• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.905-912
• /
• 2013

Rubber is one of the most commonly used materials in various fields because of its unique viscoelastic properties. Friction occurs when a tire constantly makes contact with the ground. As a result, friction causes wear. The frictional energy caused by friction is a primary factor in the wear mechanism. The frictional energy is affected by various conditions (temperature, roughness of ground, shape of rubber, load, and materials). In this study, the analysis was preceded by considering the vertical load and the horizontal velocity to the rubber using ABAQUS/explicit. The contact pressure, and friction energy are derived using the shear force and slip distance. The actual behavior of the rubber test data were compared with the analysis results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.63-70
• /
• 1994

This study presents the nonlinear dynamic analysis method of the multi-span continuous bridge considering the friction of the expansion bearings. Also the numerical analysis is performed for estimating the effect of the friction on the seismic response of the multi-span continuous bridge under the longitudinal ground motion compatible to Korean bridge design response spectra. It is found that even small friction coefficient of the expansion bearings has significant effect on reducing the superstructure displacement due to energy dissipation and distributing the inertia force of the superstructure to the substructures due to frictional force. It is observed that such favorable friction effects increase as the friction coefficient increases and the magnitude of the ground motion decreases. Therefore, the friction of the expansion bearings can be effectively used for the safe and economic design of the continuous span bridge with many spans and large superstructure weight under the small to medium scale longitudinal ground motions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.613-618
• /
• 2008

본 연구에서는 개수로 마찰흐름 특성에 관한 연구로서 유량조사사업단(2006)의 우리나라 3대강 유역 하천자료와 미국의 Colorado지역 록키산맥 하천 관측자료를 통하여 개수로의 흐름특성을 집중적으로 검토하였다. 개수로 설계에 있어 수로의 흐름해석 및 마찰계수의 정확한 산정은 수로설계의 근간이 된다. 하지만 일반적으로 사용하고 있는 Manning(1889)식은 개수로 흐름특성을 판단하기에 너무 단순하여 상이한 결과를 보임에도 불구하고 단순성에 기인하여 사용되는 것으로 판단된다. Bazin(1865)과 Varwick(1945)의 개수로 실험결과를 보면 Nikuradse(1933)의 원형관수로 실험결과와 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 가지의 흐름특성이 존재함을 알 수 있다. 또한, 개수로 마찰계수의 특성변화를 보면 조고 또는 조도가 증가함에 따라 마찰계수가 상향으로 평행 이동하는 것을 볼 수 있다. 실험결과로부터 확인되는 이러한 흐름 특성이 현장에서도 분명히 나타날 것으로 판단하며 이러한 가설에 근거하여 각 하천의 관측자료를 분석하였다. 유량조사사업단의 우리나라 3대강 유역 하천 관측자료(2006)를 레이놀즈수의 함수인 완난류 흐름으로 전제하고 물의 기본적인 성질과 하천의 경사, 수심, 조고 등의 영향을 고려한 무차원수를 도입하여 마찰계수의 2차적인 분포특성을 파악하고자 하였다. 하지만 관측된 자료로부터 무차원수를 도입하여 산정된 마찰계수분포를 보면 마찰계수가 급격히 증가하고 추정된 유속과 관측된 유속을 비교하면 추정된 유속이 산개되는 경향이 나타났다. 이러한 문제점은 유량관측시 관측지점의 수면경사 및 하상경사의 미관측으로 하천정비기본계획상에 제시된 지형으로부터 하상경사를 추정하여 마찰계수와 유속을 산정하였다. 또한 하천정비기본계획상에 제시된 Manning의 조도계수를 이용하여 Ganguillet&Kutter(1869) 산정식과 Manning(1889) 산정식으로 부터 유속을 산정한 결과 오차가 크게 발생한 것을 확인하였으며, 실제 관측자료에 적합하도록 조도계수를 재 산정하였다. 논문의 분량 제한상 분석과정은 추후 논문에 제시하기로 하고 분석결과와 수위관측에서의 문제점을 제시하였다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2015

Ultra High Performance Fiber Reinforced Concrete (UHPFRC) is distinguished from the normal concrete by outstanding compressive and tensile strength. Cracked normal concrete resists shear by aggregate interlocking while clamped by transverse reinforcement, which is called as shear friction theory. Cracked UHPFRC is expected to have a different shear transfer mechanism due to rather smooth crack face and post-cracking behavior under tensile force. Twenty-four push-off specimens with transverse reinforcement are tested for four different fiber volume ratio and three different ratio of reinforcement along the shear plane. The shear friction strength for monolithic concrete are suggested by limit analysis of plasticity and verified by test results. Plastic analysis gives a conservative, but reasonable estimate. The suggested shear friction factor and effectiveness factor of UHPFRC can be applied for interface shear transfer design of high-strength concrete and fiber reinforced concrete with post-cracking tensile strength.

• Composites Research
• /
• v.27 no.1
• /
• pp.31-36
• /
• 2014

This paper presents the slip behavior of composite fabrics by high speed resin flow in high pressure resin transfer molding. In order to observe the fiber deformation behavior, we constructed the measuring equipment for friction coefficient between fiber and mold, and the monitoring system for deformation of fiber preform in high-pressure RTM process. Coulomb friction coefficient and hydrodynamic friction coefficient between fiber preform and mold were measured and the external force induced by fluid flow causing the deformation of fiber preform was measured. Friction force calculated by friction coefficient and the external force upon fiber deformation were compared, which showed that preform deformation occurred when the external force was bigger than the friction force. The slip behavior of the fiber preform was mainly influenced by the volume fraction of fiber preform and the friction coefficient.

• Journal of Science Education
• /
• v.42 no.2
• /
• pp.120-131
• /
• 2018

The purpose of this study is to examine the characteristics of science gifted students' understanding of friction acting on a rolling object, and to examine the implications of teaching methods that can be derived from them. For this purpose, 48 students in grade 3 students who take advanced physics classes at the science high school for the gifted were asked to answer three questions about the friction problems. As a result, students' responses were divided into three types: rule, none-rule, and calculation. In addition, students of the rule type have difficulty in reasoning about the friction by using friction rules. We believe that students will be able to reach a deeper understanding of friction if we teach them to correctly infer the direction of friction without using friction rules, along with a strategy to emphasize relative motion in contact.

• Science of Emotion and Sensibility
• /
• v.8 no.4
• /
• pp.385-391
• /
• 2005

A frictional coefficients of in-vivo skin characteristic is the most important factor of the cutaneous mechanical properties ant the method of evaluating skin care in the fields of cosmetics products. In-vivo skin characteristic varies in many different ways depends on what is applied to the skin, loading condition, shape, surface roughness, and material of the probe. In this research, we designed a system which can be measured frictional coefficients of a human skin on real time. It consists of multi-components load-cell, actuator, linear motor and arm fixator. This measurement system was automatically controlled by computer. We measured frictional coefficients between probe an4 skin using this system ant inquired adjectives for subjective evaluation while rubbing cosmetic product on skin. Lastly, we analyzed correlation between two factors by calculating Pearson Correlation Coefficient. As a result, we could know that frictional coefficients varied from 0.17-1.2 according to cosmetic products, normal forte, materials and surface conditions of probe. We also confirmed sensual feelings of cosmetic products have close correlation with frictional coefficients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.593-598
• /
• 2008

It was made a friction material of various kinds by adding 10%, 20% and 30% of reduced iron. It was obtained by a connected-reduced process in a blast furnace sludge and oxidized iron, instead of $BaSO_4$, which is already a used inorganic filling material among a component of a brake friction material. This was done by a basic physical property test, a friction performance test to use a brake dynamometer. Moreover, in case of an add in the friction material, instead of using $BaSO_4$, the more expensive filling material, the reduced iron was also better because it has an excellent a friction property of an exothermic temperature, wear, etc. was 10%. At G1 and G3 specimens, a shear strength and a bonding strength of the friction material was decreased to be able to increase an amount of the blast furnace sludge and the reduced iron, but an application of all friction materials appeared enough strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.617-631
• /
• 2019

In the four-step demand model, a gravity mode is used most commonly at the trip distribution stage. The purpose of this study was to develop a new friction factor that can express the accessibility property as a single friction factor to compensate for the variable limits of the gravity model parameters (travel time, travel cost). To derive a new friction factor, a new friction factor was derived using the space syntax that can quantify the characteristics of the urban space structure, deriving the link-unit integration degree and then using the travel time and travel distance relationship. Calibration of the derived friction factor resulted in a similar level to that of the existing friction factor. As a result of verifying the various indicators, the explanatory power was found to be excellent in the short - and long - distance range. Therefore, it is possible to derive and apply the new friction factor using the integration index, which can complement the accessibility beyond the limit of the existing shortest distance, and it is believed to be more advantageous in future utilization.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2019

We have developed the multi-functioned friction measuring instrument for the previous research. In here, we improved the performance of friction measuring instrument by applying the adaptive smoothing method and analyzed the friction of plate and monitoring function of friction surface through scratch tests. We substituted lubricant steel plate to lubricant oil used for reducing the friction when fabricating steel plate because lubricant oil was regarded as one of the major causes for the environmental pollution. In particular, the functions of various plate such as galvannealed steel sheets were analyzed because friction coefficient could be changed depending on the type of organic/inorganic plate or state of coating layer. Therefore, we demonstrated that adaptive smoothing method could enhance the accuracy of measuring instrument which eliminate the noise. As a result of using the method, it showed the reduction rate 0.0417% for the friction coefficient 0.16.