• Electronics and Telecommunications Trends
• /
• v.27 no.5
• /
• pp.1-9
• /
• 2012

탄소 원자가 육각형의 벌집 모양으로 이차원구조체를 이룬 그래핀은 2004년 처음 실험적으로 흑연으로부터 떼어낼 수 있는 방법이 발표되면서 그 존재가 확인되었고 이후 여러 가지 독특하고 우수한 물성들이 속속 발표되면서 많은 연구자들의 주목을 받고 있다. 수많은 그래핀 연구자들은 천연 그래핀뿐만 아니라 대면적의 그래핀을 성장하고 숨겨진 전기적, 광학적 물성을 밝히고 제어하는 기술에 대한 기초 연구로부터 제어된 그래핀의 물성을 이용한 다양한 전자소자 및 광전소자로의 응용 기술에 대해 많은 연구를 진행하고 있다. 본고에서는 최근에 이루어진 그래핀 기반의 전자소자와 광전소자에 관한 연구 동향을 몇 가지 예와 함께 소개하고 ETRI 그래핀소자창의연구실의 연구주제와 앞으로의 연구 방향에 대해 살펴보고자 한다.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 1996.11a
• /
• pp.103-109
• /
• 1996

The GTD-MM hybrid technique, which is used for analyzing elctromagnetic scattering problems of infinite scatterer or scatterers having no analytic solutions, requires knowledges about the diffracted current by the scatterers. And the technique determines the extent of moment method analysis area and the position of GTD matching points empirically. But these parameters give considerable effects to the accuracy of the solution. So we examine the problems and try to seek some practical guidance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.11a
• /
• pp.69-76
• /
• 1992

섬유강화 복합재료의 동탄성계수와 감쇠특성을 규명하기 위하여 랜덤하게 분포된 무한 실린더 형상의 산란체를 가진 점탄성 매질내에서 , 축방향으로 분극되어 조화 운동을 하는 탄성파의 전파에 관하여 연구하였다. 다중 산란에 관한 이론으 이용하여 매질내에서의 파동전파 특성을 내포하는 분산관계식을 얻었다. 다중산란에 의한 실린더간의 상호작용을 수식화하기위하여 필요한 실린더의 쌍분포함수는 몬테카를로 모의 실험을 이용하여 구하였다. 수치적으로 구한 감쇠계수 및 유효전단강성을 주파수와 체적율의 함수로 제시하였다. 또한 감쇠계수의 주파수에 따른 변화에 있어서, 저주파에서는 매질의 점탄성 손실이 지배적이며, 고주파수로 갈수록 다중산란에 의한 손실이 지배적인 것으로 나타났다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.12-15
• /
• 1993

Critical shortage of natural aggregate for production of concrete is developing in many urban area. At the same time increasing quantities of demolished concrete form deteriorated and obsolete structures are generated as a waste material in the same areas. The reuse of a waste concrete may settle the problems of environmental pollution and shortage of adquate aggregate, Therefore, this study is to reuse a waste concrete as aggregate for concrete, It is the purpose of this present study to investigate and analyze how the addition rates of superplasticizer and curing condition affect the properties of fresh and hardened recycled aggregate concrete comparing with those of ordinary concrete and crushed stone concrete.

• Tribology and Lubricants
• /
• v.18 no.6
• /
• pp.389-395
• /
• 2002

The surface temperature at the interface of bodies in a sliding contact is one of the most important factors influencing the behavior of machine components. The calculation of the surface temperature at a sliding contact interface has been an interesting and important subject for tribologist. Temperature analyses were usually performed under the consideration contacted two bodies as semi-infinite. But the analysis was difficulty in being applied to finite body and considering the boundary condition. In this study, contact temperature rise of two finite bodies and surfaces due to frictional heating under the rectangular and the circular sliding contact is calculated. Heat partition factor is calculated using semi-infinite solid analysis and the temperature of the finite bodies is calculated using FVM. It will be shown that Most frictional heat in the fore part of contact region for sliding direction is conducted into body that has a moving heat source and the site of the maximum temperature rise moves to the opposite direction of sliding during sliding.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.38-38
• /
• 2003

전리층은 우주환경의 변화에 매우 중요한 역할을 하고 있다. 그 중 전리층에서 발생하는 오로라는 우주환경의 변화를 가시적으로 보여주는 유일한 현상이다. 본 연구에서는 오로라 타원체를 따라 흐르는 오로라 제트전류의 위도에 따른 분포를 알아보고 그 특징을 조사하였다. 그리고 오로라 발생지역과 이들 전류분포를 비교하였으며 전기장과 전기전도도를 계산하여 오로라 제트전류에 대한 상대적인 기여도를 알아보았다. 먼저 CANOPUS 지자기 관측소의 1998년 데이터를 사용하여 1년간 발생했던 Isolated Substorm을 추려내었다. 그리고 이들 Substorm이 발생하는 동안 위도에 따른 오로라 제트전류 분포의 특징을 구하여 전류의 방향에 따라 이들 분포가 어떠한 형태로 나타나는지 알아보았으며, 이때 오로라 발생지역과의 연관성을 조사하였다. 여기서 전리층에 흐르는 전류를 무한판상으로 가정하여 오로라 제트전류의 분포를 지자기변화 성분으로부터 추론하였다. 또한 DMSP의 하강입자를 이용하여 계산한 전기전도도를 이용해 전기장을 추정함과 동시에 오로라제트전류에 대한 이들의 상대적 기여도를 조사해보았다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.160-165
• /
• 1999

Osmotic pressure induced by semi-permeability of hardened cement pasts and cement mortar was studied, which was considered to be a cause of failure such as separation and blistering of floor coatings or wall coatings from the concrete substrate. The specimens with a water cement ratio of 45, 60 and 75% were installed between the solution of sodium chloride and distilled water. First, we measured water flux from distilled water to sodium chloride and the ion flux of Na+ and Cl- through the specimens. Then, we measured osmotic pressure induced by semi-permeability of the specimens using an apparatus which was specially developed for this study. It was made clear that hardened cement paste and cement mortar have properties of semipermeability, and the osmotic pressure is closely related to their water cement ratio. Finally, we calculated the osmotic pressure according to Staverman's equation, which was obtained for organic membranes, and tried to explain quantitatively the observed pressure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.789-792
• /
• 2005

Development of high-strength concrete and improved durability has brought new opportunities to the construction industry. However, some attention was given to characteristics of such concrete, in particular with respect to their cracking sensitivity. It has been argued and demonstrated experimentally that a low water/cement ratio concrete undergoes shrinkage due to self-desiccation. This so-called autogenous shrinkage cracking is a major concern for concrete durability. One possible method to reduce cracking due to autogenous shrinkage is the addition of expansive additive. Tests conducted by many researches have shown the beneficial effects of addition of expansive for reducing the risk of shrinkage-introduced cracking. This paper aimed at forecasting deformation of high strength cement paste with expansive additive for early age.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.337-338
• /
• 2009

Use of the recycled fine aggregate as a material of structural concrete is not easy currently because there are some problems, such as of quality control and the uncertainty of chemical and physical property. Thus, the results indicate that it is possible to produce high quality recycled fine aggregate for structure by microwave heating technology, friction and abrasion action.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.341-348
• /
• 2001

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions.