• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.18-21
• /
• 1995

막분리에 의한 정수처리에서는 재래식의 응집, 침전, 여과공정을 대신하는 고액분리공정으로서 이용되고 있다. 이러한 막분리를 이용한 정수처리에는 한외여과막 및 정밀여막이 주로 이용되고 있으며, 이러한 막을 이용하므로써 원수중의 고분자성유기물질, 콜로이드물질등을 제거할수 있다. 그러나 미량유기물질과 같은 저분자성물질은 한외여과 및 정밀여과같은 정도의 배제 크기를 가지는 막으로는 분리할수 없다. 따라서 한외여과막 및 정밀여과막으로 분리할수없는 물질들은 역삼투막을 이용하고 있다. 이러한 막을 이용하므로써 응집제의 절약, 부지면적의 절감, 무인운전 및 응집제를 이용하지 않으므로써 알루미늄에의해 기인하는 치매병을 방지할수 있는등 여러가지의 장점이 있다. 특히 분리막을 이용한 정수처리는 프랑스, 미국, 일본 등을 중심으로 연구 개발되었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.23-23
• /
• 1994

환경에 대한 관심이 높아지는 가운데 용존무기염을 효과적으로 분리하기 위한 많은 기술이 연구되고 개발되었다. 이중 막분리를 이용한 무기염의 제거 방법(역삼투법)은 상변화를 수반하지 않는다는 점에서 많은 주목을 받아왔다. 최근들어서는 2가 이상의 염에 대한 선택적 분리 능력을 가지고 있고, 작동압력이 낮아 에너지 소모가 적은 나노여과법(Nanofiltration)이 폐수나 정수처리에 도입되고 있다. 본 연구는 이러한 나노여과법을 이용하여 무기 염을 제거하는 방법에 관한 것이다. 실험에 사용한 분리 막은 Filmtec사의 NF-40, NF-45 두 가지이고 사용한 모듈은 평탄형과 나관형의 두 가지이다. 대상이 되는 폐수는 소석회 처리 단계를 거친 산 폐수로 주로 $Ca^{2+},So_4^{2-}$등의 2가 이온과 Na, Cl등의 1가 이온으로 구성되어 있다. 여기서 $CaSO_4$는 스케일을 형성할 가능성이 크므로 1가 이온에 비해 제거할 필요성이 크지만, 비교적 용해도가 높고 과포화 되는 성질이 커서 처리에 어려움이 있다. 이러한 폐수를 나노여과하였을 때 NF-45 평판평 막의 경우 농축 인자 2.6 부근에서, NF-40 나관평 막의 경우 농축 인자 3 부근에서 막 투과 유속의 급격한 감소가 관찰되었다. 이 때 용액 내 전도도와 용액 내 입자의 분포 변화를 종합하여, 평판형 모듈과 나관형 모듈의 막 오염 현상에 대한 메커니즘을 제시하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.139-146
• /
• 2013

A process diagnosis method for membrane water treatment plant was developed using a constant flux membrane fouling model. This diagnosis method can be applied to a real-field membrane-based water treatment plant as an early alarming system for membrane fouling. The constant flux membrane fouling model was based on the simplest equation form to describe change in trans-membrane pressure (TMP) during the filtration cycle from a literature. The model was verified using a pilot-scale microfiltraton (MF) plant with two commercial MF membrane modules (72 m2 of membrane area). The predicted TMP data were produced using the model, where the modeling parameters were obtained by the least square method using the early plant data and modeling equations. The diagnosis was carried out by comparing the predicted TMP data (as baseline) and real plant data. As a result of the case study, the diagnsis method worked pretty well to predict the early points where fouling started to occur.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.31-32
• /
• 1995

한외여과분리의 중요한 응용분야의 하나인 oil/water 에멀젼의 분리에 대하여 연구하였다. Oil/water 에멀젼의 한외여과분리 원리를 제안하고, 상용되고 있는 하나의 절삭유를 대상으로 분리가능성을 조사하였다. 사용된 한외여과분리 모듈은 상업적으로 이용되고 있는 IRIS 3042 분리막이 장착된 평판형이었다. 한외여과 실험에서 공급압력, 공급유량, 공급에멀젼의 oil농도등을 변화시키면서 투과액의 oil농도, 투과속도등을 측정하여 분리성능을 조사하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.152-158
• /
• 2015

This paper investigated the membrane fouling potential at the state of passive adsorption which is no permeation with the test modules on COD (Chemical oxygen demand) loading rates, examined the recovery rate and resistance on membrane fouling by three cleaning manners of hydrophobic membrane in a bioreactor. The results showed that high COD loading led to the increase of extra-cellular polymeric substances and filtration resistance. The permeability resistance from 1st day to 63rd day was getting increased, however, the value of permeability resistance after 63th day during the operation period was almost same level at three COD loading rates, it was due that the biomass adhesion on membrane surface at the state of passive adsorption reached to the critical state. Also, the final recovery rates after three cleaning manners were 78%, 72% and 69% at the COD loading concentrations of 250 mg/L, 500 mg/L and 750 mg/L respectively, and then recovery rate by physical cleaning at Run 2 and Run 3 was decreased after 40th day, it proved that biomass cake, which is not easily removed, was formed on the membrane surface because of high COD loading rate and EPS concentration.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.448-457
• /
• 1999

Citrus fruits are consumed worldwide due to their unique flavor and nutrition value. It is necessary to remove the haze material as well as to minimize the loss of major compounds such as organic acids, sugars, and ascorbic acid in membrane processes for clarification of juice. The objective of our research was to select the best membrane among one surface filter (Whatman No.4) and five microfiltration filters (GF/A, GF/D, GF/F, Gelman, and SM). Tangerine fresh blended with three times of water was partially clarified with 170 mesh followed by prefiltration in a Samduck filtration system. The best membrane was selected by measuring the amounts of major compounds in the permeates as well as the flux which were statistically analyzed with SAS program. The foulants on the membrane surface were observed by SEM. The flux of GF/A and GF/F decreased with time at probability 0.10. Gelman, SM, and GF/D maintained the stable flux. Gelman showed the highest total scores including nutritive value (the amounts of citrate, malate, and ascorbic acid) and purchasing need (brix and color). Therefore, the microfiltration membrane process was a very effective method in tangerine juice clarification and Gelman type A/E was proved to be the best membrane among the five microfiltration membranes.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.367-373
• /
• 2017

Pressurized membrane module systems, including hollow fiber type of Microfiltration (MF) and Ultrafiltration (UF) membranes are being increasingly used in drinking water treatment due to their high removal efficiency of pathogen. However, when fibers are damaged in pressurized membrane system, the pathogen will be able to penetrate the membrane. Therefore, it is essential to guarantee the regulatory requirements for water quality by an effective on-line or off-line condition integrity monitoring methods. Recently, pressure decay test (PDT) which is one of membrane integrity tests has been reflected to drinking water treatment plants using pressurized membrane module. In this paper, three different method were used to perform PDT and three different sensitivity values were analyzed through experiments. Three types of direct integrity test methods were applied to pressure feed side, filtrate side and bidirectional pressure decay test. The results of these experiments show that the sensitivity was increasing when the volume of pressurized gas was decreasing. The sensitivity is inversely proportional to the gas volume. Furthermore, it is desirable to increase pressure difference between feed side and permeate side in order to achieve higher sensitivity in the PDT by membrane damage.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.131-137
• /
• 2020

In this study, effect of inorganic particles on organic fouling was investigated by a laboratory-scaled pressurized membrane filtration. In order to cause organic fouling, sodium alginate (SA) was used as a feed solution. Regardless of the presence of inorganic SiO₂ particles, the complete pore blocking played an important role in determining the fouling rate during the initial period of membrane filtration. However, the formation of cake layer resulted in the membrane fouling more dominantly as filtration time progressed. In the presence of inorganic particles, both specific cake resistance and compressibility associated with the membrane fouling formed were relatively lower than that without SiO₂ particles. Membrane fouling was more severe at constant flux mode of filtration than that observed at constant pressure mode probably due to the concomitant increase of compressibility of fouling layer with transmembrane pressure (TMP). It was found that the presence of SA and SiO₂ particles in feed solution provided the synergistic effect on the hydraulic backwashing to reduce membrane fouling as compared to the SA solution alone without the inorganic particles.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.507-513
• /
• 1997

To separate and concentrate functional components contained in soybean curd whey, ultrafiltration was performed using regenerated cellulose or polysulphone membrane of spiral-wound type with MWCO 10,000, and the permeate and retentate solutions were analyzed. As the pH of soybean curd whey increased, the permeate flux decreased in both membranes. Treatment of 0.01 M EDTA rather decreased the permeate flux compared with control. The concentration of ionic calcium, which decreased with the pH increase, was thought to affect the permeate flux also. In case of polysulphone membrane, the permeate was efficiently purified and the retentate protein was concentrated significantly in which the membrane rejection value (MRV) for chemical oxygen demand (COD) was 79.25% and that of protein was 98.42% at the volume concentration ratio (VCR) of 10. MRV of the protein of regenerated cellulose membrane was lower than that of polysulphone membrane. To recover oligosaccharides to the permeate solution and increase the content of raffinose and stachyose, regenerated cellulose membrane was more suitable than polysulphone membrane and the optimum VCR was 4.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.73-77
• /
• 2004

막분리 기술인 정밀여과와 한외여과는 물질의 크기 차에 따른 체분리 (sieving)를 기본 원리로 하기 때문에 분자수준에서의 선택적 물질분리가 어렵다는 문제점이 있다. 이러한 문제점을 해결하기 위한 대안으로서 분리막에 분자수준에서의 물질 선택성을 부여한 친화성 막(affinity membrane) 제조에 대한 연구가 활발히 이루어지고 있다.(중략)