• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.548-555
• /
• 2022

This paper describes the hardware implementation of elliptic curve cryptography (ECC) used as a core operation in elliptic curve digital signature algorithm (ECDSA). The ECC processor supports eight operation modes (four point operations, four modular operations) on the NIST P-521 curve. In order to minimize computation complexity required for point scalar multiplication (PSM), the radix-4 Booth encoding scheme and modified Jacobian coordinate system were adopted, which was based on the complexity analysis for five PSM algorithms and four different coordinate systems. Modular multiplication was implemented using a modified 3-Way Toom-Cook multiplication and a modified fast reduction algorithm. The ECC processor was implemented on xczu7ev FPGA device to verify hardware operation. Hardware resources of 101,921 LUTs, 18,357 flip-flops and 101 DSP blocks were used, and it was evaluated that about 370 PSM operations per second were achieved at a maximum operation clock frequency of 45 MHz.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.141-144
• /
• 2008

Atomization characteristics and spatial distribution of the spray emanating from an injector of liquid-propellant thruster are investigated by using dual-mode phase Doppler anemometry (DPDA). Spray characteristic parameters such as the mean velocity, Sauter mean diameter (SMD), and velocity fluctuation are measured at various locations along the spray axis as well as on the radial direction. Those data are quantified in radial profile and also used to scrutinize the correlation between diameter and turbulence intensity of spray droplets. For the better visual grasp, dynamic behavior of spray droplets along the spray stream is presented through the velocity vectors projected on the plane of geometric axis of nozzle orifice and radial coordinate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.82-87
• /
• 2002

The attitude determination in LEO Satellite like KOMPSAT is one of the most important issues for Sun-Acquisition. Particularly, in KOMPSAT, the roll axis direction can be determined since the sun sensor gives the information on the Euler angle for pitch and yaw axes in Sun-Acquisition mode. In other words, it is the problem to determine the two unknown axes direction with one axis knowledge. This paper proposes a new effective method for attitude determination of general LEO satellites when one axis information is avilable and proves its usefulness throughout the simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.396-404
• /
• 2011

This paper proposes a performance improvement of a grid-connected wind turbine using sliding-mode based direct power control under an unbalanced grid fault. The proposed control method has some advantages for grid connected control. At first, it doesn't need the synchronous phase angle of the grid voltage. It has also fast dynamic characteristics compared with a conventional current controller. In addition, it is suitable for an unbalance compensation control. The effectiveness and robustness of the proposed algorithm are verified by simulations and experiments.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.128-133
• /
• 2015

This paper describes the construction of a static 3D ultrasonography image by tracking the radiation beam position during the handy operation of a 1D array probe to enable point-of-care use. The theoretical model of the transformation from the translational and rotational information of the sensor mounted on the probe to the reference Cartesian coordinate system was given. The signal amplification and serial communication interface module was made using a commercially available sensor. A test phantom was also made using silicone putty in a donut shape. During the movement of the hand-held probe, B-mode movie and sensor signals were recorded. B-mode images were periodically selected from the movie, and the gray levels of the pixels for each image were converted to the gray levels of 3D voxels. 3D and 2D images of arbitrary cross-section of the B-mode type were also constructed from the voxel data, and agreed well with the shape of the test phantom.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.46-52
• /
• 2018

A simple Crocco's $n-{\tau}$ time delay model and linear analysis of fluid flow coupled with acoustics are combined to investigate the high frequency combustion instability in the combustion chamber of LOX/hydrocarbon engines. The partial differential equation of the velocity potential is separated into ordinary differential equations, and eigenvalues that correspond to tangential resonance modes in the cylindrical chamber are determined. A general solution is obtained by solving the differential equation in the axial direction, and boundary conditions at the injector face and nozzle entrance are applied in order to calculate the chamber admittance. Frequency analysis of the transfer function is used to evaluate the stability of system. Stability margin is determined from the system gain and phase angle for the desired frequency range of 1T mode. The chamber model with variable baffle length and configurations are also considered in order to enhance the 1T mode stability of the combustion chamber.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.65-72
• /
• 2001

직사각형 평판이 수직방향으로 조화가진력을 받을 때 그 변위가 큰 경우 두 개의 모드 간의 비선형적 상호작용에 대한 연구이다. 폰 칼만 운동방정식에서 유도된 두 개의 상미분 방정식으로부터 수차에 걸친 좌표변환을 거쳐 자유진동의 경우 정지해와 주기해를 구한다. 말굽형태의 분기 현상이 일어날 수 있는 조건을 호모클리닉 또는 헤테로클리닉 궤적의 유무로부터 결정한다. 혼돈 현상의 발생조건을 구하기 위해 멜니코프 방법이 적용되어질 수 있는 형태로 변환하여 광역섭동법의 수학적 결과를 직접적으로 적용할 수 있는 형태로 변환한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.670-672
• /
• 2000

본 논문에서는 단일광자방출 전산화단층촬영영상 (SPECT)을 이용하여 좌심실의 내.외벽의 운동을 분리하여 추적하는 방법을 제시한다. 좌심실의 운동은 크게 평행이동, 회전이동, 비강체 변형으로 나뉘어 분석된다. 운동 추적을 위해 사용된 역동적 변형 솔리드는 물체중심 변동 좌표계로써 특징점들의 모드형태벡터를 사용하고, 좌심실 역동성을 유한요소방법에 의해 시뮬레이션한다. 또한, 변형 모델에 대해 묵시적으로 표준화된 parameterization을 하지 않고, 의료영상으로부터 얻은 자료값을 직접 이용하기 위해 노드간 보간함수로써 3차원 가우시안 함수를 사용한다. 그리하여 보다 자연스러운 방식으로 연속적으로 변화하는 좌심실의 운동을 추적할 수 있다. 이러한 분리된 내.외벽 운동 분석은 운동 기능에 이상이 있는 심질환 분석을 보다 효과적으로 도울 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.838-843
• /
• 2001

Internal damping plays an important role in some rotor dynamic systems with the use of various materials for shafts, for example, composite material. However, although the effects of internal damping have been investigated for a couple of decades, there are several different internal damping models in use, none of which are accepted as the most reliable model. The purpose of this paper is to compare the results of dynamic analysis of rotor systems with several different internal damping models. The exact dynamic element method is used to formulate and analyze the problem. The simulation results provided in this paper may be useful for the dynamic analysis of high rotor systems subject to significant internal damping.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.28-35
• /
• 2007

Airbone laser altimeters have been utilized for 3D topographic mapping of the earth, moon, and planets with high resolution and accuracy, which is a rapidly growing remote sensing technique that measures the round-trip time emitted laser pulse to determine the topography. The traveling time from the laser scanner to the Earth's surface and back is directly related to the distance of the sensor to the ground. When there are several objects within the travel path of the laser pulse, the reflected laser pluses are distorted by surface variation within the footprint, generating multiple echoes because each target transforms the emitted pulse. The shapes of the received waveforms also contain important information about surface roughness, slope and reflectivity. Waveform processing algorithms parameterize and model the return signal resulting from the interaction of the transmitted laser pulse with the surface. Each of the multiple targets within the footprint can be identified. Assuming each response is gaussian, returns are modeled as a mixture gaussian distribution. Then, the parameters of the model are estimated by LMS Method or EM algorithm However, each response actually shows the skewness in the right side with the slowly decaying tail. For the application to require more accurate analysis, the tail information is to be quantified by an approach to decompose the tail. One method to handle with this problem is proposed in this study.