• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.173-176
• /
• 1999

The production of fine metal oxide particles in supercritical water has been studied. Cobalt nitrate solution and manganese nitrate solution have been selected as model solutions for metal salt aqueous solution and the particles of cobalt oxide and manganese oxide have been produced. It was observed that the production of fine metal oxide particles in supercritical water was feasible and the dehydration rate was remarkably high in supercritical water. In spite of a short residence time (3~100 seconds), fine particles ($0.5{\sim}2{\mu}m$) have been produced. In the supercritical water process, the temperature of mixer had a significant effect on particle size and size distribution. It was observed that a change in reaction temperature resulted in the control of particle size.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.96-99
• /
• 2000

In order to improve the rate capability of lithium manganese oxide thin film, we prepared the patterned cathode films by conventional lithography and etching techniques. From the investigation of discharge current density effects on discharge curves of cathode films, the rate capability was greatly improved due to increase of lithium intercalation kinetics fur charge transfer.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.43-46
• /
• 2004

Explosive chemicals have been major soil and groundwater contaminants especially in the nations with active military activities. Of these explosives, 2,4,6-trinitrotoluene (TNT) is the most refractory one due to its structural characteristics. Although its efficient reduction by Fe(0) is well-known, the reduction products - mainly aminotoluenes - still possess toxicities to terrestrial biota, and are resistant to biological degradation. In this study, therefore, abiotic transformation of TNT reduction products via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation efficiency is increased with the number of amino groups. Considering the very efficient reduction rate of TNT by Fe(0), Mn oxide can be successfully used for the removal of TNT reduction products.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.659-664
• /
• 2007

The objective of this study is to evaluate the detoxification method for the endocrine disrupting chemicals by manganese oxide. Manganese coated sand and bisphenol-A (BPA) was used as the reactive medium and the contaminant. Results showed that manganese oxide effectively degrades BPA by oxidative coupling reaction. The nonlinear oxidative coupling reaction orders were obtained for BPA and oxide, respectively. The reaction rate of BPA decreased as initial BPA concentration increased, as oxide loading decreased and as pH increased. The higher ionic strength, the higher reaction rate was observed. Divalent cations were adsorbed on the oxide surfaces, resulting in the decreased degradation rate of BPA.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.477-478
• /
• 2003

에너지 사용의 증대에 따라 대기중으로의 질소산화물 배출양이 증가하고 있으며, 이에 따른 산성비, 광화학 스모그등 많은 피해가 나타나고 있다. 이러한 질소산화물중 고정원에서 배출되는 질소산화물은 선택적 촉매환원법에 의해 제거가 되고 있다. 선택적 촉매 환원법에 사용되고 있는 촉매는 주로 V$_2$O$_{5}$/TiO$_2$ 계열로써 300 ~ 40$0^{\circ}C$ 영역에서 최적의 반응을 보인다(H. Bosch and F. Janssen, 1988). 그러나 촉매의 내구성 증진, 재가열에 따른 에너지 절감등의 이유로 저온에서 우수한 활성을 보이는 촉매의 개발이 필요하다. (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.49-52
• /
• 2005

In this study, abiotic transformation of 1-naphthol via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation of 1-naphthol catalyzed by synthetic birnessite $({\delta}-MnO_2)$ followed pseudo-lst order reaction, and the rate constants was in the range of $0.053{\sim}0.13\;min^{-1}$ with birnessite loadings of $12.5{\sim}50\;mg/20\;mL$. Since the oxidation of 1-naphthol was occurred on the reactive surface of the oxide particles, the rate constants with various birnessite loadings were correlated with birnessite surface area concentration. The correlation showed a strong linearity, which confirms the supposition of the surface reaction. From the correlation, therefore, the surface area normalized rate constant, $k_{surf}$, was determined to be 0.032 $L/m^2\;min$.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.3
• /
• pp.150-155
• /
• 2019

The carbon electrode was modified through manganese-catalyzed hydrogenation method for high energy density vanadium redox flow battery (VRFB). During the catalytic hydrogenation, the manganese oxide deposited at the surface of the carbon electrode stimulated the conversion reaction from carbon to methane gas. This reaction causes the penetration of the manganese and excavates a number of cavities at electrode surface, which increases the electrochemical activity by inducing additional electrochemically active site. The formation of the porous surface was confirmed by the scanning electron microscopy (SEM) images. Finally, the electrochemical performance test of the electrode with the porous surface showed lower polarization and high reversibility in the cathodic reaction compared to the conventional electrode.

• Journal of the Korean Magnetics Society
• /
• v.15 no.4
• /
• pp.236-240
• /
• 2005

The magnetocaloric effect and magnetization behaviors have been studied for $La_{1-x}Pb_{x}MnO_3$ (x=0.1, 0.2, 0.3) alloys. The Curie temperature increased from 195 K to 352 K with increasing Pb concentration. A large magnetic entropy change (${\Delta}S_M$), which is calculated from H vs M curves associated with the ferromagnetic-paramagnetic transitions, has been observed. The maximum ${\Delta}S_M$ of $La_{0.8}Pb_{0.2}MnO_3$ was 1.22 J/kg K at 294 K for an applied field of 1.5 T. Adiabatic temperature change (${\Delta}T_ad$) was measured directly by a special cryostat. The maximum ${\Delta}T_ad$ of $La_{0.7}Pb_{0.3}MnO_3$ was 1.00 K at 352 K for an applied field of 2 T.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.535-542
• /
• 2006

In this study, removals of 1-naphthol by oxidative-coupling reaction using birnessite, one of natural Mn oxides present in soil, was investigated in various experimental conditions(reaction time, Mn oxide loadings, pH, etc). Removal efficiency of 1-naphthol by birnessite was high in all the experimental conditions, and UV-vis. and mass spectrometric analyses on the supernatant after reaction confirmed that the reaction products were oligomers formed by oxidative-coupling reaction. Pseudo-first order rate constants, f, for the oxidative transformation of 1-naphthol by birnessite was derived from the kinetic experiments under various amount of birnessite loadings, and using the observed pseudo-first order rate constants with respect to birnessite loadings, surface area-normalized specific rate constant, $k_{surf}$ was also determined to be $9.31{\times}10^{-4}(L/m^2{\cdot}min)$ for 1-naphthol. In addition, the oxidative transformation of 1-naphthol was found to be dependent on solution pH, and the pseudo-first order rate constants were increased from 0.129 at pH 10 to 0.187 at pH 4.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.479-486
• /
• 2009

In natural environments, manganese (Mn) exists in the valence of +2, +3, and +4 and plays a pivotal role as a strong oxidant or reductant in the geochemical cycles of elements. Especially, Mn forms varying (oxyhydr)oxides. The oxidation state of structural Mn is characteristic to each oxide and is one of the most important factors controlling its geochemical behaviors such as solubility, sorption capacity, and redox potential. Therefore, it is important to elucidate processes governing Mn oxidation state in predicting the fate and transport of many redox sensitive elements in the environment. X-ray photoelectron spectroscopy (XPS) is a very useful method to determine the oxidation state of various elements in solid phases. In this study, the oxidation states of structural Mn in MnO, $Mn_2O_3$, $MnO_2$ were assessed based on the binding energy spectra of $Mn2p_{3/2}$ and Mn3s using XPS and were compared with those reported elsewhere. $Mn2p_{3/2}$ binding energies were determined as 640.9, 641.5, 641.8 eV for MnO, $Mn_2O_3$, $MnO_2$, respectively, which indicates that the binding energy increased with increasing Mn oxidation state. It was also noted that Ar etching may cause changes in electronic structure configuration on surface of the original sample.