• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.33-43
• /
• 2005

This paper describes a new approach to minimize the amount of shrinkage cracking in cement treated base(CTB). CTB is a stiffness base having lots of merits such as higher rutting resistance, minimizing fatigue cracking, and the ability to distribute upper loads. However, It is not applied to asphalt pavement system in Korea because of possible cracks caused by dry shrinkage. The goal of this study is the development of cement treated base with lower shrinkage for preventing reflection cracks and rutting. After identifying factors affecting dry shrinkage and analyzing mechanism of each admixture, the laboratory and field tests were designed and performed. Through the preliminary tests, the mix design containing 25 percent o( fly ash and 7 percent of cement was suggested. This mix design was satisfied with strength for Korea specification standard. According to the results considering strength, shrinkage, and economical efficiency, two mix designs were selected; 1) containing 25 percent of fly ash and 2) containing 25 percent of fly ash with 10 percent of expensive additive. For field test based on the result of laboratory test, the optimized alternative in cement treated base with lower shrinkage was the mix design containing 25 percent of fly ash with 10 percent of expansive additive.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.605-615
• /
• 2016

It is difficult to form a rational strut-tie model that represents a true load transfer mechanism of structural concrete with disturbed stressed region(s). To overcome the difficulty and handle numerous load cases with just one strut-tie model, a two-dimensional grid strut-tie model method was proposed previously. However, the validity of the method was not fully examined, although the incorporated basic concepts and new methods regarding the effective strength of concrete strut, load carrying capacity of struts and ties, and geometrical compatibility of grid strut-tie model were explained in detail. In this study, for accurate strength analysis and reliable design of reinforced concrete deep beams, the appropriateness of the two-dimensional grid strut-tie model method is verified. For this, the failure strength of 237 reinforced concrete deep beams, tested to shear failure, is predicted by the two-dimensional grid strut-tie model method, and the results are compared with those obtained by the sectional shear design methods and conventional strut-tie model methods of current design codes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.481-488
• /
• 2013

Nitric oxide ($NO_x$) formation characteristics in non-premixed diffusion flames of methane fuels have been investigated experimentally and numerically by adding 10% ammonia to the fuel stream, according to the variation of the oxygen ratio in the oxidizer with oxygen/carbon dioxide and oxygen/nitrogen mixtures. In an experiment of coflow jet flames, in the case of an oxidizer with oxygen/carbon dioxide, the $NO_x$ emission increased slightly as the oxygen ratio increased. On the other hand, in case of an oxygen/nitrogen oxidizer, the $NO_x$ emission was the maximum at an oxygen ratio of 0.7, and it exhibited non-monotonic behavior according to the oxygen ratio. Consequently, the $NO_x$ emission in the condition of oxyfuel combustion was overestimated as compared to that in the condition of conventional air combustion. To elucidate the characteristics of $NO_x$ formation for various oxidizer compositions, 1D and 2D numerical simulations have been conducted by adopting one kinetic mechanism. The result of 2D simulation for an oxidizer with oxygen/nitrogen well predicted the trend of experimentally measured $NO_x$ emissions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.220-225
• /
• 2014

Generally, the nonlinearity of ultrasonic waves is measured using a nonlinear parameter ${\beta}$, which is defined as the ratio of the second harmonic's magnitude to the power of the fundamental frequency component after the ultrasonic wave propagates through a material. Nonlinear parameter ${\beta}$ is recognized as an effective parameter for evaluating material degradation. In this paper, we evaluated the nonlinear parameter of Al6061-T6 which had been subjected to an artificial aging heat treatment. The measurement was using the transmitted signal obtained from contact-type transducers. After the ultrasonic test, a micro Vickers hardness test was conducted. From the result of the ultrasonic nonlinear parameter, the microstructural changes resulting from the heat treatment were estimated and the hardness test proved that these estimates were reasonable. Experimental results showed a correlation between the ultrasonic nonlinear parameter and microstructural changes produced by precipitation behavior in the material. These results suggest that the evaluation of mechanical properties using ultrasonic nonlinear parameter ${\beta}$ can be used to monitor variations in the mechanical hardness of aluminum alloys in response to an artificial aging heat-treatment.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.113-120
• /
• 2011

BCL-2 family essential proteins to play a pivotal role to perform in apoptosis signaling pathways and essential proteins for the regulation of cell death. BCL2L10 protein is a member of BCL-2 family and it regulates both anti-apoptotic and pro-apoptotic function of specific tissue or cell line. BCL2L10 of function and expression is not reported in ovary cell lines. In this study we reported that BCL2L10 were significant expression of KGN cell line. Ectopic expression of BCL2L10 induced cell death, and its cells killing effect was blocked by pan-caspase inhibitor of the Z-VAD-fmk. Ectopic expression of BCL2L10 protein led to the activation of caspase 9 and caspase 3, suggesting apoptotic cell death, and confocal microscopic analyses showed that BCL2L10 was partially localized in mitochondria. Thus, we provide a novel function of BCL2L10 in KGN cells, which was involved in the intrinsic cell death pathway.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.293-308
• /
• 2012

The shear behavior at the particle/surface interface such as rock joint can determine the mechanical behavior of whole structure. Therefore, a fundamental understanding of the mechanisms governing its behavior and accurately estimation of the interface strength is essential. In this paper, PFC, a numerical analysis program of discrete element method was used to investigate the effects of the surface roughness on interface strength. The surface roughness was characterized by smooth, intermediate, and rough surface, respectively. In order to investigate the effects of particle shape and crushing on particle/surface interface behavior, one ball, clump, and cluster models were created and their results were compared. The shape of particle was characterized by circle, triangle, square, and rectangle, respectively. The results showed that as the surface roughness increases, interface strength and friction angle increase and the void ratio increases. The one ball model with smooth surface shows lower interface strength and friction angle than the clump model with irregular surface. In addition, a cluster model has less interface strength and friction angle than the clump model. The failure envelope of the cluster model shows non-linear characteristic. From these findings, it is verified that the surface roughness and particle shape effect on the particle/surface interface shear behavior.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.663-672
• /
• 2009

In this studies, the adsorption test using Chlorella pyrenoidosa was conducted to examine the effect of Pb adsorption according to various immobilized methods such as Ca-alginate, K-carrageenan, and Polyacrylamide. From the results, the duration to need to reach adsorption equilibrium was delayed according to the immobilization. And, the higher adsorption capacity of immobilized Chlorella pyrenoidosa was represented in the higher concentration of Pb, the smaller amount of immobilizing agent, and the higher pH of solution. The maximum adsorption capacity of Pb was shown in the adsorption test using Chlorella pyrenoidosa immobilized with Ca-alginate even though it was sensitive pH. The adsorption results properly represented with Freundlich isotherm equations. And, pseudo second-order chemisorption kinetic rate equation was applicable to all the biosorption data over the entire time range. The FT-IR analysis showed that the mechanism involved in biosorption of Pb by Chlorella pyrenoidosa was mainly attributed to Pb binding of carbo-acid and amide group. Adsorbed Pb on immobilized Chlorella prenoidosa was easily desorbed in the higher concentration of desorbents(NTA, HCl, EDTA, $H_2SO_4,\;Na_2CO_3$). Among the several desorbents, NTA showed the maximum desoption capacities of Pb from Chlorella pyrenoidosa immobilized with Ca-alginate and K-carrageenan and EDTA was the most effective in Chlorella pyrenoidosa immobilized with polyacrylamide. The desoprtion efficiency in the optimum condition was 90.0, 83.0, and 80.0%, respectively.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2006.02a
• /
• pp.43-78
• /
• 2006

While trust and commitment, essential ingredients of the relationship quality variables, are core mediating variables for the purpose of maintaining the long-term relationship, in the context of the internal political economy of company and the relational performance of its members, there have been limited studies which explore as to how each of the dimensions have affect differently. The basic purpose of this study is to examine the relationship between an automobile manufacturer and its agencies. The main purpose of this study is to examine how each different dimension of trust and commitment on the automobile manufacturer have different mediating effects in the context of internal political economy variables and relational performance perceived by its agents. Another purpose is to investigate the mechanism by which the relational performance of the agencies is improved. An empirical study surveying 115 sales office managers at a leading automobile manufacturer in Korea was conducted. An analysis of the collected data indicates that while internal political economy variables have a positive influence on the agencies' relational performance through the mediating role of trust and commitment, agencies' benevolence on its headquarter has a different influence on the dimensions of commitment. Currently, an automobile manufacturer is advised to implement the relational management philosophy in dealing with its agencies with an hope of innovative orientation for customers. In this sense, this study is a big stride in providing ample implications for the automobile manufacturer in establishing trust and commitment, which are the prerequisite conditions in developing and maintaining a successful long-term relationship with its agencies, and in improving the agency's relational performance.

• Journal of Distribution Research
• /
• v.12 no.4
• /
• pp.49-77
• /
• 2007

The purpose of this study is to examine a relationship between the headquarters and the sales offices of a car manufacturing company by comparing their channel types. It examines how the level of communication and commitment of sales offices on their headquarters differently affects some mediating effects between participation and relationship performance. It also tries to find out what kind of mechanisms are needed in order to improve the relationship. Through the data analysis of a total of 200 sales offices which are directly managed stores and agency stores by a domestic car manufacturing company, the following conclusions were reached: Participation, one of the variables in bureaucratic structuring, influences all dimensions of communication. Also, it has found that communication dimensions influence commitment dimensions differently by the type of channels, and commitment dimensions influence relationship performance by the type of channels. Recently, import car makers are accelerating their moves in the domestic market, and the importance of a customer-oriented retail innovation and a relationship management in an auto manufacturing industry is increasing. This study will give an useful suggestion on how to improve a long term relationship of distributors through an enhancement of communication and commitment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6646-6651
• /
• 2014

This study was carried out to find the social welfare effects of agricultural outlook information service for fruit in Korea. The goals of an agricultural outlook information service are to improve the efficiency of the agricultural product market, and stabilize the farmer's income and consumer price. This paper introduces the results of econometric analysis for the effects of social welfare benefits. According to the results of econometric analysis for the citrus industry, the effects of the social welfare benefits were estimated to be 15,228 million KRW on apples (ratio of the total revenue, 1.5%), 3,154 million KRW on pears (ratio of the total revenue, 1.8%), 1,936 million KRW on peaches (ratio of the total revenue, 0.9%), 5,211 million KRW on grapes (ratio of the total revenue, 1.0%), 44,976 million KRW on citrus (ratio of the total revenue, 5.4%), and 2,590 million KRW on sweet persimmon (ratio of the total revenue, 0.8%) in 2012.