• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.119-124
• /
• 2009

In this paper, AMR-WB+ audio coder is implemented, in real-time, using Intel 400MHz Xscale PXA250 with 32bit RISC processor ARM9E-J(R)core. The assembly code for ARM9E-J(R)core is developed through the serial process of C code optimization, cross compile, assembly code manual optimization and adjusting the optimized code to Embedded Visual C++ platform. C code is trimmed on Visual C++ platform. Cross compile and assembly code manual optimization are performed on CodeWarrior with ARM compiler. Through these stages the code for both ARM EVM board and PDA is implemented. The average complexities of the code are 160.75MHz on encoder and 33.05MHz on decoder. In case of static link library(SLL), the required memories are 65.21Kbyte, 32.01Kbyte and 279.81Kbyte on encoder, decoder and common sources, respectively. The implemented coder is evaluated using 16 test vectors given by 3GPP to verify the bit-exactness of the coder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1210-1217
• /
• 2004

LILI-II stream cipher is an upgraded version of the LILI-128, one of candidates in NESSIE. Since the algorithm is a clock-controlled, the speed of the keystream data is degraded structurally in a clock-synchronized hardware logic design. Accordingly, this paper proposes a 4-bit parallel LFSR, where each register bit includes four variable data routines for feedback or shifting within the LFSR. furthermore, the timing of the proposed design is simulated using a Max+plus II from the ALTERA Co., the logic circuit is implemented for an FPGA device (EPF10K20RC240-3), and apply to the Lucent ASIC device (LV160C, 0.13${\mu}{\textrm}{m}$ CMOS ＆ 1.5v technology), and it could achieve a throughput of about 500 Mbps with a 0.13${\mu}{\textrm}{m}$ semiconductor for the maximum path delay below 1.8㎱. Finally, we propose the m-parallel implementation of LILI-II, throughput with 4, 8 or 16 Gbps (m=8, 16 or 32).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2433-2438
• /
• 2011

Bus system consists of several masters, slaves, arbiter and decoder in a bus. Master means the processor that performs data command like CPU, DMA, DSP and slave means the memory that responds the data command like SRAM, SDRAM and register. Furthermore, as multiple masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, bus system performance can be changed definitely. Fixed priority and round-robin are used in general arbitration method and TDMA and Lottery bus methods are proposed currently as the improved arbitration schemes. In this study, we proposed the score arbitration method and synthesized it using Hynix 0.18um technology, after design of RTL. Also we analyze the performance compared with general arbitration methods through simulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.102-107
• /
• 2007

This paper proposes a H.264/AVC entropy decoder without embedded processor nor memory fabrication process. Many researches on H.264/AVC entropy decoders require ROM or RAM fabrication process, which is difficult to be implemented in general digital logic fabrication process. Furthermore, many researches require embedded processors for bitstream manipulation, which increases area and power consumption. This papers proposes hardwired H.264/AVC entropy decoder without embedded processor, which improves data processing speed and reduces power consumption. Furthermore, its CAVLC decoder optimizes lookup table and internal buffer without embedded memory, which reduces hardware size and can be implemented in general digital logic fabrication process without ROM or RAM fabrication process. Designed entropy decoder was embedded in H.264/AVC video decoder, and it was verified to operate correctly in the system. Synthesized in TSMC 90nm fabrication process, its maximum operation frequency is 125MHz. It supports QCIF, CIF, and QVGA image format. Under slight modification of nC register and other blocks, it also support VGA image format.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.79-85
• /
• 2005

In this paper, low-power design and implementation techniques for IMT-2000 interpolation filter are proposed. Processor technique for DA(Distributed Arithmetic) filter and minimization technique for number of addition in CSD(Canonic Signed Digit) filter are utilized for low-power implementation. proposed filter structure consists of 3 blocks. In the first CSD coefficient block, every possible 4 bit CSD coefficients are calculated and stored. In second processor block, multiplication is done by MUX and addition processor in terms of filter coefficient. Finally, in third shift register block, multiplied values are output and stored in shift register. For IMT-2000 interpolation filter, proposed and conventional structures are implemented by using Verilog-HDL coding. Gate counts for the proposed structure is reduced to 31.57% comparison with those of the conventional one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.23-32
• /
• 2005

The automatic generation of circuit diagrams has been practically used in the HDL based design for decades. Nevertheless, the diagrams became too complicated for the designers to identify the signal flows in the RTL and system level designs. In this paper, we propose four techniques to enhance the roadability of the complicated diagrams. They include i) the transformation of repetitive instances and terminals into vector forms, ii) an improved loop breaking algorithm, iii) a flat tap which simplifies the two level bus ripping structure that is required for the connection of a bundle net to multiple buses, and iv) the identification of block strings, and alignment of the corresponding blocks. Towards validating the proposed techniques, the diagrams of an industrial strength design m generated. The complexity of the diagrams has been reduced by up to $90\%$ in terms of the number of wires, the aggregate wire length, and the area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.24-31
• /
• 2010

A receiver architecture with low complexity for chirp spread spectrum (CSS) of IEEE 802.15.4a is proposed. To demodulate the received signal at the highest signal to noise power ratio, matched filter is generally adopted for the receiver of wireless communication systems. It is, however, not resonable to adjust the matched filter to the receiver of CSS whose objectives are low complexity, low cost and low power consumption since complexity of the matched filter is high. In this paper, we propose a new receiver architecture using differential multiplication and accumulator not matched filter for demodulation. Also, bi-orthogonal decoder implemented by only adder/subtractor is proposed. The hardware resources for implementation are reduced in the proposed receiver architecture, although bit error rate performance is low compared with the receiver architecture based on the matched filter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.44-49
• /
• 2008

We have proposed a clock recovery circuit for 13.56MHz RFID Tags using 100%, ASK RF input signal. The proposed clock recovery circuit generates clock pulses without reference clock by adapting register controlled DLL. The proposed circuit have designed by using a TSMC 0.18um 1P6M CMOS technology. The simulated results show that the phase locking time of the proposed circuit is about 6.4 usec and power consumption is about 43uW at supply voltage of 3.3V.