• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.81-89
• /
• 2011

This paper introduces a recently developed thinning-out timber framed earth retaining wall system. Timber framed retaining walls are usually designed by using design code of gravity type retaining wall but internal stability of timber framed earth retaining walls is often neglected. In this study, it is recommended to use the design code for segmental retaining walls by National Concrete Masonry Association (NCMA, 1997) to check internal stability of timber framed earth retaining wall. Based on the several shear test results for 3 types of timber frames, a simple design chart including internal stability is suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.970-970
• /
• 2012

최근 치수의 기능을 수행하면서 원래 자연하천의 모습을 보전 혹은 복원하는 "생태하천 복원 공법"의 필요성이 대두되고 있으나 구체적인 공법에 대한 연구는 미미한 실정이다. 본 연구에서는 하천 내 시설물의 조성 시 유황에 따른 자연 하안 유도와 습지형태의 생물 서식공간 조성 유무를 평가하기 위하여 평창강 일원에 목재 유도틀을 설치하고 이에 따른 지형변화, 저서무척추동물을 포함한 수생생물들의 서식특성을 분석하였다. 평창강 금당계곡 일원을 대상으로 RMA-2 모형의 범용프로그램인 SMS 모형을 통해 수리 특성분석을 실시하였고 안산에 있는 수리모형 실험장에서 기본 수리특성 실험 후 수리적 안정성이 확보된 지점에 목재 유도틀을 2009년 9월에 설치하여 유도틀 설치 전과 설치 후 2010년 10월까지의 지형변화를 분석하였다. 지형의 측량은 광파측정기(니콘 DTM-520)로 하였으며 측량된 자료를 이용하여 Contour Map을 작성하여 지형변화를 분석하였고, 유도틀 설치지역을 중심으로 2010년에 3차에 걸쳐 지형 및 생물상 변화에 대한 정량 및 정성조사를 실시하여 비교분석 하였다. 유도틀 설치 후 2010년 하절기에 집중호우에 의한 유도틀의 파손 및 형태변형 등 문제가 없어 수리적으로 안정한 것으로 판단되었다. 지형 변화의 측면에서는 유도틀 조성 전 사질로 되어있던 단순한 선형의 하안이 유도틀 설치 후 다양한 하상재질 및 형태가 변화했으며 유도틀의 배치에 따라서 굼치 및 둠벙형 습지가 형성되었다. 유도틀 설치지역의 3개지점(상부, 중간배후습지, 하부)에서 저서무척추동물에 대하여 모니터링한 결과, 설치된 유도틀의 중간지점에서 가장 높게 종의 서식이 확인되었으며 상부지점과 하부지점은 상대적으로 낮게 나왔으나 상부지점 보다는 하부지점이 양호하게 나타났다. 조사시기별 개체수의 변화에서는 종수변화와 패턴이 유사하게 나타났으며 깔다구와 꼬마줄날도래등 특정종의 증식이 많았다. 또한, 굼치 및 둠벙형 습지 내에 어류의 치어 및 유어, 양서류, 파충류등 다양한 생물의 서식이 확인되었다. 이는 유도틀에 의해 생성 및 유도된 지형변화가 하천을 기반으로 생활하는 생물들에게 다양한 피난처 및 은신처 역할을 잘 제공하고 있음을 보여준다.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.29-34
• /
• 2012

To examine possibilities to make use of woodceramics for the lower material of hot-floored ondol boards, woodceramics made from sawdust board with Pinus densiflora, put them in a wood frame and concrete block and heated them sending an electric current, and measured changes in surface temperature of a laminated floor board and a plywood floor board. As the sending an electric current to time passed, their surface temperature increased rapidly up to 20 minutes, and then gradually ascended. In terms of the surface temperature in the wood frame, the beginning temperature of a plywood floor board was higher than that of laminated floor one; however, as time passed, a laminated floor board's temperature rose, and after 60 minutes, it showed similar to the temperature of a floor board of lamination. On the other hand, the surface temperature in a concrete block showed that the laminated floor board was higher than the plywood floor board in both early and 60-minute later temperatures. With the lapse of time after switching off, the surface temperature of floor boards slowly dwindled up to 9 minutes, and from that time on, began to drop sharply. In terms of the descent speed of surface temperature, when woodceramics' surface temperature was adjusted at $70^{\circ}C$, the laminated floor board was the highest; when it was at $80^{\circ}C$, the plywood floor board was the highest, resulting in rapid descent speed of heat.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.231-241
• /
• 2009

Trade specialization index, import market share, unit value index, market comparative advantage index have been applied to compare the competitiveness of forest products in Korean and European markets for the case of Korea-EU FTA. The results say that no items of non-timber products would show a surge of imports as a result of FTA. Timber products, however, such as non-coniferous plywood, continuously shaped wood (non-coniferous), densified wood, wood wool and flour, other (plywood), other (particle board, 441039)), other (fiberboard), oriented strand board (other), other (particle board, 441090), other (particle board, 441031), Prefabricated buildings of wood, fibreboard (of a density exceeding $0.5g/cm^3$ but not exceeding $0.8g/cm^3$), wooden frames (for paintings, photographs, mirrors or similar objects) and wood marquetry and inlaid wood are expected to increase of their imports by eliminating tariffs. For Korean exports no items of non-timber products have competitiveness in European market. For Korean pyroligneous liquid, which is the only competitive timber product in EU market in terms of MCA and TSI, it is difficult to decide whether it has competitiveness, since the actual exports have taken place occasionally during a period of last five years.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.260-269
• /
• 2018

The purpose of this study is to interpretate the tools and the method of making wooden artifacts by analyzing the trace of tools on the surface of wooden artifacts estimated to be from the 2nd to the 4th century. As a result of analyzing the trace of tools on the surface of 97 items of wood artifacts, it was confirmed that various tools such as rhizome, chisel, claw, hand knife and ax were used to make these artifacts. Particularly, the marks of the turning knife and the turning lathe were confirmed, and it was found that the method of turning operation was used at this time. In addition, it was confirmed that both the Nunjil (tangential process) and the Seonjil (longitudinal process) were used to produce the wooden container artifacts by turning operation. It observes that proper processing method operation was applied to manufacture wooden container artifact depending on its form and intended use.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).

• Conservation Science in Museum
• /
• v.4
• /
• pp.1-16
• /
• 2003

For the conservation treatment of the Central Asia mural painting which is to be exhibited in the new museum in Yongsan, we analyzed the pigments used in this mural painting and examined to identify the species of the straw in the wall. We also analyzed the species of the wood of the wooden protective frame and the material of the paper in it, in order to review the material and technique of the conservation treatment performed before the mural painting had been brought to the National Museum of Korea in 1916. The results were as follows: the black pigments of Bon4075 and Bon4078 is carbon(C); the white pigment on the background is gypsum[Ca(SO)₄(H₂O)₂]; the red pigment is lead oxide(Pb₃O₄) and hematite(Fe₂O₃) etc. The straw, which had been mixed into the wall to prevent the wall from cracking, was proved to be either wheat straw or oats straw. The wooden protective frame, which protects the mural painting now, was proved to be made of Salix, Populus, Cryptomeria japonica and pine. The paper discovered in the frame was proved to be made of the bark of a mulberry.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.16-22
• /
• 2017

In Korea, performance-based fire safety designs are being discussed to deal with the various risks of fire in complex and diverse types of structure. However, performance-based fire safety designs are not actively employed because it is difficult to estimate the fire characteristics related to the various factors in buildings. In this study, real scale fire tests were conducted based on fire severity levels and fire loads provided in He New Zealand Building Code, in order to use the results as guidelines and fundamental data for performance-based designs. In the real scale fire tests conducted in a 10MW full-scale calorimeter, wood cribs were placed in a $2.4(L){\times}3.6(W){\times}2.4(H)m$ mock-up of a compartment which had one $0.8(L){\times}2.0(H)$ opening for different fire loads and heating was continued until all of the wood cribs were burned down. The heat release rate started to increase rapidly 90 seconds after the wood cribs caught fire. In the test with a fire load level 1, the maximum heat release rate of 4743.4 kW was reached at 244 second. In the test with fire load level 2, a maximum heat release rate of 5050.9 kW was reached at 497 second. In the test with fire load level 3, a maximum heat release rate of 4446.9 kW was reached at 677 second.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.147-161
• /
• 2022

This study examined changes in the ecological characteristics and design characteristics of Ban's exhibition space in three representative temporary exhibition halls and three permanent exhibition halls designed by Ban Shigeru since 2000. Through the investigation of the concepts and characteristics of ecological architecture, the design characteristics of exhibition space, the analysis framework of the design characteristics of exhibition space and the design elements of ecological architecture is obtained. The analysis results show that there are big changes between the temporary exhibition space and the permanent exhibition space in terms of building scale, space composition, function, materials and technology. On the one hand, the temporary exhibition space used recyclable materials, such as paper tubes, containers to be assembled on site into a single-layer space focused on display. The assembly method was simple and the construction period was short. After the exhibition, the exhibition space were dismantled. The materials were either transported to the next display site or recycled and reused. On the other hand, the permanent exhibition space used reinforced concrete as the main structure, and used a large amount of wood and glass materials to construct a multi-layered composite cultural space that separated the exhibition space and the leisure space. In terms of ecological characteristics, the building materials of the temporary exhibition space were recycled and no industrial wastes were generated after the demolition. The permanent exhibition hall uses eco-friendly wood for the roof and walls, so it is easy to replace and repair. Both types of exhibition halls are changing ecological architecture in a more sustainable direction by saving resources and energy through natural light and ventilation.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.