• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.139-140
• /
• 2015

고객의 잠재적 가치를 포착하는 것은 특별히 새로운 제품이나 서비스 또는 새로운 비즈니스를 시작하는 서비스 디자이너에게 매우 중요한 작업이다. 가치 포착은 고객 간, 컨텐스트 간 그리고 다른 시간환경 속에서 차별화를 추구하며 심사숙고하는 서비스 디자이너에게 새로운 컨셉 접근방법을 제시한다. 서비스디자인을 위한 차별화 컨셉 프레임은 사용의 해석적 분석을 가이드하는 관점과 렌즈를 제공하여 고객 행동 가치를 유형화하고, 그러한 결과는 복합적인 서비스디자인의 가치를 향상시킨다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.2
• /
• pp.22-28
• /
• 1993

In this paper, the ultrasonic transducer with a spherical liquid lens is designed and an efficient method to calculate the acoustic field radiated from the transducer is presented. A prototype ultrasonic transducer with a spherical liquid lens is constructed and tested. The experimental results are compared with those of the computer simulations and good agreements are achieved. The dynamic control of the geometric focus is obtained by adjusting the radius of curvature of the lens membrane with the volumetric control of the liquid in the lens.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1348-1358
• /
• 1989

We analyzed electrostatic lens with axi-symmetic configurations using the analytic equation for a single apertured lens. The developed computer code afforded to estimate ion optical properties such as ion trajectories, aberrations and ion beam diameters, and was found to have advantages of a shorter calculation time. The calculated ion optical properties for several types of electrostatic lens were in good agreement with Burghard's ones and it was seem that 20% reduction of ion beam diameter could be obtained by the change of aperture diameters.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.110-111
• /
• 2000

여기 파워는 고체 레이저 매질 내부에 열을 발생시킨다. 매질 내부에서 발생한 열은 매질 표면을 따라 냉각이 진행되어 매질 내부에서는 불균일한 온도분포가 발생하게 된다. 레이저 매질의 굴절율은 온도에 따라 변하기 때문에 열복굴절 현상과 열렌즈 현상이 일어나 레이저 출력의 손실, 빔질의 저하를 유발하고 열적 스트레스는 매질의 손상 및 모드 동기된 극초단 펄스가 넓어지는 등의 문제를 초래한다. 선형 편광 광선을 이용하는 고체 레이저에서 열복굴절에 의해 레이저 출력이 약 30 %까지 감소하므로 레이저 공진기를 구성하는데 있어서 정량적인 열영향의 해석이 필요하다. 열복굴절에 의해 발생한 손실량은 다음과 같이 표현할 수 있다. (중략)

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.1-5
• /
• 2010

This paper deals with a method to measure the thickness of scale-layer, iron oxide formed on the surface of the rolling steel, using a dielectric lens antenna. The dielectric lens antenna has an independent characteristic with the frequency in the X-band and changes the spherical wave radiated from a horn antenna into a plane wave at the focusing point. Using this concept, we regard a scale-layer on the rolling steel as a dielectric-PEC(Perfect Electric Conductor) layer and apply a theoretical analysis of the normal-incident plane wave. To reduce the phase error arising from the use of the dielectric lens antenna, this paper utilizes a regression process algorithm. In comparison with the conventional iteration algorithm, the present algorithm led to a unique solution for the thickness of the scale-layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.608-608
• /
• 2013

직선운동하는 하전입자의 진행방향에 수직한 평면상에 서로 직교하는 전기장과 자기장을 걸어주면, 하전입자에는 전기장에 의한 힘 $F_E$와 자기장과 속도 v에 의한 로렌츠력 $F_B=q(v{\times}B)$가 동시에 작용하게 된다. 이때 Wien 조건 $F_B=-F_E$를 만족하는 질량 $m_A$과, 에너지 $E_A$를 가지는 하전입자 A는 휘지 않고 직선운동을 계속하나, 하전입자 A와 다른 에너지 $E_B(=E_A+{\delta}E)$나 질량 $m_B$ $(=m_A+{\delta}m)$을 가지는 하전입자는 휘게 되며, 그 휘는 정도는 ${\delta}E$나 ${\delta}m$에 비례하게 된다. 이 현상을 이용하여 다양한 종류의 에너지 또는 질량 분석기가 독일, 미국, 일본 등의 분석기기 선진국에서 개발되어 왔고, 전자현미경의 이미지 필터로도 활용되고 있으며, 통상 EXB 필터 또는 발명자의 이름을 딴 Wien 필터로 불리어지고 있다. $E{\times}B$ 필터는 일반적인 하전입자빔 렌즈와 다른 광학특성을 가진다. 예를 들면 3차 이상의 기하 수차만 가지는 일반 렌즈와는 달리 $F_B$, $F_E$ 전자기력에 의해 다양한 2차 기하 수차를 가지게 되며, 초점거리 등의 1차 광학 특성도 일반 렌즈와는 다른 경향을 보여준다. 본 발표에서는 $E{\times}B$ 필터의 전후로 각각 6극자+4극자를 조합시킨 보정기를 배치시켜 필터의 에너지 분해능의 성능을 향상시킬 수 있음을 빔 궤도 방정식을 분석적으로 계산하여 보여준다. 위 에너지 필터 구성에서 4극자는 1차 광학 특성을 조정하는 역할을 하며 6극자는 2차 수차를 줄여주는 역할을 한다. 수치해석을 통해서는 6극자+4극자를 조합시킨 보정기와 $E{\times}B$ 필터의 좀더 정확한 전극 전압 등의 제어 수치를 추출하고, 빔 궤도 방정식 분석을 통한 수차 보정 알고리즘이 유효함을 보여준다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2571-2578
• /
• 2014

In this paper, we propose a computational generation method of elemental images for time-multiplexed 3D integral imaging display based lens division. In the proposed method, we analyze the image formation between 3D object and elemental images based on ray optics. Based on the analyzed formation, we generate the elemental image set for time-multiplexed display. Positions of an object point picked up in proposed method is shifted for half size of lens divided from those in conventional method when generating elemental images. To show the usefulness of the proposed method, we carry out the preliminary experiments and present the results.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2019

In this paper, a new study was performed on the docking of AUV to docking station using light and light sensor system under the water. For this, a guiding system for AUV loading sensor system composed of lense, light sensor, signal processor, and processor and docking system with LED are proposed. An analysis on light sensor system and light-collecting lense to obtain accurate relative angle and measurement accuracy was performed. To prove this, the system was built and a basic experiment was performed. Finally, the feasibility of the developed docking system was verified the test in the water tank.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.93-98
• /
• 2015

This study focuses on simulation technology in the injection molding process for plastic optic lenses. The CAE program 3D TIMON was used to predict retardation, flow patterns and warpage deformation. The results were compared to the results of optic lenses as measured using the WPA-100 retardation measurement device with injection molding CAE for retardation predictions. According to the analysis and measured results, the distributions of retardation between the CAE results and the measurement results were similar. It was also confirmed that varying the injection speed had an effect on the injection pressure, warpage deformation and retardation distribution. As the injection speed increases, the injection pressure also increases and warpage deformation decreases. However, as the injection speed increases, the retardation distribution deteriorates.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.50-55
• /
• 2007

The purpose of this research is to enhance the luminance of the LED and to improve the implementation of color by mounting an array lens on the LED without special technology in process. The workmanship of key components considering the economical efficiency and the injection molding technology for high quality of the product are essential to achieve it. In this paper, the mold was computer-aided was designed and manufactured by CAM software (NX4) and high speed machining center. the applied final machining conditions were 3,000-5,000mm/min feed speed, 15,000-25,000rpm and ${\Phi}0.3mm$ ball end-mill. And the Flow analysis was performed using the mold flow software(MPI) in order to get uniformity of resin. Injection conditions acquired by the flow analysis and the injection experiment are as follows. The cylinder temperature is $220-260^{\circ}C$, the mold temperature is $70-80^{\circ}C$, the injection time is about 1.2sec, the injection pressure and velocity is each 7.8-14.7Mpa, and the injection velocity is 0.8-1.2m/sec.