• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.51-57
• /
• 2014

Ultrasonic imprinting is a novel process for replicating micropatterns on thermoplastic polymer substrates with low energy consumption and short cycle time. The polymer substrate is softened by the frictional heat and repetitive deformation energy under ultrasonic excitation; thus, a number of micropatterns are replicated on the softened polymer substrate. In the present work, the effect of mold temperature on the replication characteristics of ultrasonic imprinting is investigated. The temperature change in the patterned region is measured by varying the mold temperature. Numerical simulation is then performed for investigating pattern replication characteristics under various mold temperatures. In addition, pattern replication ratio and uniformity are compared through various experimental measurements. Through the results of these comparisons, it is found that the mold temperature has a significant positive effect on the replication characteristics of ultrasonic imprinting.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.122-122
• /
• 2018

1. 배경 최근 IoT 기술이 발전함에 따라 각종 전자기기에 들어가는 센서들이 점점 늘어나고 있다. 특히 사용자 중심의 기기들은 기술이 발전함에 따라 집적화가 이루어지면서, 하나의 기기에서 온도, 습도, 조도 등의 다양한 정보를 처리하고 있다. 이에 따라 더 많은 기능을 사용하기 위해, 소모 전력 또한 점차 증가하고 있다. 그러나 부피는 한정되어 있어, 기존 배터리만으로는 증가하는 소모 전력을 모두 보완하기 어렵다. 또한 대표적인 사용자 중심 기기인 스마트폰에서는, 가장 많은 전력을 소모하는 부분이 점점 커지고 있다. 이에 대한 대책으로 버려지는 에너지를 수확하여 전기적인 에너지로 바꿔주는 에너지 하베스팅 기술이 각광을 받고 있다. 에너지 하베스팅 기술은 바람, 진동, 인체의 움직임 등의 기계적 에너지, 태양광, 실내등의 빛 에너지를 전기적인 에너지로 바꿔주는 기술을 말한다. 본 연구에서는 강유전체 고분자 내부에 양자점이 임베딩된 박막을 이용하여, 스마트폰에서 발생하는 빛 에너지와 손가락으로 디스플레이를 터치할 때 발생하는 기계적인 에너지를 모두 수확할 수 있는 새로운 소자를 제시하였다. 소자 내부에 있는 양자점은 빛 에너지를 산란 혹은 흡수하여 발광한 후, 고분자 내부의 전반사를 통해 양 옆에 있는 태양전지로 빛을 전달한다. 또한 컴포짓의 매트릭스를 이루고 있는 강유전체 폴리머인 P(VDF-TrFE)는 강유전 특성을 통해 마찰전기 에너지를 효율적으로 전기 에너지로 전환할 수 있다. 강유전체 특성에 의해 P(VDF-TrFE) 내부에 정렬된 Polarization은 퀀텀닷에 양자구속 스타크 효과(Quantum Confined Stark Effect)를 일으켜 더 긴 파장을 방출한다. 이렇게 바뀐 파장은 실리콘 태양전지에서 더 많이 흡수할 수 있는 영역으로 방출되어 태양전지 출력의 증가를 일으킨다. 마지막으로 실리콘 태양전지의 출력 증가를 보여줌으로써 이를 실험적으로 입증했다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.13-22
• /
• 2004

In case of the lateral movement accurring at soft ground where a row of piles are installed, the crown failure at external arch zone of soil arching is firstly developed, and the cap failure at wedge zone in front of piles is lastly developed. Therefore, the lateral earth pressure acting on a row of piles due to soil movement should be calculated in each condition of crown and cap failures around piles. A theoretical equation of crown failure can be proposed using a cylindrical cavity expansion theory. The theoretical equation of crown failure is mainly affected by two factors. One is related to soil properties such as internal friction angle, cohesion and horizontal pressure, and the other is related to pile factors such as diameter, installation interval. Meanwhile, the yield range of lateral earth pressure is established in the estimation of theoretical equation based on crown and cap failures around piles. The theoretical values based on crown and cap failures are compared with the experimental values. The experimental values are located in the range proposed by theoretical values. Thus, it is confirmed that the theoretical values proposed in the study are very reasonable.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.5
• /
• pp.380-387
• /
• 2016

Present research target to develop the procedure of long-term fatigue analysis of the structural details near the upper rolling chock of IMO type B tank by using the time domain modal analysis technique where both the contact and friction behavior can be accurately simulated. In order to perform the time domain analysis focused on the contact and friction, the entire model of the hull and tank was condensed with DOF reduction technique, which is obtained by transforming the global finite element model into its quasi-static modal coordinate. Modal analysis using the quasi-static deformation modes is chosen as a cost effective time domain simulation method and this is based on the fact that the structural response of the tank is quasi-static. Based on the developed cost effective time domain simulation method, the long-term fatigue analysis procedure for the structural details near the rolling chock and key of independent type tank is targeted to be established. The developed fatigue assessment procedure takes into account, wave induced stress and both contact and friction induced stress without loss of accuracy.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.542-548
• /
• 2005

A fluidized bed reactor containing porous media has been known to be effective for nitrogen and organic matters removal in wastewater. The porous media which attached microbes plays important roles in simultaneous nitrification/denitrification (SND) due to coexistence of oxic, anaerobic and anoxic zone. For SND reaction, oxygen and organic substrates should be effectively diffused from wastewater into the intra-carrier zone. However, the overgrowth heterotrophic microbes at the surface of porous media may restrict from substrates diffusion. From these viewpoints, the existence and effect of heterotrophic bacteria at surface of porous media might be the key point for nitrogen removal. A porous media-membrane hybrid process was found to have improved nitrogen removal efficiency, due to stimulated denitrification as well as nitrification. Microelectrode studies revealed that although intra-media denitrification rate in a conventional fluidized bed was limited by organic carbon, this limitation was reduced in the hybrid process, resulting in the increased denitrification rate from 0.5 to $4.2\; mgNO_3-N/L/hr$.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.17-27
• /
• 1999

It comes to be an important point to judge precisely the effects of excavation on adjacent ground and structures. It is incorrect to evaluate the ground settlement by excavation without considering the adjacent structure. In this study, laboratory scale tests were carried out by varying the position of structure under the condition of different system stiffness and wall friction to evaluate the behavior of adjacent structures and ground by excavation. When the distance between the structures and the wall was less than 0.3 times of the excavation depth, the ground settlement increased by 181%. No additional effect was observed when the distance was more than 1.0H. As the embedded depth was deeper, the influence zone was smaller, and few additional settlements and angular displacement were observed when the embedded depth was more than 0.75H.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.3
• /
• pp.109-119
• /
• 1998

A horizontal tow-dimensional version of POM (Princeton Ocean Model) was modified in representing the bottom friction and the open boundary conditions. To simulate the flooding and drying of intertidal flats, a wetting-and-drying scheme was incorporated into the model. The model then was applied to the Chunsu Bay and its adjacent coastal water. Only the water movement due to tides, the dominant forcing in the study area, was considered. This presents the procedure and the results of model calibration and verification for the Chunsu Bay system. The model was calibrated, using the average tidal characteristics in Tide Tables, for the amplitudes and the phases of tidal waves throughout the modeling domain. Calibration results showed that the model gave a good reproduction of tidal waves. The calibrated model was verified using the time-series measurements of surface elevation and current velocity in the summer of 1995. The model reproduced the tides currents very well. calibration and verification results demonstrated that the model is capable of reproducing the tidal dynamics in the Chunsu Bay system.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.370-375
• /
• 2015

In this study, to confirm the effect of alloying elements on the phase transformation and conditions of the friction stir process, we processed two materials, SS400 and SM45C steels, by a friction stir process (FSP) under various conditions. We analyzed the mechanical properties and microstructure of the friction stir processed zone of SS400 and SM45C steels processed under 400RPM - 100mm/min conditions. We detected no macro (tunnel defect) or micro (void, micro crack) defects in the specimens. The grain refinement in the specimens occurred by dynamic recrystallization and stirring. The microstructure at the friction stir processed zone of the SS400 specimen consisted of an ${\alpha}$-phase. On the other hand, the microstructure at the friction stir processed zone of the SM45 specimen consisted of an ${\alpha}$-phase, $Fe_3C$ and martensite due to a high cooling rate and high carbon content. Furthermore, the hardness and impact absorption energy of the friction stir processed zone were higher than those of base metals. The hardness and impact absorption energy of FSPed SM45C were higher than that of FSPed SS400. Our results confirmed the effect of alloying elements on the phase transformation and mechanical properties of the friction stir processed zone.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.241-242
• /
• 2009

There are marry ships and marine structures and also has marry differences on according to the shape and the interval of hulls to the purpose. the multi-submerged body needs appropriate distance between the hulls because of the optimum hull form. thus, through this paper, the flow characteristics behind the multi-submerged body according os the distance ration between the hulls and various angles of attack was conducted.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.1
• /
• pp.99-109
• /
• 2021

With the recent development of ICT, information exchange through data communication network is increasing. Cryptography is widely used as the base technology to protect it. The initial cryptography technology was developed for military use and authorized only by the nation in the past. However, nowadays, much of the authority was unwillingly transferred to the private due to the pervasive use of ICT. As a result, there have been conflicts between the private demand to use cryptography and the nation's authority. In this paper, we survey the conflicts between nations and the private in the process of formulating the cryptography policy. Morever, we investigate the reality of the cryptography policy in Korea. Our investigations are expected to help the government apply cryptographic control policy in a balanced manner and plan development of cryptography industries. Lastly, we propose a need to establish a cryptanalysis organization and to legislate a legal sanction against fraudulent use of cryptography.