡착특성이 연구되고 있으며 우수한 생체적합성이 있어 헤파린과의 불용성 전해질 복합체를 필름으로 제조하여 인공혈관으로의 응용와 같은 의료분야에의 연구도 진행되고 있다. (1-3) (중략)

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.3-10
• /
• 2016

Effects of acid ($HNO_3$ and HCl) modification on the adsorption properties of Pb(II) and Cu(II) onto bamboo-based activated carbon (BAC) were investigated through a series of batch experiments. The carbon content increased and oxygen content decreased with acid treatment. $HNO_3$ induced carboxylic acids and hydroxyl functional groups while HCl added no functional group onto BAC. The pseudo-second order model better described the kinetics of Pb(II) and Cu(II) adsorption onto experimented adsorbents, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption involving valency forces through sharing or exchange of electrons between the adsorbate and the adsorbent. The equilibrium sorption data followed both Langmuir and Freundlich isotherm models. The adsorption capacities of BAC were affected by the surface functional groups added by acid modification. The adsorption capacities were enhanced up to 36.0% and 27.3% for Pb(II) and Cu(II), respectively by the $HNO_3$ modification, however, negligibly affected by HCl.

• Clean Technology
• /
• v.24 no.4
• /
• pp.348-356
• /
• 2018

The adsorption equilibria of oxygen, nitrogen and argon on carbonaceous adsorbent with slit-shaped and randomly etched graphite (REG) pores were calculated by molecular simulation method. Reliable models of adsorbents and adsorbates for adsorption equilibria are important for the correct design of industrial adsorptive separation processes. At the smallest physical pore of $5.6{\AA}$, only oxygen molecules were accommodated at the center of the slit-shaped pore, and from $5.9{\AA}$ nitrogen and argon molecules could be accommodated in the pores. Slit pores showed higher adsorption capacity compared with REG pores with same averaged reenterance pore size due to dead volume and inaccessible volume in defected pores. And it was shown the adsorption capacities of oxygen and argon was same in larger pore size. From calculated adsorption isotherms at 298 K it showed that the adsorption capacity ratio of oxygen to nitrogen is increased as pressure is increased.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.261-264
• /
• 2000

악취가스제거용으로 흔히 파쇄상 활성탄소를 사용하고 있는데 조립상 침착 활성탄소를 사용하면 경도가 높고 입도가 균일하여 흡착탑 내에서 일정한 가스 유속분포를 얻을 수 있고 Life Time을 연장할 수 있기 때문에 여러 장점이 있다. 일반 활성탄소의 표면은 비극성이며 흡착력이 본질적으로 단순히 반델발스 힘에 의한 물리흡착이기 때문에 황화수소나 $NH_3$ 등 비점이 낮은 성분에 대해서는 충분한 흡착성을 갖지 못한다. (중략)

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.152-158
• /
• 2015

This paper investigated the membrane fouling potential at the state of passive adsorption which is no permeation with the test modules on COD (Chemical oxygen demand) loading rates, examined the recovery rate and resistance on membrane fouling by three cleaning manners of hydrophobic membrane in a bioreactor. The results showed that high COD loading led to the increase of extra-cellular polymeric substances and filtration resistance. The permeability resistance from 1st day to 63rd day was getting increased, however, the value of permeability resistance after 63th day during the operation period was almost same level at three COD loading rates, it was due that the biomass adhesion on membrane surface at the state of passive adsorption reached to the critical state. Also, the final recovery rates after three cleaning manners were 78%, 72% and 69% at the COD loading concentrations of 250 mg/L, 500 mg/L and 750 mg/L respectively, and then recovery rate by physical cleaning at Run 2 and Run 3 was decreased after 40th day, it proved that biomass cake, which is not easily removed, was formed on the membrane surface because of high COD loading rate and EPS concentration.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.396-400
• /
• 2010

In this work, the adsorption behaviors of activated carbons (ACs) containing chelating functional groups were studied in $CO_2$ removal. The ACs were modified by pyrolysis of peroxide and glycidyl methacrylate graft polymerization in order to induce chelating functional groups, such as diethylenetriamine groups on the AC surfaces. The surface functional groups of the ACs were characterized by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). The textural properties of the ACs were analyzed by $N_2$/77 K isotherms. Adsorption behaviors of the ACs were observed in the amounts of $CO_2$ adsorption. From the results, we found that the chelating functional groups on the AC surfaces led to enhance selectivity and chemisorption on $CO_2$ adsorption in spite of decreasing the physical adsorption properties.