• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1138-1149
• /
• 1993

A new mode synthesis method using Lagrange multipliers and substructure hybrid interface modes is presented. Substruture governing equations of motion are derived using Lagrange equations and the constraints of geometric compatibility between the substructures are treated with Lagrange multipliers. Fixed, free, and loaded interface modes can be employed for the modal bases of each substructure. In cases of the fixed and loaded interface modes, two successive modal transformation relations are used. Compared with the conventional mode synthesis methods, the suggested method does not construct the equations of motion of the coupled structure and the final characteristic equation becomes a polynomial. Only modal parameters of each substructure and geometric compatibility conditions are needed. The suggested method is applied to a simple lumped mass model and parametric study is performed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.847-854
• /
• 1999

In this paper, we have analysed frequency-dispersion characteristics of higher-order modes for uniform planar transmission lines, using the 2-dimensional finite-difference time-domain method. The method presented in this paper uses both informations of amplitude and phase of the electromagnetic spectrum to determine resonant frequencies, while methods previously reported use the magnitude only. This algorithm is very useful when a resonant mode has a relatively small magnitude, where the identification of the resonant mode is quite difficult. Numerical results show that a strip line supports few higher-order modes within the frequency range of 20 GHz, but there occur many higher-order modes in the structure of grounded coplanar waveguide, where resonant frequencies of the first higher-order mode is very close to those of the fundamental mode and there occur lots of very adjacent higher-order modes. As in this example, for the analysis of planar transmission lines which support many resonant modes very close each other, the method presented in this paper can be applied very efficiently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1435-1444
• /
• 2008

In this paper, we designed a reduced height waveguide(WG) to microstrip mode converter with a short transition length. The mode converter is composed of a mode converter using E-plane probe and a modified impedance transformer. The mode converter was designed using a probe shorted to top of a 50 ohm ridge WG. The modified impedance transformer was designed to connect the mode converter to the reduced height WG. For wide bandwidth operation, the coupling of the two parts was tuned. The structure of the mode converter was optimized for low loss and wide bandwidth, and the optimized mode converter was fabricated. The performance of the mode converter was extracted using the thru and line S-parameters for back-to-back connections, and the connector loss was calibrated. The mode converter has a right angle structure and short transition length, 7.2 mm. The mode converter shows excellent performances; the insertion loss of 0.12 dB at 15 GHz, and the return loss above 10 dB for the full Ku-band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.655-662
• /
• 2003

A rigorous field analysis by the non-decaying mode and the contour graph method is presented for dielectric-rod loaded cylindrical cavity resonators. Resonant frequencies and the lowest order modes for this resonator are calculated. The mode charts are presented to design the resonators. TE mode(transverse electric or H mode, having no Ez), TM mode(transverse magnetic or I mode, having no ㎐) and HEM mode(hybrid electromagnetic mode, having non-zero Ez and ㎐) are analyzed in detail using non-decaying mode method. The mode charts are completed. The validity of the theory is confirmed by experiments. The results were on the whole satisfactory. Experimental measurements show excellent agrement with the numerical results. The average error of TE, TM, and HEM mode is about 0.20 %, 0.14 %, and 0.28 %, respectively.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.350-353
• /
• 2020

The validity of the calculation method based on the local mode in hydrogen-bonded water molecules was investigated by comparing the frequencies of the local and normal modes of OH stretching vibration in water molecules. By calculating a monomer, dimer, and trimer of water molecules using a quantum chemical ab initio theory, we examined how the frequencies of the local and normal modes and the anharmonicity of local modes vary with molecular cluster size. It was shown that, as the number of molecules increases from monomer to trimer, the anharmonicity of OH bonds increases and the difference between local and normal mode frequencies decreases. This confirms that local-mode-based calculations that can easily handle the anharmonicity can be appropriate for the calculation of the OH stretching frequency of water molecules in the condensed phase.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.25-30
• /
• 1998

In this paper, a simple scheme of optical interconnections between M input and N output terminals using mode speckle patterns generated in the mulitmode optical fiber is described. It is shown that fully parallel nonblocking interconnections are accomplished by using properly generated mode speckle patterns as destination codes and dectecting the generated mode speckle patterns separately using M multiplexed Vander Lugt matched filters at each output terminal. The orthogonality condition of mode speckle patterns is investigated by either changing the launching angles or rotating the polarization direction of the beam. Preliminary experiments by use of a 4$\times$4 graded refractive-index multimode fiber coupler whose core diameter was 50 ${\mu}{\textrm}{m}$ were performed to show the feasibility of our scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.40-47
• /
• 2016

In this paper, a dual mode buck converter with an ability to change mode is proposed, which is suitable particularly for portable device. The problem of conventional mode control circuit is affected by load variation condition such as suddenly or slowly. To resolve this problem, the mode control was designed with slow clock method. Also, when change from the PFM(Pulse Frequency Modulation) mode to the PWM(Pulse Width Modulation) mode, to use the counter to detect a high load. And the user can select mode transition point in load range from 20mA to 90mA by 3 bit digital signal. The circuits are implemented by using BCDMOS 0.18um 2-polt 3-metal process. Measurement environment are input voltage 3.7V, output voltage 1.2V and load current range from 10uA to 500mA. And measurement result show that the peak efficiency is 86% and ripple voltage is less 32mV.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.209-210
• /
• 2016

날이 갈수록 빨라지는 IT분야의 발달로 최근 정보 통신망, 핸드폰, 컴퓨터 등의 발달과 함께 시간과 장소에 상관없이 빠르게 동영상 수요가 급증 하고 있다. 급증하고 있는 동영상 수요에 맞춰 고품질의 서비스를 제공하기 위해서는 압축 부호화 기술이 필수적이다. 이와 같은 흐름에 따라 표준화 기관인 ITU-T, ISO/IEC는 2013년 초, 최신 압축 부호화 기술인 HEVC를 제정하였다. HEVC에서는 이전 표준과 비교하여 다양한 부호화 기술이 포함되었는데 그 중 화면 내 예측 기술에서는 35가지 모드 중에서 최적의 모드를 결정하여 예측 블록을 더욱 정밀하게 생성한다. 이때, 색차 성분의 화면 내 예측 모드는 휘도 성분의 예측 모드와는 달리, 고정된 5개의 모드만 가지고 있다. 본 논문에서는 5개 모드의 번호를 통계적 특성을 이용하여 새롭게 모드 번호를 할당하는 실험을 수행하고 결과를 분석한 후, 향후 연구 방향을 제시한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.117-120
• /
• 2006

최근 표준이 완료된 H.264/AVC는 기존의 비디오 압축 표준과 비교하여 높은 압축 성능을 보이지만 부호기에서 사용되는 Rate-Distorion Optimization(RDO) 기술은 모든 매크로블록 모드에 대해 부호화 과정을 수행 후 최적의 매크로블록 모드를 결정하기 때문에 부호기의 복잡도를 상당히 증가시킨다. 본 논문에서는 부호화할 블록 내의 가로와 세로 방향의 화소 유사성 정보를 이용하는 H.264/AVC의 화면 내(Intra) 예측을 위한 새로운 고속 모드 결정 방법을 제안한다. RDO를 통해 최적의 모드로 결정된 화면 내 예측 모드의 블록 내 가로와 세로 방향의 화소 유사성을 분석해 본 결과, 예측 모드에 따라서 그 유사성이 뚜렷한 차이를 보이는 것으로 나타났다. 따라서 제안하는 방법은 화소 유사성 정보를 이용하여 후보 블록 모드의 수를 줄임으로서 PSNR(peak signal-to-noise ratio)의 감소가 거의 없이 화면 내 부호화 시간을 평균 약 70% 가까이 줄일 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.113-116
• /
• 2005

본 논문은 DOCSIS(Data Over Cable Service Interface Specifications)를 기반으로 하는 디지털 CATV(Cable TV)의 케이블 모뎀에서 적용이 가능한 이중모드 등화기의 모의실험 결과에 관한내용이다. 케이블 모뎀의 등화기는 훈련심벌이 없으므로 수신된 심벌을 가지고 채널을 보상하며 처음에는 블라인드 모드로 동작하다가 특정한 임계값보다 작을 경우 결정 지향 모드로 동작하는 이중모드구조를 가진다. 본 논문에서 AWGN과 rummler 채널을 사용하였으며, 64QAM과 256QAM에 대해 rummler 채널의 반사파 이득을 변화해 가면서 케이블 모뎀의 BER(Bit Error Rate)를 모의실험하였다. 또한 이중모드 등화기의 탭 수를 변화해 가면서 케이블 모뎀의 BER을 조사하였으며 fractionally spaced 이중모드 등화기와 symbol spaced 이중모드 등화기의 BER을 조사하였으며 FBF(Feedback Filter)의 유무에 따른 BER도 조사하였다.