• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1366-1381
• /
• 1997

Background : Uvulopalatopharyngoplasty(UPPP) has become the most common surgical treatment for obstructive sleep apnea syndrome(OSAS). However, the results of this therapeutic modality have been quite variable with successful results by several authors and poor results by others. Until recently, in Korea, there is only a few reports about the clinical efficacy of UPPP. A prospective study was undertaken to evaluate the effectiveness and complications of UPPP. Method : Twenty-six OSAS patients who had undergone UPPP with preoperative and postoperative polysomnographic studies were included in this study. Two definitions of surgical success were used. The responder was defined, using a conventional criteria, as a 50% or more reduction in apnea index(AI) or apneahypopnea index(AHI) after UPPP, or a postoperative AI of <10 or AHI of <20. The initial cure was defined, using our own criteria, as a postoperative AI of <5 or AHI of <10. Complications were categorized in two groups : early(disorders during the first 10 postoperative days) and late. Results : Eighteen patients(69.2%) were responders, and ten patients(38.5%) were considered as initial cure. On the other hand, in five patients (19.2%), postoperative polysomnographic data demonstrated deterioration compared with preoperative data. Reduction rate of AI or AHI following UPPP was not significantly related to the preoperative body mass index, AI or AHI. There was no significant change of sleep architecture before and after UPPP in responder and initial cure groups. Early complications such as pain, dyspnea, bleeding, nasal reflux, dysphagia or wound disruption were observed in all patients. Late complications such as nasal reflux, voice change, dysphagia, loss of taste, pharyngeal dryness or foreign body sensation were discovered in 22 patients (84.6%). However, all early and late complications were of minor importance. Conclusion : The response to UPPP was favorable in approximately 70% of OSAS patient. However, the initial Cure rate of UPPP was relatively low. We suggest that selection of more appropriate surgical candidates and adequate surgical protocol is necessary to obtain a more successful result with UPPP.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.3.2-3
• /
• 1981

This paper was attemped to analize 55 cases of fiberoptic bronchoscopy during period of 3 years from Feb. 1978 till Feb. 1981 in Chung Ang University hospital. The results were as follow; 1) In age distribution; Most common age group was 5th decade (15 cases, 27.2%) and the other age groups showed relatively even distribution. 2) The ratio of male to female was 3 to 1. 3) The chief complaints were presented in following order; cough (52%), hemoptysis(25%), dyspnea(23.6%), chest pain(18%), chest disomfort(9%). 4) Direct smear of bronchoscopic aspiration material; Not found 33 cases (60%) were most common finding. In the founded bacteria Gram positive cocci 2 cases (3.6%), Gram negative cocci 2 cases (3.6%), Gram positive bacilli 1 cases (1.8%), Gram negativebacilli 2 cases (3.6%), mixed form 15 cases(27.2%) were presented. 5) Bacterial culture of bronchoscopic aspiration material; No growth 28 cases (50.9%) were most common finding. In the bacterial growth, alpha hemolytic streptococci 10 cases (18.2%), Neisseria group 7cases(12.7%), Klebsiella 2 cases (3.6%), Pseudomonas 2 cases (3.6%), mixed culture 6 cases (10.9%) were presented, 6) The diagnosis of bronchoscopic appearance, laboratory exam., and pathologic exam. of biopsed specimen were 21 cases (38.1%) primary carcinoma of bronchus, 8 cases (14.5%) pulmonary tuberculosis, 7 cases (12.7%) bronchitis in orders.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.80-88
• /
• 2014

This study was carried out to understand the effect of sowing date on growth characteristics, flower duration of a total of 6 domestic rapeseed cultivars, "Sunmang", "Tammiyuchae", "Tamlayuchae", "Naehanyuchae", "Yongsanyuchae" and "Hallayuchae" with different sowing dates (25 Sept., 5 Oct., 15 Oct., 25 Oct., 5 Nov.) in Muan, Jeollanamdo, Republic of Korea. The results obtained were summarized as the follows: The number of seedling stand after overwintering was decreased in all 6 cultivars. It changed little until 5 Oct., and then showed continuously largely decrease as the sowing date being delayed. As the sowing date was being delayed, plant height was decreased while Silique length and thousand seed weight were increased. Seed yield in all 6 cultivars decreased almost linearly with late sowing date. In correlation analysis between the delaying sowing date and growth characteristics, it was inversely correlated with plant height ($r=-0.769^{**}$), No. of branches/plant ($r=-0.760^{**}$), No. of siliqua/panicle ($r=-0.631^{**}$) and seed yield ($r=-0.946^{**}$), while showed a positive correlation with silique length (r=0.635), seed diameter ($r=0.629^{**}$) and thousand grain weight ($r=0.422^*$). No. of seeds/silique and seed set percentage were not significantly correlated with the delaying sowing date. The flower duration was long in order of Sunmang, Tammiyuchae, Yongsanyuchae, Naehanyuchae, Hallayuchae and Tamlayuchae. Varietal variation of flowering date was larger with early sowing date than with delaying sowing date. The range of flower duration across all cultivars was from 1 day of Tamlayuchae to 14 days of Sunmang according to the sowing date, and the end flowering date was able to be extended from 2 to 9 days, compared to normal date of end flowering.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.217-225
• /
• 2004

This study was carried out to reduce the loss of frozen dough quality during frozen storage. Using response surface method, ascorbic acid 160.4 ppm, L-cysteine 63.1 ppm, and SSL 0.6% were found to be optimum, with xanthan gum 0.3% (formula A) and Ultra tex-3 5% (formula B) added as cryoprotectants. During frozen storage at $-20^{\circ}C$, control rapidly deteriorated after 4 weeks, while formulas A and B showed slight deterioration with immutable quality after 10 weeks.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.196-202
• /
• 2006

Treatment of hepatitis B virus (HBV) with lamivudine is effective in suppressing virus replication and results in reduced inflammatory activity. However the most troublesome problem of lamivudine treatment is the emergence of lamivudine-resistant strains with amino acid substitution in the YMDD motif of DNA polymerase gene during the treatment. The aim of this study was to determine the mutation of YMDD motif (codon 552) and codon 528 in chronic HBV patients with lamivudine therapy using PCR-direct sequencing and to investigate the relationship between lamivudine mediated HBV mutation and HBeAg. HBV DNA was extracted from serum samples of HBV patients and amplified by nested PCR with two sets of primer pairs selected in HBV DNA polymerase gene. Amplified PCR product was analyzed by 2% agarose gel electrophoresis and direct sequencing. HBV mutation was detected in 124 out of 207 samples (60%). Single mutation was 50.8% for M552I, 43.5% for M552V, 5.7% for M552I/V and the L528M mutation was 67.0%. Double mutation was 43.6% for M552V/L528M, 33.1% for M552I/L528(wild type), 17.7% for M552I/L528M and 5.6% for M552I/V/L528M. Serine mutation at YMDD motif (M552S) was not found and the L528M mutation frequently accompanied M552V type. In this study, the typical difference of frequencies for HBV mutation depending on HBeAg was not found. Moreover, the PCR-direct sequencing method used in this study might be a powerful tool for the mutation study in clinical reference laboratories with high volume.

• The Korean Journal of Financial Management
• /
• v.21 no.2
• /
• pp.99-123
• /
• 2004

We focus in this study on incremental financing decisions and estimate a logit model for the probability a firm will choose a private placement over a public bond issue. We hypothesize that information asymmetry, financial risk, agent cost, and proprietary information may affect a firm's choice between public debt and private placements. We find that as the size of firm increases, the probability of choosing a private placement declines significantly. The age of the firm, however, is not a significant factor affecting the firm's choice between public and privately-placed bond. The coefficients on the firm's leverage and non-investment grade dummy are significantly positive, meaning firms with high financial risk and credit risk select private placements. The findings regarding agency-related variables, PER and Tobin's Q, are somewhat complex. We find significant evidence that firms with high PER prefer private placements to public bonds, suggesting that borrowers with options to engage in asset substitution or underinvestment are more likely to choose private placements. The coefficient of Tobin's Q is negative, but not significant, which weakly support the hold-up hypothesis. When we construct an interaction term on the Tobin's Q with a non-investment rating dummy, however, the Tobin's Q interaction term becomes positive and significant. Thus, high Tobin's Q firms with a speculative rating are significantly more likely to choose a private placement, regardless of the potential hold-up problems. The ratio of R&D to sales, proxy for proprietary information, is positively significant. This result can be interpreted as evidence in favor of a role for proprietary information in the debt sourcing decision process for these firms.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.94-105
• /
• 2009

Black locust (Robinia pseudoacacia) stand is representative lowland exotic plantation with low ecological quality and arrested succession in South Korea. To facilitate succession and restore natural vegetation, small canopy gaps (${\sim}57m^2$), which can modify minimally structural variables and reduce restoration related disturbances on stand, was established in the black locust stand, and oak (Quercus serrata) seedlings were introduced in the gap. Two types of varying levels were introduced for gap creation; cutting (C) and girdling (G) on canopies. Understory removal (CU and GU) treatment was applied as subtypes of structural modification. Growth (diameter, height and leaf area) of target species and responses (species composition, diversity and coverage) of understory community were monitored during study years (2007~2008). Canopy openness was different significantly among treatments but not for light availability. Based on the result of logistic regression, growth of height and leaf area of seedlings were significant variables on seedling survival. Height and leaf area of seedlings were increased during study years, although radial growth was reduced. During study years, there were no significant differences in species composition and diversity, and total coverage increased about 20%. Increase of resources by gap creation and understory removal likely affect growth of target species. Small gap creation was effective to reduce understory responses in composition and diverstiy. Synthesized, growth of target species and responses of understory community to small canopy gap creation exhibited, in short term, possibility of utilization in alternative forest restoration and management option. Long-term monitoring is necessary to certificate effect of artificial gap creation on forest restoration.