• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.235-239
• /
• 2011

도시지역은 수자원 공급의 문제를 해결하기 위해서 많은 노력이 이루어지고 있으나 최근 기상 이변과 같은 문제점들로 인하여 용수 공급이 안정적이지 못한 실정이다. 기후적 영향을 적게 받는 지하수의 경우는 비교적 지속적이고 안정적인 수자원으로 많이 이용되고 있으나 이 또한 관리적인 측면의 여러 가지 문제점으로 인하여 어려움을 겪고 있다. 특히 도시지역은 지하수이용량이 많아 지하수개발에 대한 명확한 체계가 이루어지지 않으면 과잉양수로 인한 지하수위 저하로 용수부족, 지하수질 악화 등과 같은 지하수 재해를 일으킬 수 있으며 해안지역일 경우 해수침투로 인하여 그 피해가 광범위하고 장기간으로 확산될 수 있다. 따라서 지하수의 개발 및 관리를 위해서는 지하수 유동에 대한 분석이 이루어져야 효율적인 지하수 이용이 가능하다. 도시지역 지하수 유동의 경우 지하수함양과 지하수유출뿐만 아니라 지속적으로 변화하는 요소들인 지하수이용량, 상하수도 누수량, 지하철로 인한 유출량 등과 같은 도시화 요소들도 고려하여야 한다. 그러나 이러한 요소들을 명확하게 규명하는 것은 매우 어렵다. 지하수자원의 개발 이용 및 관리가 가장 절실히 필요한 곳이 도시지역이라는 점을 감안하면 지하수 유동 분석에 관한 연구는 반드시 필요하며 수문계측 기술의 향상과 관련 분야에 대한 지속적인 연구들도 함께 이루어져서 해석의 정확도가 높아져야만 원활한 수자원 공급과 효율적인 체계 관리가 가능할 것이다. 본 연구에서는 도시지역의 지하수유동특성을 살펴보기 위하여 부산광역시 수영구를 대상으로 도시화 요소를 고려한 지하수 모델링을 통하여 지하수 유동을 분석하였다. 정상상태 지하수 유동 모의를 실시한 결과 지하수위는 산지가 분포하고 있는 북서쪽으로 갈수 록 높아지고 수영강과 남해쪽으로 갈수록 낮아지며 지하수 유동도 내륙에서 수영강 및 남해로 유출되고 있는 모습을 나타내었다. 도시화 요소를 고려한 비정상상태 지하수 유동 모의 결과 수영강 및 남해에서 내륙으로 지하수가 유입되는 형태를 나타내고 있었다. 지하수위 또한 내륙으로 갈수록 낮아지는 형상을 나타내고 있었으며 대량의 양수량의 관정이 위치하는 수영로타리 일대와 광안동 지역, 지하철유출량이 많은 망미역 부근, 전력구 터널 공사로 인한 지하수 유출량이 있는 일부지역에서는 급격하게 지하수위가 낮아지는 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.1-6
• /
• 1999

Hundred pieces of peat woods(ca. 2500 years old) were excavated in 1995 at Hyunwhari, Pyungtaek in the west-central coast of the Korea Peninsula. Among them, 63 samples representing 21 trenches were selected for the species identification. Because most peat woods were rotten by fungi for long period, only 27 samples could be identified. Due to the deteriorated structure of peat woods, all samples were embedded in PEG(polyethylene glycol 2000) and then sectioned using a rotary microtome. Major species were Alnus spp.(55.6%), Fraxinus spp.(33.3%) and Quercus (Lepidobalanus)(11.1%). No conifers were found. The species composition indicates that the sample region was a swamp or lakeside, which appeared to be formed because of the sea-level rise after last-glacial period.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.211-212
• /
• 2011

플라즈마를 제어하기 위해서는 플라즈마의 온도, 밀도, 에너지 분포등과 같은 플라즈마의 특성을 정확히 측정할 수 있어야한다. 핵융합발전에서는 플라즈마를 발생하기 위하여 플라즈마의 온도, 밀도 등 각종 변수들을 시공간적으로 계측, 분석할 수 있는 진달설비를 사용하고 있으며, 정확한 플라즈마 제어와 측정을 위한 새로운 진단기술을 개발하고 있다. 그리고 중요한 변수중에 하나인 플라즈마 이온온도를 측정하기 위해 중성입자 검출법이 잘 알려져 있다. 이 실험은 수소 중성입자가 토카막 내부의 플라즈마 이온과 충돌하면서 생성된 고속 중성입자의 에너지를 분석하는 실험이다. 본 연구의 실험방법은 수소 중성입자를 이온빔 장치에서 이온화 시킨 후 자체 제작한 가속기를 통하여 가속시켜 에너지 특성을 분석을 하는 것이다. 본 연구의 실험장치로 에너지 교정용 100 keV 이온빔 소스를 제작 하였고 이온빔 장치 내부에 수소기체를 주입하고 기체방전을 일으켜 플라즈마를 발생시켰다. 이온빔 외부에는 팬을 설치하고 전도성이 강한 물 대신 전도성이 약한 오일을 사용하여 냉각 하였다. 이온빔 장치와 결합될 이온 가속장치는 지름 300 mm, 두께 2 mm의 원형 구리판을 여러층으로 쌓아 전극으로 제작하였고 전극과 전극 사이에서 코로나 방전과 스파크를 방지하기 위해 전극 둘레에 코로나링을 설치 하였다. 또한 전극 사이마다 1G${\Omega}$의 저항을 설치한 후 고전압을 생성하여 이온 가속 효율을 증대시켰다. 진공시스템으로는 Alcatel사의 CFF100 터보분자 펌프와 우성진공사의 MVP24 진공로타리펌프를 결합하여 사용하였으며, 진공도측정은 Alcatel사의 ACS1000 장치를 사용하였다. 고진공후 고속 중성입자의 이온화와 에너지 측정을 위한 전하교환기를 설치하였다. 전하교환기로는 진공시스템을 별도로 설치하고 비용이 비교적 많이 드는 기체형 전하교환기 대신 소형화가 가능하고 유지보수가 좋은 고체형 전하교환기 제작하여 실험 하였다. 전하교환기에서 이온화된 고속 중성입자가 전기장이나 자장에 영향을 받았을때 에너지분포를 디텍터를 통해 측정하였다. 즉, 이온화된 중성입자의 에너지가 실리콘 다이오드를 통해 전압 펄스 신호로 변환되고 이차 증폭기를 통해 전압 펄스 신호들이 증폭한다. 에너지 측정을 위한 디텍터는 소형화가 가능하고 비용이 비교적 적게 드는 실리콘 다이오드를 설치하였다. 본 연구결과 중성입자 에너지 분석 장치가 실제 핵융합 장치의 플라즈마 이온온도와 특성 측정에 적용할 수 있으며, 앞으로 개발될 여러 형태의 응용 플라즈마 발생장치의 플라즈마 진단에 이용될 것으로 기대한다.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.103-111
• /
• 2003

This study proposes methodology deterimining a basic pedestrian crossing capacity that plays a critical role in the installation of pedestrian signal at the crosswalks. The methodology is based on the pattern of vehicle arrived at the crosswalks. Erlang distribuion is used as headway distribution that can cover the various levels of flow rate. Models using Erlang distribution are represented by Erlang parameter (K) of 1, 2, or 3 at 2-, 4-, or 6-lane roadway in both directions. In addition, this study considered the only type of road with a pedestrian refuge area in the median that is used to wait for the allowable gap provided by the flow of another direction. As a result, the pedestrian capacity decreases as flow rate increases and Erlang parameter increases for the road with the pedestrian refuge. This study develops the models to determine the pedestrian capacity under a variety of flow rates and the outcomes of this study could be used as the criteria for the determination of the installation of pedestrian signal or for the provision of pedestrian refuge in the median of road.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.739-744
• /
• 1998

Changes of volatile flavor compounds in sesame oil during industrial process (roasting temp. $225{\pm}2^{\circ}C$, roasting time 15 min) were investigated. Total volatile flavor compounds of 1 st expressed oil from roasted sesame seeds were 536.3 ppm, and those of 2nd expressed oil from sesame seed cake, residue of 1st expression, were 266.8 ppm. Those of 1st filtered oil, fixed oil and 2nd filtered oil were 472.2 ppm, 472.4 ppm and 443.0 ppm, respectively. Volatile flavor compounds were gradually decreased during processing. Top notes $(peak{\;}No.1{\sim}26)$ playing an important role in the aromatic character of sesame oil, of 2nd expressed oil were markedly reduced (70.67% of initial content). Especially pyrazine compounds showed the largest reduction in 2nd expressed oil. Total volatile flavor compounds of fixed oil, filtered oil were reduced slightly.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.97-103
• /
• 2004

This study was performed to assess the influences of liquid pig manure (LPM) on the rice growth and nutrient behavior in soil under two different drainage comditions. Soils of paddy field were Jeonbuk and Gangseo series, and drainage conditions of the soils were imperfectly drained and moderate well drained, respectively, Application of LPM was based on nitrogen, and the treatments included 110 (LPM-N100%), 165 (LPM-N150%) and $220(LPM-N200%)kg\;N\;ha^{-1}$. In the LPM-N150% treatment, rice growth and yield were similar to the control treatment of conventional chemical fertilizer application. Rice yield of moderately well drainedfield were 3-11% higher than that of imperfectly drained field. Loss of nitrogen through $NH_3$ gas after application of LPM was higher in no plowing than in rotary plowing field. Losses of $NO_3-N$, $NH_4-N$, $SO_4$, Ca and K through runoff water were increased as the amount of LPM application increased. Losses of $NO_3-N$ and K through infiltration were higher in LPM-150% and LPM-N200% treatments compared to the chemical fertilizer treatment. Contents of $NO_3-N$ in infiltration water measured from trasplanting to tillering stage was higher at the moderately well drained condition than imperfectly drained condition. Contents of $P_2O_5$ and K in soil were accumulated by application of LPM compared to the chemical fertilizer plot.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.58-63
• /
• 2014

Variety of volatile materials is present in crude-Zinc oxide recovered from EAFD(Electric arc furnace steel dust). Commonly, it is purified by oxidizing roasting. In this study, spherical each specimen prepared crude-zinc oxide like 1~3 mm and 10 mm was tested in vertical tube furnace at the temperature range $600^{\circ}C$ to $1200^{\circ}C$ in oxidizing atmosphere. Oxidizing roasting properties of zinc oxide were investigated using XRD, XRF and ICP-OES. At temperature blow $950^{\circ}C$ volatilization rate were remarkably low. As the temperature increases, the concentration of Zn increased and the concentration and XRD peaks of impurities decreased. The result indicated that volatilization rate depended on specimen size and roasting temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.264-270
• /
• 2008

Ecological lightweight aggregates were made by using the wastes come from various industrial fields. Wastes were crushed and pulverized by mills and a certain portions of wastes were mixed and formed by pelletizer like small beads. The formed lightweight aggregates were finally sintered with $1125^{\circ}C$/15 min conditions by using rotary kiln. Lightweight concrete sound absorbers were made of ecological lightweight aggregates K73 (Coal bottom ash 70 wt%: Dredged soil 30 wt%) and K631 (Clay 60 wt%: Stone sludge 30 wt%: Spent bleaching clay 10 wt%). For the reference, lightweight concrete sound absorbers made of DL (German made 'L' company LWA) were also made under the same conditions. Sound absorption characteristics were observed and measured according to the kinds of aggregates, water/cement ratio (W/C=20, 25, and 30%), and designed pore rates (V=20, 25, and 30%). The pore rates of the lightweight concrete sound absorber were turned out to be 5 to 10% higher than designed ones. Absorption coefficient of the lightweight concrete sound absorber by using K631 aggregates with W/C=20% and V=25% conditions was 0.88 at 1000 and 3150 Hz from the measurement by the impedance tube.