• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2015

The PMV regression analysis was conducted for this model based on a database of the PMV variables. PMV regression model simplification was completed through sensitivity and data analysis. The simplified PMV regression model's and Fanger PMV model was confirmed through MAE and RMSE. And the EMS in EnergyPlus was used to establish a simplified PMV regression analysis-based thermal comfort control. Also, the thermal comfort controls based on simplified PMV model and the Fanger PMV model were applied to the building model, it was confirmed that both controls met the thermal comfort range in more than 90% of cases during the air conditioning period.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.252-257
• /
• 1995

전자기력을 이용한 능동 진동제어는 1979년 Ellis 및 Mote가 원형 톱의 횡 진동의 감쇠에 관한 연구를 수행하였고, 1990년 Hong Su 및 T.S.Sankar등은 시스템의 절대 위치, 절대 속도 및 상대 위치 등의 제어 변수에 대하여 전자기 액튜에이터의 동적 특성이 진동 절연 성능에 미치는 영향에 관한 연구를 하였다. 본 연구는 상부질량과 하부질량이 스프링으로 연결된 2자유도 모델의 능동 진동제어에 대하여 이론해석과 실험해석을 수행하고 각각의 결과를 비교하였다. 실험모델은 직선운동 가이드에 설치된 2개의 질량과 하나의 전자기 액튜에이터를 이용하였다. 진동제어 방법으로서는 모우드 해석에 의한 제어, 스카이 훅 감쇠 제어, Viscous damping 제어 방법을 적용하였다. 본 연구의 목적은 이론해석 결과와 실험 결과를 비교하고 비슷한 제어효과에 대해서 에너지 소비가 작은 효율적인 제어방법을 찾는데 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.208-217
• /
• 1998

본 연구에서는 ER 브레이크와 ER클러치를 피드백작동기로 사용하여 이송테이블의 위치 추적제어를 수행하였다. 이를 위해 먼저 아라빅 검(arabic gum)계통의 ER유체를 자체조성한 후 전기장에 대한 빙햄(Bingham)모델을 실험적으로 도출하였다. 빙햄모델에 근거하여 평판형의 ER브레이크와 실린더형의 ER클러치를 설계 제작하였으며, 계단입력(step input)전기장에 따른 출력토오크특성을 통하여 이들 작동기의 동적모델을 얻었다. 이들 작동기와 연계된 이송테이블시스템의 운동지배방정식을 유도한 후 위치추적제어를 위한 슬라이딩모드제어기를 설계하였다. 제어기 설계시 이송해이블의 부하질량 변화에 대한 시스템 불확실성과 마찰력을 고려하여 제어성능의 강건성을 보장하도록 하였다. 제안된 제어시스템의 제어영역(control bandwidth)을 주파수 영역에서 고찰한 후 여러 레적에 대한 위치추적제어 실험을 수행하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.63-70
• /
• 2010

We are able to find many materials of pendulum dynamic/analysis using linearized model. Usually, analysis of pendulum is to calculate for velocity, period and angle by linearized model on Newton's law. In this paper, analyzed periodical movement of pendulum using nonlinear load model. That is, analyzed load value according to location of moving pendulum at real time. And for the shake of maneuver for pendulum's location, found load control value and compared result of linearized mode with nonlinear model. The result makes know that it is possibility of nonlinear load control model to apply to various model of movement object including flight object, pendulum and etc.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.1-10
• /
• 2007

In this paper, we proposed development of improved model reduction and design of common controller using reduction model. The Algorithm of improved model reduction considered the transient response and the steady-state response in response curve. The generalized controller is designed not only to ensure specified phase margin and iso-damping property also optimized smith-predictor controller about real model using reduction model. Simulation examples are given to show the better performance of the proposed method than convention methods.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.459-464
• /
• 2008

In this paper, we present the model-based fuzzy controller for container cranes which effectively performs set-point tracking control of trolley and anti-swaying control under system parameter and disturbance changes. The first part of this paper focuses on the development of Takagi-Sugeno (T-S) fuzzy modeling in a nonlinear container crane system. Parameters of the membership functions are adjusted by a RCGA to have same dynamic characteristics with nonlinear model of a container crane. In the second part, we present a design methodology of the model-based fuzzy controller. Sub-controllers are designed using LQ control theory for each subsystem in fuzzy model and then the proposed controller is performed with the combination of these sub-controllers by fuzzy IF-THEN rules. In the results of simulation, the fuzzy model showed almost similar dynamic characteristics compared to the outputs of the nonlinear container crane model. Also, the model-based fuzzy controller showed not only the fast settling time for the change in parameter and disturbance, but also stable and robust control performances without any steady-state error.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.301-307
• /
• 2004

This paper suggests a fuzzy variable structure control scheme for Takagi-Sugeno(T-S) fuzzy model and presents the attitude control of the wheel-driven inverted pendulum(WDIP) based on the proposed control algorithm. The proposed controller is designed based on the T-S fuzzy modeling of nonlinear system and the unification of gain matrices in linear subsystems that constitute the overall fuzzy model. The uncertainties generated in the gain matrix unifying procedure can be interpreted as the input disturbances of the conventional variable structure control. These unifying disturbances can be resolved by using the robustness property of the conventional variable structure system. Design example for wheel-driven inverted pendulum demonstrates the utility and validity of the proposed control scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1394-1401
• /
• 2007

Secure access control is a hot issue of large-scale organizations or information systems, because they have numerous users and information objects. In many cases, system developers should implement an access control module as a part of application. This way induces difficult modification of the module and repeated implementation for new applications. In this paper we implement a Java API library for access control to support system developers who use Java. They can easily build up access control module using our library. Our library supports typical access control models, and it can offer new types of access control. Furthermore, it is able to run multiple access control models at the same time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1055-1062
• /
• 2012

In this paper, the mathematical models and control algorithm of a thrust control valve were described as a precedent study on the design of thrust control algorithm for a liquid rocket engine (LRE). Numerical simulations were performed using a simplified simulation system of an LRE and the developed mathematical models were validated by comparison with the experimental results. Through these research, basic data were acquired for the development of a thrust control algorithm for a LRE.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.109-115
• /
• 2008

This paper proposes an adaptive Dynamic Matrix Control (DMC) and its application to boiler-turbine system In a conventional DMC, object system is described as a Step Response Model (SRM). However, a nonlinear system is not effectively described as a single SRM. In this paper, nine SRMs at various operating points are prepared. On-line interpolation is performed at every sampling step to find the suitable SRM. Therefore, the proposed adaptive DMC can consider the nonlinearity of boiler-turbine system. The simulation results show satisfactory results with a wide range operation of the boiler-turbine system.