• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.113-120
• /
• 2014

This study will evaluate the effectiveness of various pretreatments when fiber-reinforced composite (FRC) post is bonded to endodontically treated tooth with resin cement. Materials and methods: Canal shaping of FRC post (DT Light post, Size 3, Bisco Inc., Schaumburg, IL, USA) was performed on endodontically treated premolars at 1.5 cm from CEJ. Samples were divided into 6 groups of surface treatment after conventional washing and drying to the canal. Total of 24 FRC posts were randomly divided into 6 groups of surface treatment as follows: Group C: control - no surface treatment, Group A: airborne-particle abrasion (Cojet sand, 3M ESPE), Group S: silanization (Bis-silane, Bisco Inc.), Group M: universal primer (Monobond-plus primer, Ivoclar Vivadent Inc.), Group AS: silanization after airborne-particle abrasion, Group AM: universal primer treatment after airborne-particle abrasion. Pretreated fiber posts were cemented with resin-based luting material and photo-polymerized and cut to the thickness of 1 mm. Push-out test using a universal testing machine was performed. Bonding failure strength of post dislodgement was measured and the type of bonding failure was classified. Data were analyzed with Kruskal-Wallis test and multiple comparison groups were performed using Tukey HSD value of rank test (${\alpha}=0.05$). Results: Group AS showed significantly highest bonding strength. Group S, group AM, group A, and group M showed lower bonding strength in order. The control group showed the lowest bonding strength. Conclusion: Surface treatment with silane showed to be the most effective of the surface pretreatment methods for cementation of FRC post. Surface treatment with universal primer showed no significant difference compared with no surface treatment group as for bonding strength.

• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.359-368
• /
• 2000

The purpose of this study is to develope and apply NIE programs related to sub-chapter 'The Change of Weather and Circulation of Water' in 2nd grade science text book of middle school, and thereby to investigate the effects of NIE approach on science-related attitude and teaming achievement of students, and interaction between treatment methods and students' learning ability. Subjects consisted of 2nd grade students of four classes in a girls middle school located at the southern part of Seoul. Four classes were divided into experimental and control groups by two classes randomly. The experimental groups have been instructed on the related-general concepts for six times and then received seven NIE programs developed by researcher for seven times. The control groups have received the instruction through the conventional teaching method. The NIE learning has been progressed following the steps using in the Iowa Chautaugua Program, e.g. invite, explore, propose explanation and solutions, and take action. NIE programs, e.g. project studying, topic studying and a crossword puzzle have been developed and applied using 'science first' approach of the STS instruction. Twenty questions related to social implications of science and leisure interest in science within seven frameworks of TOSRA have been used in this study as an evaluation instrument of science-related attitude. Learning achievement has been evaluated using an instrument developed by researcher. The results of this study can be summarized as follows. (1) NIE approach was more effective in progressing learning achievement of middle school students than conventional teaching method (p<.01). (2) Experimental groups show statistically significant improvement on science-related attitude than control groups (p<.01). There were no significant interactions between treatment methods and students' learning ability on learning achievement and leisure interest in science. The NIE approach were more effective than the conventional one on social implications of science, especially to low ability students.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.182-190
• /
• 2009

Statement of problem: Microleakage at the occlusal and gingival margin of Class V cavities restored with composite resin has traditionally been considered an obstacle to successful restoration. Purpose: The aim of this study was to assess the effectiveness of three different surface sealants(Fortify, Permaseal and Biscover LV) on the marginal sealing of Class V light-activated composite resin restorations(Z250). Material and methods: Forty noncarious human premolars and molars extracted within a three-month period were selected. Class V cavities with the occlusal margin in enamel and gingival margin in cementum were prepared in both buccal and lingual surfaces. The teeth, randomly assigned in four groups with twenty cavities in each group, were restored with composite resin after applying an adhesive system(Clearfil SE bond). After the finishing and polishing procedures, the restorations were covered with a specific surface sealants, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled, and immersed in a 2% methylene blue solution for twenty four hours and sectioned longitudinally. The marginal microleakage was evaluated at the occlusal and gingival interfaces using a microscope and compared among the four groups using ANOVA test and Wilcoxon Rank-Sum test($\alpha$=0.05). Results: Statistical analysis showed that there was significantly less leakage when the surface sealants were used than there was in control group(P<.05). There were no significant differences of microleakage at occlusal and gingival margins among groups. There were no significant differences between microleakage of occlusal and gingival margins in each group. Fortify was not statistically different from control group at the gingival margin(P>.05). Conclusion: Application of surface sealants was an effective method of surface coating in reducing microleakage at occlusal and gingival margins of Class V composite resin restorations. However, it is certain that some microleakage still occurred despite the application of surface sealants, especially gingival margins.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.380-385
• /
• 1998

This study evaluated the possible utilization and the replacing range of animal by-product mixture (ABPM) as a dietary fish meal replacer in growing common carp (Cyprinus carpio). ABPM is a mixture of leather meal, meat and bone meal, blood meal and squid liver powder at a specific weight based ratio. Five different diets were formulated on isonitrogenous and isocaloric basis of $40\%$ crude protein and 15.3 KJ/g diet in which white fish meal (WFM) protein was substituted with the ABPM Protein as follows: diet 1, $100\%$ WFM ($0\%$ ABPM, control); diet 2, $75\%$ WFM+$25\%$ ABPM ($25\%$ ABPM); diet $3,\;50\%$ WFM+$50\%$ ABPM ($50\%$ ABPM); diet 4 $25\%$ WFM+$75\%$ ABPM ($75\%$ ABPM); diet $5.0\%$ WFM+$100\%$ ABPM ($100\%$ ABPM). As the dietary protein sources, each diet contained $34.7\%$ of animal protein supplied by white fish meal and/or ABPM and $65.3\%$ of plant protein. After one week of conditioning period, fish averaging 10 g were randomly assigned to each diet treatment as triplicate groups and fed one of the experimental diets for 12 weeks. Weight gain of fish fed diet 1 (control) and 3 were significantly higher than those of fish fed diet 2, 4 and 5 during the first 4 weeks (P< 0.05), while there were no significant differences among all diet groups during the third 4 weeks (P>0.05). Feed conversion ratio of fish fed diet 1 was significantly higher than those fed diet 2, 3, 4 and 5 during the second 4 weeks (P<0.05), while there were no significant differences among all diet groups during the first and the third 4 weeks (P<0.05). There were no significant differences in proximate analysis among fish fed the experimental diets either for the second 4 weeks or the third 4 weeks (P>0.05). These results indicated that ABPM could be used as a fish meal replacer up to $100\%$ in growing common carp.

• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.83-91
• /
• 2011

Purpose: Microfracture has been used as a first-line treatment to repair articular cartilage defects. In this study, a new technique using an extracelluar matrix biomembrane to cover the cartilage lesions after microfracture was evaluated in terms of cartilage repairability and clinical outcome compared with conventional microfracture technique in a prospective randomized trial. Materials and Methods: A total of 53 patients (59 cases) without osteoarthritis who had focal full thickness articular cartilage lesions were randomly assigned in two group. Seventeen patients (17 cases) underwent conventional microfracture procedure (control group) and thirty-six patients (42 cases) received microfracture and placing biomembrane cover (ArtiFilm$^{TM}$) concomitantly (experimental group). Clinical assessment was done through 6 months postoperatively using the subjective International Knee Documentation Committee IKDC questionnaire, and visual analog scale (VAS) for pain and satisfaction. Magnetic resonance imaging (MRI) was performed at 6 months after the operation in all patients. Results: In clinical outcomes, the significant difference was observed between both groups in IKDC, but not in VAS for pain and for satisfaction (final outcomes of IKDC, p=0.001; VAS for pain, p=0.074; VAS for satisfaction, p=0.194). The MRI showed good to complete defect fill (67 to 100%) in 33 patients (78.6%) of experimental group and 4 patients (23.5%) of control group, respectively. In control group, 9 of 17 patients (52.9%) showed poor defect fill (less than 33%), whereas 5 (11.9%) in experimental group (p=0.001). Assessment of peripheral integration revealed no gap formation in 35 patients (83.3%) in experimental group and 6 patients (35.3%) in control group (p=0.001). No serious complications or adverse effects related to the biomembrane were found. Conclusion: Good short-term follow-up clinical results were obtained in the group whose cartilage defects in the knee joint were covered with biomembrane after the microfracture, with the MRI findings confirming the excellent regeneration of the defective cartilage area. This suggests that the surgery to cover the defective area with biomembrane (ArtiFilm$^{TM}$) after the microfracture procedure is a safe, more effective treatment to induce cartilage regeneration.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.10-16
• /
• 2011

Purpose: The partial volume effect occurs because of limit of the spatial resolution. It makes partial loss of intensity and causes SUV to be lower than it should actually be. So the purpose of this study is to calculate recovery coefficient for correcting PVE from phantom study and to compare before and after SUV correction applying to PET/CT examination. Materials and Methods: The flangeless Esser PET phantom consisting of four hot cylinders was used for this study. All of the hot cylinders were filled with FDG solution of 20.72 MBq per 1000 ml, and the phantom background was filled with FDG solution of different concentrations (33.30, 22.20, 16.65 MBq per 6440 ml) to yield H/B ratios of around 4:1, 6:1 and 8:1. Using the Biograph Truepoint 40(SIEMENS, Germany), we applied recovery coefficient method to 30 patients who were diagnosed with lung cancer after PET/CT exam. And then we analyzed and compared SUV before and after correcting partial volume effect. Results: The smaller the diameter of hot cylinder becomes, the more recovery coefficient decreased. When we applied recovery coefficient to clinical patients and compared SUV before and after correcting PVE, before the correction all lesions gave an average max SUV of 7.83. And after the correction, the average max SUV increases to 10.31. The differences in the max SUV between before and after correction were analyzed by paired t test. As a result, there were statistically significant differences (t=7.21, p=0.000). Conclusion: The SUV for quantification should be measured precisely to give consistent information of tumor uptake. But PVE is one of factors that causes SUV to be lower and to be underestimated. We can correct this PVE and calculate corrected SUV using the recovery coefficient from phantom study. And if we apply this correction method to clinical patients, we can finally assess and provide quantitative analysis more accurately.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• The Journal of Society for e-Business Studies
• /
• v.24 no.1
• /
• pp.1-16
• /
• 2019

Recently, since responding to meteorological changes depending on increasing greenhouse gas and electricity demand, the importance prediction of photovoltaic power (PV) is rapidly increasing. In particular, the prediction of PV power generation may help to determine a reasonable price of electricity, and solve the problem addressed such as a system stability and electricity production balance. However, since the dynamic changes of meteorological values such as solar radiation, cloudiness, and temperature, and seasonal changes, the accurate long-term PV power prediction is significantly challenging. Therefore, in this paper, we propose PV power prediction model based on deep learning that can be improved the PV power prediction performance by learning to use meteorological and seasonal information. We evaluate the performances using the proposed model compared to seasonal ARIMA (S-ARIMA) model, which is one of the typical time series methods, and ANN model, which is one hidden layer. As the experiment results using real-world dataset, the proposed model shows the best performance. It means that the proposed model shows positive impact on improving the PV power forecast performance.

• Journal of Oral Medicine and Pain
• /
• v.31 no.2
• /
• pp.185-197
• /
• 2006

The aim of this study was to investigate the beneficial effect of a daily dose of 300 mg of ASU taken for more than 3 months on the subjects diagnosed as osteoarthritis of temporomandibular joint by RDC/TMD. Total 68 outpatients(15-54y) of female except menopause in Orofacial Pain Clinics of the Pusan National University Hospital were randomly assigned to either an ASU group(n=36) or a placebo group(n=32). The pain, noise and limited mouth opening(LOM) were evaluated by numerical analogue scale(NAS, range 0-10) and maximum comfortable opening(MCO) were measured by milimeter scale. The difference of simple uptake rate(SUR) on bone scan, hot spot(HS) on coronal SPECT, condylar bony changes on CT between the ASU and placebo groups were compared to investigate the objective effect. The obtained results were as follows. 1. Comparison of the NAS of pain, noise, LOM and MCO before treatment and 3, 6 and 9 months after treatment showed no significant difference between the ASU and placebo groups. 2. Comparison of the NAS of pain, noise, LOM and MCO before treatment and 3, 6 and 9 months after treatment showed no significant difference between the ASU and placebo groups without splint treatment, but showed more increased MCO in the ASU group than the placebo group with splint treatment at 6, 9 months after treatment. 3. Comparison of the NAS of pain before treatment and 3, 6 and 9 months after treatment that the NAS of pain at first visit divided into two groups(above or below 6) showed more decreased the NAS of pain in the ASU group than the placebo group that the NAS of pain at first visit was above 6. 4. Comparison of the NAS of pain, noise, LOM and MCO during 6 months period showed improvement of clinical symptoms within group, but no significant difference between subjects. 5. The simple uptake ratio(SUR) on bone scan and hot spot(HS) on coronal SPECT showed more increased SUR and HS in affected side than non-affected side of the ASU and placebo groups. 6. Comparing of condylar bony changes, osseous remodeling were observed highest, osteophyte lowest in the affected and non-affected side of the two groups. After treatment, comparison of condylar bony changes were observed more decreased erosive features in the ASU group than the placebo group.

• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.1-7
• /
• 1999

In this study, the dose distributions of a $^{32}$ p uniform cylindrical volume source and a surface source, a pure $\beta$emitter, were calculated in order to obtain information relevant to the utilization of a balloon catheter and a radioactive stent. The dose distributions of $^{32}$ p were calculated by means of the EGS4 code system. The sources are considered to be distributed uniformly in the volume and on the surface in the form of a cylinder with a radius of 1.5 mm and length of 20 mm. The energy of $\beta$particles emitted is chosen at random in the $\beta$ energy spectrum evaluated by the solution of the Dirac equation for the Coulomb potential. Liquid water is used to simulate the particle transport in the human body. The dose rates in a target at a 0.5mm radial distance from the surface of cylindrical volume and surface source are 12.133 cGy/s per GBq (0.449 cGy/s per mCi, uncertainty: 1.51%) and 24.732 cGy/s per GBq (0.915 cGy/s per mCi, uncertainty: 1.01%), respectively. The dose rates in the two sources decrease with distance in both radial and axial direction. On the basis of the above results, the determined initial activities were 29.69 mCi and 1.2278 $\mu$Ci for the balloon catheter and the radioactive stent using $^{32}$ P isotope, respectively. The total absorbed dose for optimal therapeutic regimen is considered to be 20 Gy and the treatment time in the case of the balloon catheter is less than 3 min. Absorbed doses in targets placed in a radial direction for the two sources were also calculated when it expressed initial activity in a 1 mCi/ml volume activity density for the cylindrical volume source and a 0.1 mCi/cm$^2$ area activity density for the surface source. The absorbed dose distribution around the $^{32}$ P cylindrical source with different size can be easily calculated using our results when the volume activity density and area activity density for the source are known.