• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.89-94
• /
• 2006

A compact microstrip band-selective filter for ultra-wideband(UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator band-stop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band(3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is $29\;\%$ size reduction in footprint compared to the traditional band-stop filter using L-shaped resonators. The measured results show that the filter has a wide passband of $146.7\;\%$(2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of $10.04\;\%$(5.2 GHz to 5.75 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.774-783
• /
• 2007

This paper presents an integrated packaging antenna-diplexer module for wireless communication systems in the Cellular and SDMB band. The design and the realization of the proposed one are experimentally analyzed and discussed. It consists of a dual-resonance antenna and a diplexer with a multi-layer LTCC(${\varepsilon}_r=7.8,\;tan\;{\delta}=0.0043$) technology with integration capability and low loss. The dual-resonance antenna of the proposed module has the meander line structure for size reduction and has the shorting structure of an inverted F antenna to achieve good impedance matching. The diplexer of the proposed module was designed with the combination of low pass filter(LPF) and high pass filter(HPF). Decreasing the mutual interference between them provides a high isolation characteristic. The proposed antenna-diplexer module with dimensions of $27.5{\times}12.0{\times}2.2mm$ operates within a range from 813 MHz to 902 MHz for the cellular band and from 2,586 MHz to 2,655 MHz for the SDMB band. And the measured gain of the fabricated module is -1.96 dBi for Cellular band and -5.43 dBi for SDMB band. The parameters for the antenna-diplexer module are investigated and the several performances are discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.13-20
• /
• 2008

This paper describes the design of low power 12bit Digital-to-Analog Converter(D/A Converter) using Pseudo-Segmentation method which shows the conversion rate of 80MHz and the power supply of 1.8V with 0.18um CMOS n-well 1-poly 6-metal process for advanced wireless communication system. Pseudo-segmentation method used in binary decoder consists of simple parallel buffer is employed for low power because of simpler configuration than that of thermometer decoder. Also, using deglitch circuit and swing reduced drivel reduces a switching noise. The measurement results of the proposed low power 12bit 80MHz CMOS D/A Converter shows SFDR is 66.01dBc at sampling frequency 80MHz, input frequency 1MHz and ENOB is 10.67bit. Integral nonlinearity(INL) / Differential nonlinearity(DNL) have been measured ${\pm}1.6LSB/{\pm}1.2LSB$. Glich energy is measured $49pV{\cdot}s$. Power dissipation is 46.8mW at 80MHz(Maximum sampling frequency) at a 1.8V power supply.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1189-1193
• /
• 2010

Mobility management is one of the most important research issues in 6LoWPAN, Since the IP-WSN application domain is expanded to real-time applications such as healthcare and surveillance systems, a fast and seamless handover becomes an important criterion in 6LoWPAN. However, a draft of IETF 6LoWPAN WG for mobility support does not decrease handover delay. Although LoWMob supports a fast intra-PAN handover. it can be supported when the infrastructure node has the location information of the other nodes in the mobile node's moving direction. In this paper, we propose a fast and seamless mobility protocol to support intra-PAN handover, named intra-MARIO. In intra-MARIO, a parent node of the mobile node preconfigures its handover to the PAN when the parent node detects its movement, thereby reducing the handover delay. Since intra-MARIO also supports route optimization, the mobile node can communicate with its corresponding nodes through the optimal route. In this paper, we analysis the signaling cost and evaluates that the handover can be completed in 20ms by simulation.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.78-87
• /
• 2011

A variety of intelligent application using the sensor network system is being studied. In general, the sensor network consists of nodes which equipped with a variety of sensing module and is utilized to collect environment information. Recently, the demands of multimedia data are increasing due to the demands of more detailed environmental monitoring or high-quality data. In this paper, we overcome the limitations of low bandwidth in Zigbee-based sensor networks and propose a routing algorithm for real-time multimedia data transmission. In the previously proposed algorithm for multimedia data transmission occurs delay time of routing setup phase and has a low data transmission speed due to bandwidth limitations of Zigbee. In this paper, we propose the hybrid routing algorithm that consist of Zigbee and Bluetooth and solve the bandwidth problem of existing algorithm. We also propose the disjointed multipath setup algorithm based on competition that overcome delay time of routing setup phase in existing algorithm. To evaluate the superiority of the proposed algorithm, we compare it with the existing algorithm. Our experimental results show that the latency was reduced by approximately 78% and the communication speed is increased by approximately 6.9-fold.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.135-139
• /
• 2007

Recently Data Centric Storage (DCS) schemes are variously studied for several applications (e.g. natural environment investigation, military application systems and environmental changes monitoring). In DCS scheme, data is stored at nodes within the network by name. There are several drawbacks in the existing schemes. The first is the inefficiency of the range query processing on not considered the locality of store point. the second is the non-homogeneity of store load of each sensors in case of the sensor distribution density is non-uniformed. In this paper, we propose a novel data centric storage scheme with the sensor distribution density which satisfied with the locality of data store location. This scheme divides whole sensor network area using grid and distributes the density bit map witch consist of the sensor density information of each cell. sensors use the density bit map for storing and searching the data. We evaluate our scheme with existing schemes. As a result, we show improved load balancing and more efficient range query processing than existing schemes in environment which sensors are distributed non-uniform.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.685-691
• /
• 2008

Recently with the rapid evolution of the mobile computing and communication technologies, mobile VOD service becomes increasingly important for wireless mobile users. The VOD service is being widely used in various areas of application, such as education, entertainment and business, because it provides users convenience in easily having access to video information at any time in any places. However, in reality, the mobile system has many difficulties in providing the smooth VOD service owing to frequent transfers and cutoffs of clients. The importance of a technique to transmit broadcasting is being stressed as a method for providing stabler mobile VOD service to a large number of clients. This paper is aimed at showing how to reduce demands for server bandwidth and delay of earlier service through performance analysis by suggesting an effective VOD broadcasting transmission technique through channel division in the mobile atmosphere. Many researches have been made about regular broadcasting techniques in particular. This study divides the methods used for assigning channels which have been decided by the size of segments into a group of regular channels and assistant channels using wireless gap-fillers to provide effective VOD services to a large number of clients at the mobile environment using small bandwidth resources. The regular channels transfer regular streams, while assistant channels repeatedly transfer the first segment to reduce early service delay time to receive regular streams. In this way, the study suggests a technique to reduce server bandwidth demand and early service delay time. Through the proposed technique, the server bandwidth demand could be reduced by more than 30 percent and the study continuously shows reduced early service delay time through conducting performance analysis.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.331-338
• /
• 2011

The RFID system includes a section of wireless communication between the readers and the tags. Because of its vulnerability in terms of security, this part is always targeted by attackers and causes various security problems including the leakage of secret and the invasion of privacy. In response to these problems, various protocols have been proposed, but because many of them have been hardly implementable they have been limited to theoretical description and theorem proving without the accurate verification of their safety. Thus, this study tested whether the protocol proposed by Kenji et al. satisfies security requirements, and identified its vulnerabilities such as the exposure of IDs and messages. In addition, we proposed an improved RFID security protocol that reduced the number of public keys and random numbers. As one of its main characteristics, the proposed protocol was designed to avoid unnecessary calculations and to remove vulnerabilities in terms of security. In order to develop and verify a safe protocol, we tested the protocol using Casper and FDR(Failure Divergence Refinements) and confirmed that the proposed protocol is safe in terms of security. Furthermore, the academic contributions of this study are summarized as follows. First, this study tested the safety of a security protocol through model checking, going beyond theorem proving. Second, this study suggested a more effective method for protocol development through verification using FDR.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.97-103
• /
• 2004

In this paper, we propose a high speed block turbo code decoding algorithm and an efficient hardware architecture. The multimedia wireless data communication systems need channel codes which have the high-performance error correcting capabilities. Block turbo codes support variable code rates and packet sizes, and show a high performance due to a soft decision iteration decoding of turbo codes. However, block turbo codes have a long decoding time because of the iteration decoding and a complicated extrinsic information operation. The proposed algorithm using the threshold that represents a channel information reduces the long decoding time. After the threshold is decided by a simulation result, the proposed algorithm eliminates the calculation for the bits which have a good channel information and assigns a high reliability value to the bits. The threshold is decided by the absolute mean and the standard deviation of a LLR(Log Likelihood Ratio) in consideration that the LLR distribution is a gaussian one. Also, the proposed algorithm assigns '1', the highest reliable value, to those bits. The hardware design result using verilog HDL reduces a decoding time about 30% in comparison with conventional algorithm, and includes about 20K logic gate and 32Kbit memory sizes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.3
• /
• pp.50-56
• /
• 2010

In this paper, compact broad-band antenna using circular spiral slot and CPW (coplanar waveguide) feed is proposed. The proposed antenna is designed on the same plane of the substrate by using CPW fed structure, archimediean spiral slot structure. So it was achieved both the size of compact antenna and the broad band. A archimediean spiral slot structure is introduced for resonance of medium band operation. The distances of a CPW feeder line and a ground plane are modified for impedance matching and lower/higher band operation. The proposed antenna has a compact size ($8mm\;{\times}\;13mm$) and it is etched on the FR-4 (relative dielectric constant 4.4, thickness 0.8mm) dielectric substrate. The simulated impedance bandwidth (VSWR $\leq$ 2) and maximum gain of the proposed antenna are 5.98GHz (4.1GHz ~ 10.08GHz) and 3.97dBi, respectively. The measured impedance bandwidth (VSWR $\leq$ 2) and maximum gain of the proposed antenna are 6.02GHz (4.48GHz ~ 10.5GHz) and 2.68dBi, respectively. The simulation and measured result shows good impedance matching and radiation pattern over the interesting frequency bands. It can be applied to antenna of broad-band wireless communication system.