Browse > Article
http://dx.doi.org/10.5658/WOOD.2013.41.3.211

Withdrawal and Lateral Resistance of Nail Joints Composed of Dimension Lumber and OSB in Light-Frame Wood Construction  

Oh, Sei-Chang (Department of Forest Resources, Daegu University)
Publication Information
Journal of the Korean Wood Science and Technology / v.41, no.3, 2013 , pp. 211-220 More about this Journal
Abstract
The nailed joints in wood construction are commonly designed to resist and carry the lateral load but also subject to withdrawal force like uplift load due to the wind. This research was conducted to evaluate the performance of nailed joint composed of dimension lumber and sheathing materials through the nail withdrawal and unsymmetric double shear joint test, and then compared to current design values. The withdrawal strength was greatly dependant on wood specific gravity, and the withdrawal strength of I-joist with OSB showed higher value in spite of low specific gravity. The maximum withdrawal loads were greater than that of derived current design values about 5 times. The lateral resistance of Japanese larch/OSB nailed joints was higher than that of SPF/OSB nailed joint, and derived allowable lateral strength of nailed joints in this study exceeded the current design values. The failure mode of nailed joints was primarily due to the nail bending and this tendency was notable in SPF/OSB nailed joint.
Keywords
nailed joints; withdrawal strength; lateral resistance; Japanese larch; SPF;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 American Forest and Paper Association. 2005. National design specification for wood construction. ANSI/AF&PA NDS-2005.
2 Celebi, G. and M. Kilic. 2007. Nail and screw withdrawal strength of laminated veneer lumber made up hardwood and softwood layers. Construction and Building Materials 21: 894-900.   DOI   ScienceOn
3 Chow, P., J. D. Mcnatt, S. J. Lambrechts, and G. Z. Gertner. 1988. Direct withdrawal and head pullthrough performance of nails and staples in structural wood-based panel materials. Forest Prod. J. 38(6): 19-25.
4 Forest Products Laboratory. 2010. Wood handbook-Wood as an engineering material. General Technical Report FPL-GTR-190. Madison, WI. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.
5 Meekum U. and Y. Mingmongkol. 2011. Experimenatal design of laminated veneer lumber fiber reinforced composite: Processing parameters and its durability. 16th International Conference on Composite Structures. ICCS 16. FEUP, Porto, 2011.
6 Sinha, Arijit and Rakesh Gupta. 2009. Strain distribution in OSB and GWB in wood-frame shear walls. Journal of Structural Engineering 135(6): 666-675.   DOI   ScienceOn
7 Winistorfer S. and L. Soltis 1994. Lateral and withdrawal strength of nail connections for manufactured housing. Journal of Structural Engineering 120(12): 3577-3594.   DOI   ScienceOn
8 국토교통부. 2009. 건축구조기준 제8장 목구조.
9 서진석, 황성욱, 황권환, 정기영, 정하현. 2012. 오에스비 대체용 국내산 합판의 못 접합부 전단내력성능. 목재공학 40(4): 287-293.
10 오세창. 2000. 국산 $2{\times}4$ 구조재 못 결합부의 인발 및 전단성능. 한국목재공학회 2000 학술발표논문집: 13-18.
11 장상식. 1999. 목재-판재 못 접합부의 압축전단시험. 한국목재공학회 1999 추계학술발표논문집: 79-84.
12 한국표준협회. 2002. KS F 3020 침엽수 구조용재.
13 한국표준협회. 2004. KS F ISO 9087 목재의 못 또는 나사못 뽑기 저항시험방법.
14 한국표준협회. 2005. KS F 2153 목구조 철물접합부의 전단시험방법.
15 황권한, 박문재. 2008. 오에스비에 대한 각종 부재의 못전단성능. 목재공학 36(4): 66-76.   과학기술학회마을   DOI
16 日本木材學會.物理.工學編編輯委員會. 1985. 木材科學實驗書 -工學編. 日本木材學會創立30周年記念事業委員會.