• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.7-12
• /
• 2006

최근 환경문제에 대한 해결책으로 목조건물의 해체 및 목재의 재사용에 대한 관심이 높아지고 있다. 목조건물을 접합철물에 의해서 접합할 경우에는 건물의 해체시에 철재를 사용하지 않아 목부재의 절단이 매우 용이하고 목재의 재사용이 용이하도록 하는 장점을 가지고 있다. 대나무의 높은 인성은 목재 접합부의 강도와 안정성 확보를 가능하게 해주고 있다. 대나무 접합물은 2005년 일본 Aichi 세계박람회에서 Japan pavilion Nagakute 전시관 건물이 대나무 접합부를 사용한 목조건물이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.93-100
• /
• 2015

Modern wooden structures usually are connected with steel fastener type connectors. And joints using multiple connectors in wooden structures will form semi-rigid connection. If connection in wooden structure would be designed to be pinned joint, the underestimate for loads transmitted through connection, would result in the deficient capacity of resistance in connection. And if joints in wooden structures would be assumed to be fully-rigid joint, amount of fasteners needed at the connection could be excessively increased. It will give a bad effect in the view of beauty, constructability and economy. Estimate for the reasonable stiffness of connection might be essential in design of reasonable connection in wooden structure. This paper will suggest analysis modelling technique that can represent approximate stiffness of connections using a common analysis program for double shear connection in order to give help in performing easily the design of wooden structure. It is verified that the suggested approximate analysis modelling technique could represent the behavior in connection by comparing the analysis results with test results for tensile, bending moment.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.251-259
• /
• 2006

In some cases, wooden structures are used for medium-rise buildings. It is therefore necessary to develop and test a new structural system for medium-rise buildings using wooden structures. This study deals with high-performance, laminated, timber-based composite members, which consist of structural laminated timber and H-beam. Simple beam tests were performed to determine the strength, stress distributions, and failure patterns of laminated timber. The main parameters are the insertinglength (1, 1.5, and 2 times the H-beam height) and the epoxy between the top/bottom flange of the H-beam and the top/bottom flange of the laminated timber. The results of the test show that the specimen with an inserting length that is 2 times the H-beam height was characterized by fairly god strength and stiffness.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.211-220
• /
• 2013

The nailed joints in wood construction are commonly designed to resist and carry the lateral load but also subject to withdrawal force like uplift load due to the wind. This research was conducted to evaluate the performance of nailed joint composed of dimension lumber and sheathing materials through the nail withdrawal and unsymmetric double shear joint test, and then compared to current design values. The withdrawal strength was greatly dependant on wood specific gravity, and the withdrawal strength of I-joist with OSB showed higher value in spite of low specific gravity. The maximum withdrawal loads were greater than that of derived current design values about 5 times. The lateral resistance of Japanese larch/OSB nailed joints was higher than that of SPF/OSB nailed joint, and derived allowable lateral strength of nailed joints in this study exceeded the current design values. The failure mode of nailed joints was primarily due to the nail bending and this tendency was notable in SPF/OSB nailed joint.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.26-36
• /
• 2008

As the height of the light-framed building increases, the lateral load and overturn-moment are increased and the possibility of the building overturn becomes larger. Because the shear wall resists lateral load in light-framed building, the reinforcement of shear wall is required. In order to reinforce the light-framed shear wall, using lag screw fastener type (B-HD) and using bolt type (S-HD) hold-down connectors were applied for test. And domestic larch lumbers, $38{\times}140mm$ and $89{\times}140mm$, KS 2nd grade, were used for the stud. The North American OSB panels were used for sheathing panel. Static loads, load speed 6 mm/min, were applied on top of the wall. As a result, shear strength of the wall that using hold-down connector was improved sufficiently. And when applying the S-HD type hold-down connector, stud should be reinforced against weakening by drilled hole. As increasing the number of lag screw, the number of bolt and the product allowable strength, the strength of shear wall that using hold-down connector was also increased. When applying hold-down connector to light-framed building using 38 mm stud, it must be reinforced by enlarging the thickness of stud like as 38 mm doubled column.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.70-74
• /
• 1997

LGSF Housing의 설계는 기존의 2*4 목조주택의 설계방법을 그대로 수용하되 박판의 강재를 사용한다는 특성에 따라 부재의 좌굴특성을 고려하는 점에서 큰 차이가 있다고 볼 수 있다. 따라서 부재의 허용내력은 부재의 형상에 따라 그 좌굴모드가 결정되고 각 모드 중 최소의 값이 부재의 최종 허용내력으로 결정된다. 이와 같은 성상을 살펴볼 때 LGSF Housing은 사용되는 자재의 단면형상 개발에 따라 그 내력의 증진을 기대할 수 있으며, 이에 대한 연구의 필요성이 크다고 볼 수 있다. 또한, 스틸하우스는 공장에서 제작된 스터드의 현장조립에 의하여 시공되므로 이들 부재간의 접합방법에 큰 영향을 받게 된다. 기존 외국의 시공사례를 살펴보면 부재간의 접합은 주로 핸드건 등에 의한 스크류를 사용한 접합방법이 이용된다. 따라서, 이러한 접합방법의 내력평가방법도 해결되어야 할 문제점으로 볼 수 있다. 이러한 제반 문제점 등이 해결된다면 LGSF Housing은 건설공기의 단축을 기할 수 있고, 시공의 신속.편리성을 도모할 수 있으며, 자원의 재활용이 가능하고 향후 벽체 패널의 공장생산 등을 통한 공업화 건축이 가능하다는 점 등을 고려할 때 국내 저층구조물의 설계에 새로운 방향을 제시할 수 있을 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.12-18
• /
• 1995

고도(高度)의 엔지니어링 구조물(構造物)로 경제성이 높은 경량(輕量) 목조(木造)트러스에 사용될 수 있는 소나무(Pinus densiflora) 재(材)에 적용한 20게이지 아연도금 강(鋼) 플레이트 접합부(接合部)의 조합하중(組合荷重) 및 모멘트 성능(性能)을 평가하기 위하여 정밀도를 개선(改善)한 편심가력(偏心加力) 장치(裝置)를 창안하여 실험하고 반강절(半剛節) 접합부의 개념(槪念)과 가상(假想)일 법(法)을 적용한 모형을 유도하여 비선형(非線形) 해석(解析)하였다. 반강절(半剛節) 접합부(接合部)의 개념을 도입하여 저자가 유도한 비선형(非線形) 모형으로 조합하중 하에서의 접합부 거동을 해석한 결과, 금속 플레이트 접합부의 모멘트는 Wolfe 모형에 비하여 정확도가 높은 값으로 계산되었는데, 이는 비선형모형에서 접합부의 반강성(半剛性)에 의한 2차적인 모멘트의 영향을 적절히 고려한 때문으로 판단되었다. 본 연구에서 사용한 실험장치는 조합하중에 대한 금속 플레이트 접합부의 성능을 평가하기 위한 표준시험법(標準試驗法)으로 적용될 수 있을 것이며, 비선형(非線形) 해석방법(解析方法)은 조합하중(組合荷重)및 모멘트 성능(性能)을 예측(豫測)하는데 활용될 수 있다.

• Journal of architectural history
• /
• v.29 no.6
• /
• pp.67-77
• /
• 2020

The purpose of this study is to reveal the wood joinery technique in the ancient era. Joinery is one of the core techniques in constructing timber frame architecture in the Korean peninsula. These techniques can be revealed by examining wooden members of ancient buildings. The members were excavated at the Donggung Palace and Wolji Pond, the historic site in Gyeongju. This study collects the data of 284 members excavated at the Donggung Palace and Wolji Pond and analyzes the details such as length, thickness, width, joint types, joint shapes. With the result of the analysis, this study tries to indicate the level of wood joinery techniques in ancient buildings.

• Conservation Science in Museum
• /
• v.27
• /
• pp.125-146
• /
• 2022

The Wooden Gamsil with Inscription of "Botajeon" in the collection of the Dongguk University Museum was made in imitation of the wooden architecture style of the late Joseon period. The Gamsil had suffered exfoliation in the pigment and loss of components and thus underwent conservation treatment. Prior to the conservation treatment, the damage was classified by type and form, scientific analysis was carried out on the fiber and the species of wood, and portable X-ray fluorescence (P-XRF) analysis was conducted for the pigment component analysis. According to the analyses, Korea Pine(Soft pine) was used for most parts of the Gamsil, Manchurian walnut (Jugalns spp.) was used for the signboard, and the fiber used was identified as rice straw (Oryza sativa). The P-XRF identified white lead and zinc oxide in the white pigment, red lead in the red pigment, ultramarine blue in the blue pigment, and emerald green in the green pigment. For the conservation treatment, contaminants attached to the gamsil were removed by both dry and wet cleaning, detached parts were reattached in their original places, and lost parts were restored.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.1
• /
• pp.21-27
• /
• 1995

고도(高度)의 엔지니어링 구조물(構造物)로 경제성이 높은 경골(輕骨) 목조(木造) 트러스에 사용될 수 있는 소나무(Pinus densiflora) 재(材)에 적용한 20게이지 아연도금강(鋼) 플레이트 접합부(接合部)의 하중(荷重)-변위(變位) 특성(特性)을 평가하기 위하여 Foschi 모형을 사용하여 모형 모수(母數)를 산출하고 실험치와 계산치를 비교 분석하였다. 접합부(接合部)의 하중(荷重)-변위(變位) 곡선(曲線)은 비선형 특성을 나타내었다. 접합부의 하중성능 및 강성(剛性)은 플레이트 및 목리에 평행한 형태에서 최대치를 나타내었고, 플레이트에 직각이고 목리(木理)에 평행한 형태로부터 플레이트에 평행이고 목리에 직각인 형태순으로 감소하다 플레이트 및 목리에 직각인 형태에 최소치를 나타내었다. 3-모수(母數) 비선형 모형으로 예측된 스테인레스강(鋼) 및 아연도금강(鋼) 플레이트 접합부의 하중-변위 특성에 대한 계산치는 실험치와 잘 일치하였다.