• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.395-396
• /
• 2010

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.668-669
• /
• 2016

The retarder as a hydraulic brake system in order to assist a service brakes in commercial vehicle is operated by automatic and manual mode due to driver. Braking energy by retarder operation is transmitted to the engine radiator of vehicle cooling system, passing through the retarder oil heat exchanger. At this moment, the retarder ECU performs the function that is controlled a braking torque with consideration for automatic and manual mode, temperature of retarder oil/water, engine coolant temperature, vehicle speed, and etc. In this paper, it deals with the design of retarder control logic and the results of retarder braking performance test regarding a cooling system of retarder and vehicle.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.189-192
• /
• 2021

three degree of freedom (3DoF), three degree of freedom plus (3DoF+), six degree of freedom(6DoF) 등 몰입형 비디오의 높은 몰입감을 제공하기 위해 다중 비디오 영상을 효율적으로 처리하는 기법이 활발히 연구되고 있다. 이를 위해 원본의 몰입형 비디오가 입력되면 기본 시점 영상과 추가 시점 영상에서의 중복을 제거하고 기본 시점(basic view)에서는 보이지 않지만 추가 시점(additional view)에서는 보이는 영역을 추출하는 프루닝 과정이 이뤄지는 부호기에서의 부호화 모드 결정은 매우 중요하다. 본 논문은 test model for immersive video (TMIV)의 모드 중 하나인 MPEG immersive video (MIV) view mode 를 통해 만들어진 프루닝 (pruning) 그래프에서 선택된 시점들을 활용하여 뷰 간 중복성을 제거할 수 있는 효율적인 부호화 구조로 클러스터를 기반으로 병렬적으로 부호화하는 클러스터 기반 정렬 기법을 제안한다. 선택된 시점들을 인덱스 순서에 따라 부호화하는 기존 방법에 비해 제안하는 방법은 peak signal-to-noise ratio (Y-PSNR)에서 평균 3.9%의 BD-rate 절감을 보여주었다. 본 연구는 또한 더 객관적인 품질 측정을 위해 immersive video peak signal-to-noise ratio (IV-PSNR)에 의한 비교 결과도 함께 제공하며, 참조 순서에 맞게 정렬한 프루닝 기반 정렬 기법과의 비교도 함께 제공한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2009

In this paper, a low-cost hybrid-integrated tunable laser is realized using a polymer-ring resonator-based add/drop filter reflector and a reflective semiconductor optical amplifier. The add/drop filter reflector, composed of a double-ring resonator with different radii, can have characteristics of selective wavelength reflection and wide wavelength tuning with an aid of vernier effect derived from the radii difference. By hybrid-integrating the reflective semiconductor optical amplifier with the add/drop filter reflector, a tunable laser can be realized through an active alignment method. The hybrid laser exhibited a single mode lasing with side mode suppression ratio of 26 dB and full width half maximum of 0.03 nm. In addition, applying a low current as small as 25 mA onto electrodes over add/drop filter reflector, a wavelength tuning range of 17 nm could be obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2012

The linear and decision-feedback equalization can mitigate time-varying intersymbol interference (ISI) caused by time-varying multipath propagation for underwater acoustic channels. The perfect elimination of interference components, however, is difficult using the linear equalization and the decision feedback equalizer has an error propagation problem. To overcome these shortcomings, this paper proposes an equalizer mode selection method using training sequences. The proposed method selects an equalization mode corresponding to the signal-to-noise ratio (SNR). If the SNR is low, the proposed system operates the linear equalizer for preventing the error propagation and if the SNR is high, the decision feedback equalizer for eliminating the residual ISI. Therefore, the proposed method can improve the error performance compared to the conventional equalizers. The computer simulation shows the proposed method improves the bit error performance using practical underwater channels responses acquired from the sea experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.254-262
• /
• 1996

In this paper, we present a polarizer that consists of three step rotary detents which can selectively convert linear polarzation into circular polarization and vice versa. For the design of the polarizer, the transmission line theory is applied to design the wa- veguide mode transducer for the modes to be smothly converted in waveguides, and a dielectric plate is inserted in circular waveguide for the conversion of a polarized wave with the angle of an inserted dielectric plate. Also, we simulated to obtain the optimum values of the transmission and the reflection coefficient characteristics at input and output port, and proved the propriety of the theory from the knowledge of measuring the constructed polarizer with the designed data.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.184-188
• /
• 2003

We fabricated a P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$waveguide phase modulator with significant phase shift for the TE mode but negligible for the TM mode. We selected the P-I-i-I-N structure to cause a phase shift about the TM mode. The wavelength of $\lambda=1.55$\mu\textrm{m}$ was measured for both the TE and TM modes, respectively. As a result, the measured phase shift efficiency ($\Delta\phi$) by using the Fabry-Perot resonance method was $7.9^{\circ}/V.mm$ for TE-polarized light. Also, no modulation was observed for TM-polarized light.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.311-318
• /
• 1994

We fabricated fiber-optic polarizers utilizing polarization selective mode coupling between the guided mode of a fiber and the surface plasmon mode supported by a thin aluminium film deposited on the polished side of a fiber. AI thin films with various thicknesses were coated onto the 633 nm, 830 nm, 1.3 fJITI single mode fibers. The maximum extinction ratio was higher than 30 dB for most of the samples and the best result was 42 dB at 90 A film thickness, with 1.3 fJITI single mode fiber. The insertion loss ranged from 0.2 dB to 1.5 dB.1.5 dB.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.154-155
• /
• 2003

반도체 소자에 있어서 굴절율의 변화는 중요한 역할을 한다. 굴절율을 변화시키는 다양한 요소들은, 전계에 의한 1차 전기광학(linear electro-optic： LEO) 효과와 2차 전기광학 (quadratic electro-optic： QEO) 효과, 자유 운반자에 의한 밴드천이(band-gap shift： BS) 효과와 플라즈마(plasma： PL) 효과 등으로 잘 알려져 있다. 본 논문에서는, 오로지 TE 모드에 대해서만 선택적으로 위상 변화를 주는 P-I-i-I-N GaAs／Al／sub0.35／Ga／sub 0.65／As 도파로 위상변조기를 보고한다. (중략)